Output Voltage of Inverted R-2R Linear Converter Calculator

✖Full Scale Voltage refers to the maximum voltage level that a device, circuit, or system can handle or produce without distortion or saturation.ⓘ Full Scale Voltage [V_fs]			+10% -10%
✖Switch Position 4 refers to the setting or configuration of a switch within the converter circuit at position 4.ⓘ Switch Position 4 [S₄]			+10% -10%
✖Switch Position 3 refers to the setting or configuration of a switch within the converter circuit at position 3.ⓘ Switch Position 3 [S₃]			+10% -10%
✖Switch Position 2 refers to the setting or configuration of a switch within the converter circuit position of switch 2.ⓘ Switch Position 2 [S₂]			+10% -10%
✖Switch Position 1 refers to the setting or configuration of a switch within the converter circuit position of switch 1.ⓘ Switch Position 1 [S₁]			+10% -10%

✖Output Voltage is electrical voltage produced by the device after it has processed an input signal.ⓘ Output Voltage of Inverted R-2R Linear Converter [V_out-fg]

⎘ Copy

👎

Formula

✖

Output Voltage of Inverted R-2R Linear Converter

Formula

`"V"_{"out-fg"} = "V"_{"fs"}*(("S"_{"4"}/2)+("S"_{"3"}/4)+("S"_{"2"}/8)+("S"_{"1"}/16))`

Example

`"44.39062V"="7.5V"*(("6"/2)+("9"/4)+("1.3"/8)+("8.1"/16))`

Calculator

LaTeX

Reset

👍

Download Electronics and Instrumentation Formula PDF

Output Voltage of Inverted R-2R Linear Converter Solution

STEP 0: Pre-Calculation Summary

Formula Used

Output Voltage = Full Scale Voltage*((Switch Position 4/2)+(Switch Position 3/4)+(Switch Position 2/8)+(Switch Position 1/16))
V_out-fg = V_fs*((S₄/2)+(S₃/4)+(S₂/8)+(S₁/16))
This formula uses 6 Variables

Variables Used

Output Voltage - (Measured in Volt) - Output Voltage is electrical voltage produced by the device after it has processed an input signal.
Full Scale Voltage - (Measured in Volt) - Full Scale Voltage refers to the maximum voltage level that a device, circuit, or system can handle or produce without distortion or saturation.
Switch Position 4 - Switch Position 4 refers to the setting or configuration of a switch within the converter circuit at position 4.
Switch Position 3 - Switch Position 3 refers to the setting or configuration of a switch within the converter circuit at position 3.
Switch Position 2 - Switch Position 2 refers to the setting or configuration of a switch within the converter circuit position of switch 2.
Switch Position 1 - Switch Position 1 refers to the setting or configuration of a switch within the converter circuit position of switch 1.

STEP 1: Convert Input(s) to Base Unit

Full Scale Voltage: 7.5 Volt --> 7.5 Volt No Conversion Required
Switch Position 4: 6 --> No Conversion Required
Switch Position 3: 9 --> No Conversion Required
Switch Position 2: 1.3 --> No Conversion Required
Switch Position 1: 8.1 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_out-fg = V_fs*((S₄/2)+(S₃/4)+(S₂/8)+(S₁/16)) --> 7.5*((6/2)+(9/4)+(1.3/8)+(8.1/16))

Evaluating ... ...

V_out-fg = 44.390625

STEP 3: Convert Result to Output's Unit

44.390625 Volt --> No Conversion Required

FINAL ANSWER

44.390625 ≈ 44.39062 Volt <-- Output Voltage

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics and Instrumentation » Signal Generator & Analyzer » Signal Converter » Digital to Analog » Output Voltage of Inverted R-2R Linear Converter

Credits

Created by Nikita Suryawanshi

Vellore Institute of Technology (VIT), Vellore

Nikita Suryawanshi has created this Calculator and 100+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< 3 Digital to Analog Calculators

Output Voltage of R-2R Linear Converter

Go Output Voltage = (Feedback Resistance*Full Scale Voltage/Resistance)*((Least Significant Bit/16)+(3rd Bit/8)+(2nd Bit/4)+(Most Significant Bit/2))

Output Voltage of Binary Weighted Converter

Go Weighted Binary Output Voltage = -Reference Voltage*((Most Significant Bit/16)+(2nd Bit/8)+(3rd Bit/4)+(Least Significant Bit/2))

Output Voltage of Inverted R-2R Linear Converter

Go Output Voltage = Full Scale Voltage*((Switch Position 4/2)+(Switch Position 3/4)+(Switch Position 2/8)+(Switch Position 1/16))

Output Voltage of Inverted R-2R Linear Converter Formula

Output Voltage = Full Scale Voltage*((Switch Position 4/2)+(Switch Position 3/4)+(Switch Position 2/8)+(Switch Position 1/16))
V_out-fg = V_fs*((S₄/2)+(S₃/4)+(S₂/8)+(S₁/16))

Why is an inverted R-2R ladder network DAC better than an R-2R ladder DAC?

In inverted R-2R ladder DAC, node voltages remain constant with changing input binary words. This avoids any slowdown effects by stray capacitances.

How to Calculate Output Voltage of Inverted R-2R Linear Converter?

Output Voltage of Inverted R-2R Linear Converter calculator uses Output Voltage = Full Scale Voltage*((Switch Position 4/2)+(Switch Position 3/4)+(Switch Position 2/8)+(Switch Position 1/16)) to calculate the Output Voltage, The Output Voltage of Inverted R-2R Linear Converter formula is the final effective output voltage of the inverted R-2R Linear type AC. Output Voltage is denoted by V_out-fg symbol.

How to calculate Output Voltage of Inverted R-2R Linear Converter using this online calculator? To use this online calculator for Output Voltage of Inverted R-2R Linear Converter, enter Full Scale Voltage (V_fs), Switch Position 4 (S₄), Switch Position 3 (S₃), Switch Position 2 (S₂) & Switch Position 1 (S₁) and hit the calculate button. Here is how the Output Voltage of Inverted R-2R Linear Converter calculation can be explained with given input values -> 44.39062 = 7.5*((6/2)+(9/4)+(1.3/8)+(8.1/16)).

FAQ

What is Output Voltage of Inverted R-2R Linear Converter?

The Output Voltage of Inverted R-2R Linear Converter formula is the final effective output voltage of the inverted R-2R Linear type AC and is represented as V_out-fg = V_fs*((S₄/2)+(S₃/4)+(S₂/8)+(S₁/16)) or Output Voltage = Full Scale Voltage*((Switch Position 4/2)+(Switch Position 3/4)+(Switch Position 2/8)+(Switch Position 1/16)). Full Scale Voltage refers to the maximum voltage level that a device, circuit, or system can handle or produce without distortion or saturation, Switch Position 4 refers to the setting or configuration of a switch within the converter circuit at position 4, Switch Position 3 refers to the setting or configuration of a switch within the converter circuit at position 3, Switch Position 2 refers to the setting or configuration of a switch within the converter circuit position of switch 2 & Switch Position 1 refers to the setting or configuration of a switch within the converter circuit position of switch 1.

How to calculate Output Voltage of Inverted R-2R Linear Converter?

The Output Voltage of Inverted R-2R Linear Converter formula is the final effective output voltage of the inverted R-2R Linear type AC is calculated using Output Voltage = Full Scale Voltage*((Switch Position 4/2)+(Switch Position 3/4)+(Switch Position 2/8)+(Switch Position 1/16)). To calculate Output Voltage of Inverted R-2R Linear Converter, you need Full Scale Voltage (V_fs), Switch Position 4 (S₄), Switch Position 3 (S₃), Switch Position 2 (S₂) & Switch Position 1 (S₁). With our tool, you need to enter the respective value for Full Scale Voltage, Switch Position 4, Switch Position 3, Switch Position 2 & Switch Position 1 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Output Voltage?

In this formula, Output Voltage uses Full Scale Voltage, Switch Position 4, Switch Position 3, Switch Position 2 & Switch Position 1. We can use 1 other way(s) to calculate the same, which is/are as follows -

Output Voltage = (Feedback Resistance*Full Scale Voltage/Resistance)*((Least Significant Bit/16)+(3rd Bit/8)+(2nd Bit/4)+(Most Significant Bit/2))

Home

FREE PDFs

🔍 Search