Upper Trigger Point Voltage in Triangle to Square Converter Solution

STEP 0: Pre-Calculation Summary
Formula Used
Upper Trigger Voltage 1 = (Supply Voltage 1-1)*(Resistance 3 FG/Resistance 4 FG)
Vup-trg1 = (Vcc-1-1)*(R3/R4)
This formula uses 4 Variables
Variables Used
Upper Trigger Voltage 1 - (Measured in Volt) - Upper Trigger Voltage 1 is specific voltage level on the input that triggers a change in the circuit's output state.
Supply Voltage 1 - (Measured in Volt) - Supply Voltage 1 is the value of supply voltage provided to the op-amp.
Resistance 3 FG - (Measured in Ohm) - Resistance 3 FG is the value of resistor 3 of the oscillator.
Resistance 4 FG - (Measured in Ohm) - Resistance 4 FG is the value of resistor 4 of the oscillator.
STEP 1: Convert Input(s) to Base Unit
Supply Voltage 1: 5.5 Volt --> 5.5 Volt No Conversion Required
Resistance 3 FG: 35 Ohm --> 35 Ohm No Conversion Required
Resistance 4 FG: 15 Ohm --> 15 Ohm No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Vup-trg1 = (Vcc-1-1)*(R3/R4) --> (5.5-1)*(35/15)
Evaluating ... ...
Vup-trg1 = 10.5
STEP 3: Convert Result to Output's Unit
10.5 Volt --> No Conversion Required
FINAL ANSWER
10.5 Volt <-- Upper Trigger Voltage 1
(Calculation completed in 00.004 seconds)

Credits

Created by Nikita Suryawanshi
Vellore Institute of Technology (VIT), Vellore
Nikita Suryawanshi has created this Calculator and 100+ more calculators!
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

7 Signal Converter Calculators

Output Voltage of Triangle to Sine Converter with D2
Go Output voltage FG = Input Voltage*((Resistance 2 FG*Resistance 4 FG)/((Resistance 1 FG*Resistance 2 FG)+(Resistance 1 FG*Resistance 4 FG)+(Resistance 2 FG*Resistance 4 FG)))
Output Voltage of Triangle to Sine Converter with D1
Go Output Voltage = Input Voltage*((Resistance 2 FG*Resistance 3 FG)/((Resistance 1 FG*Resistance 2 FG)+(Resistance 1 FG*Resistance 3 FG)+(Resistance 2 FG*Resistance 3 FG)))
Charging or Discharging Time in Triangle to Square Converter
Go Charging and Discharging Time 1 = Capacitance 1*(Upper Trigger Voltage-Lower Trigger Voltage)/Current 2
Output Voltage of Triangle to Sine Converter without D1 and D2
Go Output voltage FG 1 = Input Voltage*Resistance 2 FG/(Resistance 1 FG+Resistance 2 FG)
Upper Trigger Point Voltage in Triangle to Square Converter
Go Upper Trigger Voltage 1 = (Supply Voltage 1-1)*(Resistance 3 FG/Resistance 4 FG)
Lower Trigger Point Voltage in Triangle to Square Converter
Go Lower Trigger Voltage = (1-Supply Voltage)*(Resistance 3 FG/Resistance 4 FG)
Time Period of Wave in Triangle to Square Converter
Go Time period = 2*Charging and Discharging Time

Upper Trigger Point Voltage in Triangle to Square Converter Formula

Upper Trigger Voltage 1 = (Supply Voltage 1-1)*(Resistance 3 FG/Resistance 4 FG)
Vup-trg1 = (Vcc-1-1)*(R3/R4)

How does the state change at Upper Trigger Point Voltage in Triangle to Square Converter?

At the Upper Trigger Point Voltage in a Triangle to Square Converter, the state of the converter changes from a high-impedance state to a low-impedance state. This allows the input voltage to be isolated from the output voltage, and ensures that the output voltage remains stable and consistent.

How to Calculate Upper Trigger Point Voltage in Triangle to Square Converter?

Upper Trigger Point Voltage in Triangle to Square Converter calculator uses Upper Trigger Voltage 1 = (Supply Voltage 1-1)*(Resistance 3 FG/Resistance 4 FG) to calculate the Upper Trigger Voltage 1, The Upper Trigger Point Voltage in Triangle to Square Converter formula is the amplitude of the upper triggering point of the voltage. Upper Trigger Voltage 1 is denoted by Vup-trg1 symbol.

How to calculate Upper Trigger Point Voltage in Triangle to Square Converter using this online calculator? To use this online calculator for Upper Trigger Point Voltage in Triangle to Square Converter, enter Supply Voltage 1 (Vcc-1), Resistance 3 FG (R3) & Resistance 4 FG (R4) and hit the calculate button. Here is how the Upper Trigger Point Voltage in Triangle to Square Converter calculation can be explained with given input values -> 10.5 = (5.5-1)*(35/15).

FAQ

What is Upper Trigger Point Voltage in Triangle to Square Converter?
The Upper Trigger Point Voltage in Triangle to Square Converter formula is the amplitude of the upper triggering point of the voltage and is represented as Vup-trg1 = (Vcc-1-1)*(R3/R4) or Upper Trigger Voltage 1 = (Supply Voltage 1-1)*(Resistance 3 FG/Resistance 4 FG). Supply Voltage 1 is the value of supply voltage provided to the op-amp, Resistance 3 FG is the value of resistor 3 of the oscillator & Resistance 4 FG is the value of resistor 4 of the oscillator.
How to calculate Upper Trigger Point Voltage in Triangle to Square Converter?
The Upper Trigger Point Voltage in Triangle to Square Converter formula is the amplitude of the upper triggering point of the voltage is calculated using Upper Trigger Voltage 1 = (Supply Voltage 1-1)*(Resistance 3 FG/Resistance 4 FG). To calculate Upper Trigger Point Voltage in Triangle to Square Converter, you need Supply Voltage 1 (Vcc-1), Resistance 3 FG (R3) & Resistance 4 FG (R4). With our tool, you need to enter the respective value for Supply Voltage 1, Resistance 3 FG & Resistance 4 FG and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!