Tensile Force for Butt Weld Joint Calculator

✖Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.ⓘ Tensile Stress [σ_t]			+10% -10%
✖Weld Bed Area is that area which is prepared by joining two metals for welding.ⓘ Weld Bed Area [A_{weld bed}]			+10% -10%

✖Tensile force in butt weld is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity.ⓘ Tensile Force for Butt Weld Joint [F_tensile]

⎘ Copy

👎

Formula

✖

Tensile Force for Butt Weld Joint

Formula

`"F"_{"tensile"} = "σ"_{"t"}*"A"_{"weld bed"}`

Example

`"28.8kN"="32MPa"*"900mm²"`

Calculator

LaTeX

Reset

👍

Download Strength of Materials Formula PDF

Tensile Force for Butt Weld Joint Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Force in Butt Weld = Tensile Stress*Weld Bed Area
F_tensile = σ_t*A_{weld bed}
This formula uses 3 Variables

Variables Used

Tensile Force in Butt Weld - (Measured in Newton) - Tensile force in butt weld is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity.
Tensile Stress - (Measured in Pascal) - Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.
Weld Bed Area - (Measured in Square Meter) - Weld Bed Area is that area which is prepared by joining two metals for welding.

STEP 1: Convert Input(s) to Base Unit

Tensile Stress: 32 Megapascal --> 32000000 Pascal (Check conversion here)
Weld Bed Area: 900 Square Millimeter --> 0.0009 Square Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F_tensile = σ_t*A_{weld bed} --> 32000000*0.0009

Evaluating ... ...

F_tensile = 28800

STEP 3: Convert Result to Output's Unit

28800 Newton -->28.8 Kilonewton (Check conversion here)

FINAL ANSWER

28.8 Kilonewton <-- Tensile Force in Butt Weld

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Welded Joints » Types of Welded Joints » Tensile Force for Butt Weld Joint

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< 18 Types of Welded Joints Calculators

Allowable Tensile Stress given Tensile Strength for Single Fillet Lap Joint

Go Tensile Stress = Tensile Strength/(0.707*Length of Weld*Thickness of Plate)

Allowable Tensile Stress given Tensile Strength of Double Fillet Lap

Go Tensile Stress = Tensile Strength/(1.414*Length of Weld*Thickness of Plate)

Tensile Stress given Tensile Force and Length of Weld

Go Tensile Stress = Tensile Force in Butt Weld/(Length of Weld*Depth of Weld)

Depth of Weld given Tensile Force for Butt Weld Joint

Go Depth of Weld = Tensile Force in Butt Weld/(Tensile Stress*Length of Weld)

Tensile Strength of Single Fillet Lap Joint

Go Tensile Strength = 0.707*Tensile Stress*Length of Weld*Thickness of Plate

Tensile Strength of Double Fillet Lap

Go Tensile Strength = 1.414*Tensile Stress*Length of Weld*Thickness of Plate

Tensile Force for Butt Weld Joint given Length of Weld

Go Tensile Force in Butt Weld = Tensile Stress*Length of Weld*Depth of Weld

Tensile Stress given Tensile Strength of Double Fillet Lap and Area of Double Fillet Weld

Go Tensile Stress = Tensile Strength/(Area of Double Fillet Weld)

Tensile Stress given Tensile Strength of Single Fillet Lap and Area of Single Fillet Weld

Go Tensile Stress = Tensile Strength/(Area of Single Fillet Weld)

Tensile Strength of Double Fillet Lap given Area of Double Fillet Weld

Go Tensile Strength = Tensile Stress*Area of Double Fillet Weld

Tensile Strength of Single Fillet Lap given Area of Single Fillet Weld

Go Tensile Strength = Tensile Stress*Area of Single Fillet Weld

Tensile Stress given Tensile Force for Butt Weld Joint

Go Tensile Stress = Tensile Force in Butt Weld/Weld Bed Area

Area of Weld given Tensile Force for Butt Weld Joint

Go Weld Bed Area = Tensile Force in Butt Weld/Tensile Stress

Tensile Force for Butt Weld Joint

Go Tensile Force in Butt Weld = Tensile Stress*Weld Bed Area

Throat Thickness given Area of Fillet Weld for Double Fillet Lap Joint

Go Throat Thickness = Weld Bed Area/(2*Length of Weld)

Throat Thickness given Area of Parallel Fillet Weld

Go Throat Thickness = Weld Bed Area/(2*Length of Weld)

Throat Thickness given Area of Fillet Weld for Single Fillet Lap Joint

Go Throat Thickness = Weld Bed Area/Length of Weld

Throat Thickness for Fillet Weld

Go Throat Thickness = 0.707*Thickness of Plate

Tensile Force for Butt Weld Joint Formula

Tensile Force in Butt Weld = Tensile Stress*Weld Bed Area
F_tensile = σ_t*A_{weld bed}

What is tensile strength with example?

Tensile strength is a measurement of the force required to pull something such as rope, wire, or a structural beam to the point where it breaks. The tensile strength of a material is the maximum amount of tensile stress that it can take before failure, for example, breaking.

How to Calculate Tensile Force for Butt Weld Joint?

Tensile Force for Butt Weld Joint calculator uses Tensile Force in Butt Weld = Tensile Stress*Weld Bed Area to calculate the Tensile Force in Butt Weld, Tensile force for butt weld joint is the stretching forces acting on the material and has two components namely, tensile stress and tensile strain. Tensile Force in Butt Weld is denoted by F_tensile symbol.

How to calculate Tensile Force for Butt Weld Joint using this online calculator? To use this online calculator for Tensile Force for Butt Weld Joint, enter Tensile Stress (σ_t) & Weld Bed Area (A_{weld bed}) and hit the calculate button. Here is how the Tensile Force for Butt Weld Joint calculation can be explained with given input values -> 0.0288 = 32000000*0.0009.

FAQ

What is Tensile Force for Butt Weld Joint?

Tensile force for butt weld joint is the stretching forces acting on the material and has two components namely, tensile stress and tensile strain and is represented as F_tensile = σ_t*A_{weld bed} or Tensile Force in Butt Weld = Tensile Stress*Weld Bed Area. Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force & Weld Bed Area is that area which is prepared by joining two metals for welding.

How to calculate Tensile Force for Butt Weld Joint?

Tensile force for butt weld joint is the stretching forces acting on the material and has two components namely, tensile stress and tensile strain is calculated using Tensile Force in Butt Weld = Tensile Stress*Weld Bed Area. To calculate Tensile Force for Butt Weld Joint, you need Tensile Stress (σ_t) & Weld Bed Area (A_{weld bed}). With our tool, you need to enter the respective value for Tensile Stress & Weld Bed Area and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tensile Force in Butt Weld?

In this formula, Tensile Force in Butt Weld uses Tensile Stress & Weld Bed Area. We can use 1 other way(s) to calculate the same, which is/are as follows -

Tensile Force in Butt Weld = Tensile Stress*Length of Weld*Depth of Weld

Home

FREE PDFs

🔍 Search