Torque Transmitted by Keyed Shaft given Stress in Key Solution

STEP 0: Pre-Calculation Summary
Formula Used
Transmitted Torque by Keyed Shaft = Compressive Stress in Key*Diameter of Shaft using Key*Length of Key*Height of Key/4
Mt = σc*ds*l*h/4
This formula uses 5 Variables
Variables Used
Transmitted Torque by Keyed Shaft - (Measured in Newton Meter) - Transmitted Torque by Keyed Shaft is defined as the amount of torque or the rotating power transferred from a shaft using a key into it.
Compressive Stress in Key - (Measured in Pascal) - Compressive Stress in Key is the force per unit area of a key cross-section that is responsible for the deformation of the material such that the volume of the material reduces.
Diameter of Shaft using Key - (Measured in Meter) - Diameter of Shaft using Key is defined as the external surface diameter of a shaft (a rotating machine element) using a key into it.
Length of Key - (Measured in Meter) - The Length of Key is defined as the length of the key which is used to prevent rotation of a machine component or it is the major dimension of the key.
Height of Key - (Measured in Meter) - Height of Key is defined as the vertical length of the key that is used to transmit the torque produced and to restrict the relative movement between two rotating elements.
STEP 1: Convert Input(s) to Base Unit
Compressive Stress in Key: 128 Newton per Square Millimeter --> 128000000 Pascal (Check conversion here)
Diameter of Shaft using Key: 45 Millimeter --> 0.045 Meter (Check conversion here)
Length of Key: 35 Millimeter --> 0.035 Meter (Check conversion here)
Height of Key: 4.5 Millimeter --> 0.0045 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Mt = σc*ds*l*h/4 --> 128000000*0.045*0.035*0.0045/4
Evaluating ... ...
Mt = 226.8
STEP 3: Convert Result to Output's Unit
226.8 Newton Meter -->226800 Newton Millimeter (Check conversion here)
FINAL ANSWER
226800 Newton Millimeter <-- Transmitted Torque by Keyed Shaft
(Calculation completed in 00.004 seconds)

Credits

Created by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has created this Calculator and 1000+ more calculators!
Verified by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1900+ more calculators!

13 Design of Square and Flat Keys Calculators

Shaft Diameter given Compressive Stress in Key
Go Diameter of Shaft using Key = 4*Transmitted Torque by Keyed Shaft/(Compressive Stress in Key*Length of Key*Height of Key)
Length of Key given Compressive Stress in Key
Go Length of Key = 4*Transmitted Torque by Keyed Shaft/(Diameter of Shaft using Key*Compressive Stress in Key*Height of Key)
Height of Key given Compressive Stress in Key
Go Height of Key = 4*Transmitted Torque by Keyed Shaft/(Diameter of Shaft using Key*Length of Key*Compressive Stress in Key)
Compressive Stress in Key
Go Compressive Stress in Key = 4*Transmitted Torque by Keyed Shaft/(Diameter of Shaft using Key*Length of Key*Height of Key)
Torque Transmitted by Keyed Shaft given Stress in Key
Go Transmitted Torque by Keyed Shaft = Compressive Stress in Key*Diameter of Shaft using Key*Length of Key*Height of Key/4
Shear Stress in Key given Torque Transmitted
Go Shear Stress in Key = 2*Transmitted Torque by Keyed Shaft/(Width of Key*Length of Key*Diameter of Shaft using Key)
Width of Key given Shear Stress in Key
Go Width of Key = Force on Key/(Shear Stress in Key*Length of Key)
Shear Stress in given Force on Key
Go Shear Stress in Key = Force on Key/(Width of Key*Length of Key)
Length of Key given Shear Stress
Go Length of Key = Force on Key/(Width of Key*Shear Stress in Key)
Torque Transmitted by Keyed Shaft given Force on Keys
Go Transmitted Torque by Keyed Shaft = Force on Key*Diameter of Shaft using Key/2
Shaft Diameter given Force on Key
Go Diameter of Shaft using Key = 2*Transmitted Torque by Keyed Shaft/Force on Key
Force on Key
Go Force on Key = 2*Transmitted Torque by Keyed Shaft/Diameter of Shaft using Key
Compressive Stress in Square Key due to Transmitted Torque
Go Compressive Stress in Key = 2*Shear Stress in Key

Torque Transmitted by Keyed Shaft given Stress in Key Formula

Transmitted Torque by Keyed Shaft = Compressive Stress in Key*Diameter of Shaft using Key*Length of Key*Height of Key/4
Mt = σc*ds*l*h/4

Define Torque Transmission

A torque converter is a type of fluid coupling which transfers rotating power from a prime mover, like an internal combustion engine, to a rotating driven load. In a vehicle with an automatic transmission, the torque converter connects the power source to the load.

How to Calculate Torque Transmitted by Keyed Shaft given Stress in Key?

Torque Transmitted by Keyed Shaft given Stress in Key calculator uses Transmitted Torque by Keyed Shaft = Compressive Stress in Key*Diameter of Shaft using Key*Length of Key*Height of Key/4 to calculate the Transmitted Torque by Keyed Shaft, Torque Transmitted by Keyed Shaft given Stress in Key is defined as the amount of torque or actually the rotation power transmitted by the keyed shaft. Transmitted Torque by Keyed Shaft is denoted by Mt symbol.

How to calculate Torque Transmitted by Keyed Shaft given Stress in Key using this online calculator? To use this online calculator for Torque Transmitted by Keyed Shaft given Stress in Key, enter Compressive Stress in Key c), Diameter of Shaft using Key (ds), Length of Key (l) & Height of Key (h) and hit the calculate button. Here is how the Torque Transmitted by Keyed Shaft given Stress in Key calculation can be explained with given input values -> 2.3E+8 = 128000000*0.045*0.035*0.0045/4.

FAQ

What is Torque Transmitted by Keyed Shaft given Stress in Key?
Torque Transmitted by Keyed Shaft given Stress in Key is defined as the amount of torque or actually the rotation power transmitted by the keyed shaft and is represented as Mt = σc*ds*l*h/4 or Transmitted Torque by Keyed Shaft = Compressive Stress in Key*Diameter of Shaft using Key*Length of Key*Height of Key/4. Compressive Stress in Key is the force per unit area of a key cross-section that is responsible for the deformation of the material such that the volume of the material reduces, Diameter of Shaft using Key is defined as the external surface diameter of a shaft (a rotating machine element) using a key into it, The Length of Key is defined as the length of the key which is used to prevent rotation of a machine component or it is the major dimension of the key & Height of Key is defined as the vertical length of the key that is used to transmit the torque produced and to restrict the relative movement between two rotating elements.
How to calculate Torque Transmitted by Keyed Shaft given Stress in Key?
Torque Transmitted by Keyed Shaft given Stress in Key is defined as the amount of torque or actually the rotation power transmitted by the keyed shaft is calculated using Transmitted Torque by Keyed Shaft = Compressive Stress in Key*Diameter of Shaft using Key*Length of Key*Height of Key/4. To calculate Torque Transmitted by Keyed Shaft given Stress in Key, you need Compressive Stress in Key c), Diameter of Shaft using Key (ds), Length of Key (l) & Height of Key (h). With our tool, you need to enter the respective value for Compressive Stress in Key, Diameter of Shaft using Key, Length of Key & Height of Key and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Transmitted Torque by Keyed Shaft?
In this formula, Transmitted Torque by Keyed Shaft uses Compressive Stress in Key, Diameter of Shaft using Key, Length of Key & Height of Key. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Transmitted Torque by Keyed Shaft = Force on Key*Diameter of Shaft using Key/2
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!