Thickness of Plate given safe tensile load that plate can withstand Calculator

✖Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen.ⓘ Tensile Load [P_load]			+10% -10%
✖Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.ⓘ Tensile Stress [σ_t]			+10% -10%
✖Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.ⓘ Pitch of Rivet [p]			+10% -10%
✖Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.ⓘ Rivet Diameter [D_rivet]			+10% -10%

✖The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.ⓘ Thickness of Plate given safe tensile load that plate can withstand [t_plate]

⎘ Copy

👎

Formula

✖

Thickness of Plate given safe tensile load that plate can withstand

Formula

`"t"_{"plate"} = "P"_{"load"}/("σ"_{"t"}*("p"-"D"_{"rivet"}))`

Example

`"34.68208mm"="0.012kN"/("0.173000MPa"*("20mm"-"18mm"))`

Calculator

LaTeX

Reset

👍

Download Strength of Materials Formula PDF

Thickness of Plate given safe tensile load that plate can withstand Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickness of Plate = Tensile Load/(Tensile Stress*(Pitch of Rivet-Rivet Diameter))
t_plate = P_load/(σ_t*(p-D_rivet))
This formula uses 5 Variables

Variables Used

Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.
Tensile Load - (Measured in Newton) - Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen.
Tensile Stress - (Measured in Pascal) - Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.
Pitch of Rivet - (Measured in Meter) - Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.
Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.

STEP 1: Convert Input(s) to Base Unit

Tensile Load: 0.012 Kilonewton --> 12 Newton (Check conversion here)
Tensile Stress: 0.173 Megapascal --> 173000 Pascal (Check conversion here)
Pitch of Rivet: 20 Millimeter --> 0.02 Meter (Check conversion here)
Rivet Diameter: 18 Millimeter --> 0.018 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_plate = P_load/(σ_t*(p-D_rivet)) --> 12/(173000*(0.02-0.018))

Evaluating ... ...

t_plate = 0.0346820809248555

STEP 3: Convert Result to Output's Unit

0.0346820809248555 Meter -->34.6820809248555 Millimeter (Check conversion here)

FINAL ANSWER

34.6820809248555 ≈ 34.68208 Millimeter <-- Thickness of Plate

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Strength of Materials » Riveted Joint » Failure Of A Riveted Joint » Failure Due To Tearing Of The Plate Between Rivets Of A Row » Thickness of Plate given safe tensile load that plate can withstand

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< 8 Failure Due To Tearing Of The Plate Between Rivets Of A Row Calculators

Thickness of Plate given safe tensile load that plate can withstand

Go Thickness of Plate = Tensile Load/(Tensile Stress*(Pitch of Rivet-Rivet Diameter))

Diameter of rivet given safe tensile load that plate can withstand

Go Rivet Diameter = Pitch of Rivet-(Tensile Load/(Tensile Stress*Thickness of Plate))

Pitch of rivet given safe tensile load that plate can withstand

Go Pitch of Rivet = (Tensile Load/(Tensile Stress*Thickness of Plate))+Rivet Diameter

Safe tensile stress in plate

Go Tensile Stress = Tensile Load/((Pitch of Rivet-Rivet Diameter)*Thickness of Plate)

Safe tensile load that plate can withstand

Go Tensile Load = Tensile Stress*(Pitch of Rivet-Rivet Diameter)*Thickness of Plate

Area of plate for given safe tensile load that plate can withstand

Go Area of Base Plate = Tensile Load/Tensile Stress

Safe tensile load that plate can withstand given area of plate

Go Tensile Load = Tensile Stress*Area of Base Plate

Safe tensile stress given area of base plate and tensile load

Go Tensile Stress = Tensile Load/Area of Base Plate

Thickness of Plate given safe tensile load that plate can withstand Formula

Thickness of Plate = Tensile Load/(Tensile Stress*(Pitch of Rivet-Rivet Diameter))
t_plate = P_load/(σ_t*(p-D_rivet))

What are rivets used for?

Rivets are ideal for supporting shear and tensile loads, as well as watertight applications. A rivet is a mechanical fastener consisting of a smooth, cylindrical shaft with a head. Upon installation, the end of the shaft expands, creating a “shop head” and fastening objects in place.

How to Calculate Thickness of Plate given safe tensile load that plate can withstand?

Thickness of Plate given safe tensile load that plate can withstand calculator uses Thickness of Plate = Tensile Load/(Tensile Stress*(Pitch of Rivet-Rivet Diameter)) to calculate the Thickness of Plate, The Thickness of Plate given safe tensile load that plate can withstand formula is defined as the thickness of the material of the plate for the rivet. Thickness of Plate is denoted by t_plate symbol.

How to calculate Thickness of Plate given safe tensile load that plate can withstand using this online calculator? To use this online calculator for Thickness of Plate given safe tensile load that plate can withstand, enter Tensile Load (P_load), Tensile Stress (σ_t), Pitch of Rivet (p) & Rivet Diameter (D_rivet) and hit the calculate button. Here is how the Thickness of Plate given safe tensile load that plate can withstand calculation can be explained with given input values -> 2.8E+7 = 12/(173000*(0.02-0.018)).

FAQ

What is Thickness of Plate given safe tensile load that plate can withstand?

The Thickness of Plate given safe tensile load that plate can withstand formula is defined as the thickness of the material of the plate for the rivet and is represented as t_plate = P_load/(σ_t*(p-D_rivet)) or Thickness of Plate = Tensile Load/(Tensile Stress*(Pitch of Rivet-Rivet Diameter)). Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen, Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force, Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member & Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.

How to calculate Thickness of Plate given safe tensile load that plate can withstand?

The Thickness of Plate given safe tensile load that plate can withstand formula is defined as the thickness of the material of the plate for the rivet is calculated using Thickness of Plate = Tensile Load/(Tensile Stress*(Pitch of Rivet-Rivet Diameter)). To calculate Thickness of Plate given safe tensile load that plate can withstand, you need Tensile Load (P_load), Tensile Stress (σ_t), Pitch of Rivet (p) & Rivet Diameter (D_rivet). With our tool, you need to enter the respective value for Tensile Load, Tensile Stress, Pitch of Rivet & Rivet Diameter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search