Train Value of Compound Gear Train given Speed of Driven and Driver Gear Solution

STEP 0: Pre-Calculation Summary
Formula Used
Train Value = Speed of Last Driven Pulley/Speed of First Driver
Tv = Nn/Nd1
This formula uses 3 Variables
Variables Used
Train Value - Train value is the ratio of the speed of the driven or follower to the speed of the driver.
Speed of Last Driven Pulley - (Measured in Hertz) - Speed of last driven pulley is the number of turns of the object divided by time, specified as revolutions per minute (rpm), cycles per second (cps), radians per second (rad/s), etc.
Speed of First Driver - (Measured in Hertz) - Speed of first driver is the number of turns of the object divided by time, specified as revolutions per minute (rpm), cycles per second (cps), radians per second (rad/s), etc.
STEP 1: Convert Input(s) to Base Unit
Speed of Last Driven Pulley: 22 Revolution per Minute --> 0.366666666666667 Hertz (Check conversion here)
Speed of First Driver: 28 Revolution per Minute --> 0.466666666666667 Hertz (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Tv = Nn/Nd1 --> 0.366666666666667/0.466666666666667
Evaluating ... ...
Tv = 0.785714285714286
STEP 3: Convert Result to Output's Unit
0.785714285714286 --> No Conversion Required
FINAL ANSWER
0.785714285714286 0.785714 <-- Train Value
(Calculation completed in 00.004 seconds)

Credits

Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verified by Team Softusvista
Softusvista Office (Pune), India
Team Softusvista has verified this Calculator and 1100+ more calculators!

13 Gear Trains Calculators

Output Torque on Driven Member given Angular Speed of Driven and Driver
Go Output Torque or Load Torque on Driven Member = Input Torque on Driving Member*Angular Speed of Driving Member in RPM/Angular Speed of Driven Member in RPM
Output Torque or Resisting or Load Torque on Driven Member
Go Output Torque or Load Torque on Driven Member = -Input Torque on Driving Member*Angular Speed of Driving Member/Angular Speed of Driven member
Holding or Braking or Fixing Torque on Fixed Member
Go Total Torque = Input Torque on Driving Member*(Angular Speed of Driving Member in RPM/Angular Speed of Driven Member in RPM-1)
Braking or Holding Torque on Fixed Member given Input Torque
Go Total Torque = Input Torque on Driving Member*(Angular Speed of Driving Member/Angular Speed of Driven member-1)
Holding or Braking or Fixing Torque on Fixed Member given Input and Output Torque
Go Total Torque = -(Input Torque on Driving Member+Output Torque or Load Torque on Driven Member)
Speed Ratio of Compound Gear Train
Go Velocity Ratio = Product of Number of Teeth on Driven/Product of Number of Teeth on Drivers
Train Value of Compound Gear Train given product of Teeth on Driven and Driver Gear
Go Train Value = Product of Number of Teeth on Drivers/Product of Number of Teeth on Driven
Velocity Ratio of Compound Belt Drive given Product of Diameter of Driven
Go Velocity Ratio = Product of Diameters of Drivers/Product of Diameters of Drivens
Velocity Ratio of Compound Belt Drive
Go Velocity Ratio = Speed of Last Driven Pulley/Speed of First Driver
Train Value of Compound Gear Train given Speed of Driven and Driver Gear
Go Train Value = Speed of Last Driven Pulley/Speed of First Driver
Velocity Ratio
Go Velocity Ratio = No. of Teeth on Driven/No. of Teeth on Driver
Train Value given Number of Teeth
Go Train Value = No. of Teeth on Driver/No. of Teeth on Driven
Train Value given Speed of Follower and Driver
Go Train Value = Speed of Follower/Speed of Driver

Train Value of Compound Gear Train given Speed of Driven and Driver Gear Formula

Train Value = Speed of Last Driven Pulley/Speed of First Driver
Tv = Nn/Nd1

What is Train value?

The train value is reciprocal of the speed ratio. Speed ratio (or velocity ratio) of the gear train is the ratio of the speed of the driver to the speed of the driven or follower(or) the ratio of speeds of any pair of gears in the mesh is the inverse of their number of teeth.

How to Calculate Train Value of Compound Gear Train given Speed of Driven and Driver Gear?

Train Value of Compound Gear Train given Speed of Driven and Driver Gear calculator uses Train Value = Speed of Last Driven Pulley/Speed of First Driver to calculate the Train Value, Train value of Compound Gear Train given Speed of Driven and Driver Gear is defined as reciprocal of speed ratio. Train Value is denoted by Tv symbol.

How to calculate Train Value of Compound Gear Train given Speed of Driven and Driver Gear using this online calculator? To use this online calculator for Train Value of Compound Gear Train given Speed of Driven and Driver Gear, enter Speed of Last Driven Pulley (Nn) & Speed of First Driver (Nd1) and hit the calculate button. Here is how the Train Value of Compound Gear Train given Speed of Driven and Driver Gear calculation can be explained with given input values -> 0.785714 = 0.366666666666667/0.466666666666667.

FAQ

What is Train Value of Compound Gear Train given Speed of Driven and Driver Gear?
Train value of Compound Gear Train given Speed of Driven and Driver Gear is defined as reciprocal of speed ratio and is represented as Tv = Nn/Nd1 or Train Value = Speed of Last Driven Pulley/Speed of First Driver. Speed of last driven pulley is the number of turns of the object divided by time, specified as revolutions per minute (rpm), cycles per second (cps), radians per second (rad/s), etc & Speed of first driver is the number of turns of the object divided by time, specified as revolutions per minute (rpm), cycles per second (cps), radians per second (rad/s), etc.
How to calculate Train Value of Compound Gear Train given Speed of Driven and Driver Gear?
Train value of Compound Gear Train given Speed of Driven and Driver Gear is defined as reciprocal of speed ratio is calculated using Train Value = Speed of Last Driven Pulley/Speed of First Driver. To calculate Train Value of Compound Gear Train given Speed of Driven and Driver Gear, you need Speed of Last Driven Pulley (Nn) & Speed of First Driver (Nd1). With our tool, you need to enter the respective value for Speed of Last Driven Pulley & Speed of First Driver and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Train Value?
In this formula, Train Value uses Speed of Last Driven Pulley & Speed of First Driver. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Train Value = Speed of Follower/Speed of Driver
  • Train Value = No. of Teeth on Driver/No. of Teeth on Driven
  • Train Value = Product of Number of Teeth on Drivers/Product of Number of Teeth on Driven
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!