Tensile Force for Butt Weld Joint given Length of Weld Calculator

✖Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.ⓘ Tensile Stress [σ_t]			+10% -10%
✖The Length of Weld is the linear distance of each weld segment.ⓘ Length of Weld [l]			+10% -10%
✖Depth of weld is equal to the thickness of plate.ⓘ Depth of Weld [t]			+10% -10%

✖Tensile force in butt weld is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity.ⓘ Tensile Force for Butt Weld Joint given Length of Weld [F_tensile]

⎘ Copy

👎

Formula

✖

Tensile Force for Butt Weld Joint given Length of Weld

Formula

`"F"_{"tensile"} = "σ"_{"t"}*"l"*"t"`

Example

`"1.0752kN"="32MPa"*"8mm"*"4.2mm"`

Calculator

LaTeX

Reset

👍

Download Strength of Materials Formula PDF

Tensile Force for Butt Weld Joint given Length of Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Force in Butt Weld = Tensile Stress*Length of Weld*Depth of Weld
F_tensile = σ_t*l*t
This formula uses 4 Variables

Variables Used

Tensile Force in Butt Weld - (Measured in Newton) - Tensile force in butt weld is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity.
Tensile Stress - (Measured in Pascal) - Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of each weld segment.
Depth of Weld - (Measured in Meter) - Depth of weld is equal to the thickness of plate.

STEP 1: Convert Input(s) to Base Unit

Tensile Stress: 32 Megapascal --> 32000000 Pascal (Check conversion here)
Length of Weld: 8 Millimeter --> 0.008 Meter (Check conversion here)
Depth of Weld: 4.2 Millimeter --> 0.0042 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F_tensile = σ_t*l*t --> 32000000*0.008*0.0042

Evaluating ... ...

F_tensile = 1075.2

STEP 3: Convert Result to Output's Unit

1075.2 Newton -->1.0752 Kilonewton (Check conversion here)

FINAL ANSWER

1.0752 Kilonewton <-- Tensile Force in Butt Weld

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Strength of Materials » Welded Joints » Types of Welded Joints » Tensile Force for Butt Weld Joint given Length of Weld

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< 18 Types of Welded Joints Calculators

Allowable Tensile Stress given Tensile Strength for Single Fillet Lap Joint

Go Tensile Stress = Tensile Strength/(0.707*Length of Weld*Thickness of Plate)

Allowable Tensile Stress given Tensile Strength of Double Fillet Lap

Go Tensile Stress = Tensile Strength/(1.414*Length of Weld*Thickness of Plate)

Tensile Stress given Tensile Force and Length of Weld

Go Tensile Stress = Tensile Force in Butt Weld/(Length of Weld*Depth of Weld)

Depth of Weld given Tensile Force for Butt Weld Joint

Go Depth of Weld = Tensile Force in Butt Weld/(Tensile Stress*Length of Weld)

Tensile Strength of Single Fillet Lap Joint

Go Tensile Strength = 0.707*Tensile Stress*Length of Weld*Thickness of Plate

Tensile Strength of Double Fillet Lap

Go Tensile Strength = 1.414*Tensile Stress*Length of Weld*Thickness of Plate

Tensile Force for Butt Weld Joint given Length of Weld

Go Tensile Force in Butt Weld = Tensile Stress*Length of Weld*Depth of Weld

Tensile Stress given Tensile Strength of Double Fillet Lap and Area of Double Fillet Weld

Go Tensile Stress = Tensile Strength/(Area of Double Fillet Weld)

Tensile Stress given Tensile Strength of Single Fillet Lap and Area of Single Fillet Weld

Go Tensile Stress = Tensile Strength/(Area of Single Fillet Weld)

Tensile Strength of Double Fillet Lap given Area of Double Fillet Weld

Go Tensile Strength = Tensile Stress*Area of Double Fillet Weld

Tensile Strength of Single Fillet Lap given Area of Single Fillet Weld

Go Tensile Strength = Tensile Stress*Area of Single Fillet Weld

Tensile Stress given Tensile Force for Butt Weld Joint

Go Tensile Stress = Tensile Force in Butt Weld/Weld Bed Area

Area of Weld given Tensile Force for Butt Weld Joint

Go Weld Bed Area = Tensile Force in Butt Weld/Tensile Stress

Tensile Force for Butt Weld Joint

Go Tensile Force in Butt Weld = Tensile Stress*Weld Bed Area

Throat Thickness given Area of Fillet Weld for Double Fillet Lap Joint

Go Throat Thickness = Weld Bed Area/(2*Length of Weld)

Throat Thickness given Area of Parallel Fillet Weld

Go Throat Thickness = Weld Bed Area/(2*Length of Weld)

Throat Thickness given Area of Fillet Weld for Single Fillet Lap Joint

Go Throat Thickness = Weld Bed Area/Length of Weld

Throat Thickness for Fillet Weld

Go Throat Thickness = 0.707*Thickness of Plate

Tensile Force for Butt Weld Joint given Length of Weld Formula

Tensile Force in Butt Weld = Tensile Stress*Length of Weld*Depth of Weld
F_tensile = σ_t*l*t

What is tensile strength with example?

Tensile strength is a measurement of the force required to pull something such as rope, wire, or a structural beam to the point where it breaks. The tensile strength of a material is the maximum amount of tensile stress that it can take before failure, for example breaking.

How to Calculate Tensile Force for Butt Weld Joint given Length of Weld?

Tensile Force for Butt Weld Joint given Length of Weld calculator uses Tensile Force in Butt Weld = Tensile Stress*Length of Weld*Depth of Weld to calculate the Tensile Force in Butt Weld, Tensile force for butt weld joint given length of weld is defined as the stretching forces acting on the material and has two components namely, tensile stress and tensile strain. Tensile Force in Butt Weld is denoted by F_tensile symbol.

How to calculate Tensile Force for Butt Weld Joint given Length of Weld using this online calculator? To use this online calculator for Tensile Force for Butt Weld Joint given Length of Weld, enter Tensile Stress (σ_t), Length of Weld (l) & Depth of Weld (t) and hit the calculate button. Here is how the Tensile Force for Butt Weld Joint given Length of Weld calculation can be explained with given input values -> 0.001075 = 32000000*0.008*0.0042.

FAQ

What is Tensile Force for Butt Weld Joint given Length of Weld?

Tensile force for butt weld joint given length of weld is defined as the stretching forces acting on the material and has two components namely, tensile stress and tensile strain and is represented as F_tensile = σ_t*l*t or Tensile Force in Butt Weld = Tensile Stress*Length of Weld*Depth of Weld. Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force, The Length of Weld is the linear distance of each weld segment & Depth of weld is equal to the thickness of plate.

How to calculate Tensile Force for Butt Weld Joint given Length of Weld?

Tensile force for butt weld joint given length of weld is defined as the stretching forces acting on the material and has two components namely, tensile stress and tensile strain is calculated using Tensile Force in Butt Weld = Tensile Stress*Length of Weld*Depth of Weld. To calculate Tensile Force for Butt Weld Joint given Length of Weld, you need Tensile Stress (σ_t), Length of Weld (l) & Depth of Weld (t). With our tool, you need to enter the respective value for Tensile Stress, Length of Weld & Depth of Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tensile Force in Butt Weld?

In this formula, Tensile Force in Butt Weld uses Tensile Stress, Length of Weld & Depth of Weld. We can use 1 other way(s) to calculate the same, which is/are as follows -

Tensile Force in Butt Weld = Tensile Stress*Weld Bed Area

Home

FREE PDFs

🔍 Search