Thickness of Plate given Tensile Stress in Transverse Fillet Weld Calculator

✖Load on transverse fillet weld is the force or the load applied perpendicular to the specimen cross-section.ⓘ Load on Transverse Fillet Weld [P_t]			+10% -10%
✖The Length of Weld is the linear distance of the welding segment joined by the welded joint.ⓘ Length of Weld [L]			+10% -10%
✖Tensile Stress in Transverse Fillet Weld is the stress occurred in the transverse fillet welds when it is subjected to a tensile force trying to generate a pull in the welded area.ⓘ Tensile Stress in Transverse Fillet Weld [σ_t]			+10% -10%

✖Thickness of Transverse Fillet Welded Plate is defined as the thickness of the plate (usually the lowest dimension of the plate) which is welded using a transverse fillet weld.ⓘ Thickness of Plate given Tensile Stress in Transverse Fillet Weld [t]

⎘ Copy

👎

Formula

✖

Thickness of Plate given Tensile Stress in Transverse Fillet Weld

Formula

`"t" = "P"_{"t"}/("L"*"σ"_{"t"})`

Example

`"15.04819mm"="165.5kN"/("195mm"*"56.4N/mm²")`

Calculator

LaTeX

Reset

👍

Download Transverse Fillet Weld Formulas PDF

Thickness of Plate given Tensile Stress in Transverse Fillet Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickness of Transverse Fillet Welded Plate = Load on Transverse Fillet Weld/(Length of Weld*Tensile Stress in Transverse Fillet Weld)
t = P_t/(L*σ_t)
This formula uses 4 Variables

Variables Used

Thickness of Transverse Fillet Welded Plate - (Measured in Meter) - Thickness of Transverse Fillet Welded Plate is defined as the thickness of the plate (usually the lowest dimension of the plate) which is welded using a transverse fillet weld.
Load on Transverse Fillet Weld - (Measured in Newton) - Load on transverse fillet weld is the force or the load applied perpendicular to the specimen cross-section.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of the welding segment joined by the welded joint.
Tensile Stress in Transverse Fillet Weld - (Measured in Pascal) - Tensile Stress in Transverse Fillet Weld is the stress occurred in the transverse fillet welds when it is subjected to a tensile force trying to generate a pull in the welded area.

STEP 1: Convert Input(s) to Base Unit

Load on Transverse Fillet Weld: 165.5 Kilonewton --> 165500 Newton (Check conversion here)
Length of Weld: 195 Millimeter --> 0.195 Meter (Check conversion here)
Tensile Stress in Transverse Fillet Weld: 56.4 Newton per Square Millimeter --> 56400000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t = P_t/(L*σ_t) --> 165500/(0.195*56400000)

Evaluating ... ...

t = 0.0150481905801055

STEP 3: Convert Result to Output's Unit

0.0150481905801055 Meter -->15.0481905801055 Millimeter (Check conversion here)

FINAL ANSWER

15.0481905801055 ≈ 15.04819 Millimeter <-- Thickness of Transverse Fillet Welded Plate

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Welded Joints » Transverse Fillet Weld » Thickness of Plate given Tensile Stress in Transverse Fillet Weld

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< 16 Transverse Fillet Weld Calculators

Force Acting given Shear Stress-induced in Plane that is Inclined at angle theta

Go Load on Double Transverse Fillet Weld = (Shear Stress in Transverse Fillet Weld*Leg of Weld*Length of Weld)/(sin(Weld Cut Angle)*(sin(Weld Cut Angle)+cos(Weld Cut Angle)))

Length of Weld given Shear Stress-induced in Plane that is inclined at Angle theta

Go Length of Weld = Load on Double Transverse Fillet Weld*sin(Weld Cut Angle)*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Shear Stress in Transverse Fillet Weld*Leg of Weld)

Shear Stress-Induced in Plane that is inclined at Angle theta to Horizontal

Go Shear Stress in Transverse Fillet Weld = Load on Double Transverse Fillet Weld*sin(Weld Cut Angle)*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Leg of Weld*Length of Weld)

Leg of Weld given Shear Stress-induced in Plane

Go Leg of Weld = Load on Double Transverse Fillet Weld*sin(Weld Cut Angle)*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Shear Stress in Transverse Fillet Weld*Length of Weld)

Thickness of Plate given Tensile Stress in Transverse Fillet Weld

Go Thickness of Transverse Fillet Welded Plate = Load on Transverse Fillet Weld/(Length of Weld*Tensile Stress in Transverse Fillet Weld)

Length of weld given Tensile Stress in Transverse Fillet Weld

Go Length of Weld = Load on Transverse Fillet Weld/(0.707*Leg of Weld*Tensile Stress in Transverse Fillet Weld)

Tensile Stress in Transverse Fillet Weld given Leg of Weld

Go Tensile Stress in Transverse Fillet Weld = Load on Transverse Fillet Weld/(0.707*Leg of Weld*Length of Weld)

Tensile Stress in Transverse Fillet Weld

Go Tensile Stress in Transverse Fillet Weld = Load on Transverse Fillet Weld/(0.707*Leg of Weld*Length of Weld)

Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld

Go Load on Transverse Fillet Weld = Tensile Stress in Transverse Fillet Weld*0.707*Leg of Weld*Length of Weld

Permissible Tensile Strength for Double Transverse Fillet Joint

Go Tensile Stress in Transverse Fillet Weld = Load on Weld/(1.414*Length of Fillet Weld*Length of Weld)

Maximum Shear Stress-induced in Plane that is Inclined at Angle theta

Go Maximum Shear Stress in Transverse Fillet Weld = 1.21*Load on Weld/(Leg of Weld*Length of Weld)

Length of Weld given Maximum Shear Stress-induced in Plane

Go Length of Weld = 1.21*Load on Weld/(Leg of Weld*Maximum Shear Stress in Transverse Fillet Weld)

Maximum Shear Stress-induced given Allowable Load per mm length of Transverse Fillet Weld

Go Maximum Shear Stress in Transverse Fillet Weld = Load per Unit Length in Transverse Fillet Weld/(0.8284*Leg of Weld)

Leg of Weld given Allowable Lod per mm Length of Transverse Fillet Weld

Go Leg of Weld = Load per Unit Length in Transverse Fillet Weld/(0.8284*Maximum Shear Stress in Transverse Fillet Weld)

Leg of Weld given Maximum Shear Stress-induced in Plane

Go Leg of Weld = 1.21*Load per Unit Length in Transverse Fillet Weld/(Maximum Shear Stress in Transverse Fillet Weld)

Allowable Load per mm Length of Transverse Fillet Weld

Go Load per Unit Length in Transverse Fillet Weld = 0.8284*Leg of Weld*Maximum Shear Stress in Transverse Fillet Weld

Thickness of Plate given Tensile Stress in Transverse Fillet Weld Formula

Thickness of Transverse Fillet Welded Plate = Load on Transverse Fillet Weld/(Length of Weld*Tensile Stress in Transverse Fillet Weld)
t = P_t/(L*σ_t)

what is the throat of the weld?

The throat is the shortest distance from the root to the face of the weld. To measure this dimension in a regular miter or flat-faced fillet weld is relatively simple. The shape is that of an isosceles triangle, the throat being 0.7 of the leg length, also the throat
is the minimum cross-section of the weld located at 45° to the leg dimension.

How to Calculate Thickness of Plate given Tensile Stress in Transverse Fillet Weld?

Thickness of Plate given Tensile Stress in Transverse Fillet Weld calculator uses Thickness of Transverse Fillet Welded Plate = Load on Transverse Fillet Weld/(Length of Weld*Tensile Stress in Transverse Fillet Weld) to calculate the Thickness of Transverse Fillet Welded Plate, The thickness of Plate given Tensile Stress in Transverse Fillet Weld is the actual thickness of the plate to be welded and as a rule, the leg length h is equal to the plate thickness. Thickness of Transverse Fillet Welded Plate is denoted by t symbol.

How to calculate Thickness of Plate given Tensile Stress in Transverse Fillet Weld using this online calculator? To use this online calculator for Thickness of Plate given Tensile Stress in Transverse Fillet Weld, enter Load on Transverse Fillet Weld (P_t), Length of Weld (L) & Tensile Stress in Transverse Fillet Weld (σ_t) and hit the calculate button. Here is how the Thickness of Plate given Tensile Stress in Transverse Fillet Weld calculation can be explained with given input values -> 150481.9 = 165500/(0.195*56400000).

FAQ

What is Thickness of Plate given Tensile Stress in Transverse Fillet Weld?

The thickness of Plate given Tensile Stress in Transverse Fillet Weld is the actual thickness of the plate to be welded and as a rule, the leg length h is equal to the plate thickness and is represented as t = P_t/(L*σ_t) or Thickness of Transverse Fillet Welded Plate = Load on Transverse Fillet Weld/(Length of Weld*Tensile Stress in Transverse Fillet Weld). Load on transverse fillet weld is the force or the load applied perpendicular to the specimen cross-section, The Length of Weld is the linear distance of the welding segment joined by the welded joint & Tensile Stress in Transverse Fillet Weld is the stress occurred in the transverse fillet welds when it is subjected to a tensile force trying to generate a pull in the welded area.

How to calculate Thickness of Plate given Tensile Stress in Transverse Fillet Weld?

The thickness of Plate given Tensile Stress in Transverse Fillet Weld is the actual thickness of the plate to be welded and as a rule, the leg length h is equal to the plate thickness is calculated using Thickness of Transverse Fillet Welded Plate = Load on Transverse Fillet Weld/(Length of Weld*Tensile Stress in Transverse Fillet Weld). To calculate Thickness of Plate given Tensile Stress in Transverse Fillet Weld, you need Load on Transverse Fillet Weld (P_t), Length of Weld (L) & Tensile Stress in Transverse Fillet Weld (σ_t). With our tool, you need to enter the respective value for Load on Transverse Fillet Weld, Length of Weld & Tensile Stress in Transverse Fillet Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search