Van't Hoff Osmotic Pressure for Electrolyte Solution

STEP 0: Pre-Calculation Summary
Formula Used
Osmotic Pressure = Van't Hoff Factor*Molar Concentration of Solute*Universal Gas Constant*Temperature
π = i*c*R*T
This formula uses 5 Variables
Variables Used
Osmotic Pressure - (Measured in Pascal) - The Osmotic Pressure is the minimum pressure which needs to be applied to a solution to prevent the inward flow of its pure solvent across a semipermeable membrane.
Van't Hoff Factor - A Van't Hoff Factor is the ratio of observed colligative property to theoretical colligative property.
Molar Concentration of Solute - (Measured in Mole per Liter) - The Molar Concentration of Solute is a measure of the concentration of a chemical species, in particular of a solute in a solution, in terms of amount of substance per unit volume of solution.
Universal Gas Constant - Universal Gas Constant is a physical constant that appears in an equation defining the behavior of a gas under theoretically ideal conditions. Its unit is joule*kelvin−1*mole−1.
Temperature - (Measured in Kelvin) - Temperature is the degree or intensity of heat present in a substance or object.
STEP 1: Convert Input(s) to Base Unit
Van't Hoff Factor: 1.008 --> No Conversion Required
Molar Concentration of Solute: 0.001 Mole per Liter --> 0.001 Mole per Liter No Conversion Required
Universal Gas Constant: 8.314 --> No Conversion Required
Temperature: 298 Kelvin --> 298 Kelvin No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
π = i*c*R*T --> 1.008*0.001*8.314*298
Evaluating ... ...
π = 2.497392576
STEP 3: Convert Result to Output's Unit
2.497392576 Pascal --> No Conversion Required
FINAL ANSWER
2.497392576 2.497393 Pascal <-- Osmotic Pressure
(Calculation completed in 00.004 seconds)

Credits

Created by Prerana Bakli
University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA
Prerana Bakli has created this Calculator and 800+ more calculators!
Verified by Akshada Kulkarni
National Institute of Information Technology (NIIT), Neemrana
Akshada Kulkarni has verified this Calculator and 900+ more calculators!

19 Osmotic Pressure Calculators

Osmotic Pressure given Volume and Concentration of Two Substances
Go Osmotic Pressure = (((Concentration of Particle 1*Volume of Particle 1)+(Concentration of Particle 2*Volume of Particle 2))*([R]*Temperature))/(Volume of Particle 1+Volume of Particle 2)
Van't Hoff Osmotic Pressure for Mixture of Two Solutions
Go Osmotic Pressure = ((Van't Hoff Factor of Particle 1*Concentration of Particle 1)+(Van't Hoff Factor of Particle 2*Concentration of Particle 2))*[R]*Temperature
Osmotic Pressure given Vapour Pressure
Go Osmotic Pressure = ((Vapour Pressure of Pure Solvent-Vapour Pressure of Solvent in Solution)*[R]*Temperature)/(Molar Volume*Vapour Pressure of Pure Solvent)
Osmotic Pressure given Volume and Osmotic Pressure of Two Substances
Go Osmotic Pressure = ((Osmotic Pressure of Particle 1*Volume of Particle 1)+(Osmotic Pressure of Particle 2*Volume of Particle 2))/([R]*Temperature)
Osmotic Pressure given Depression in Freezing Point
Go Osmotic Pressure = (Molar Enthalpy of Fusion*Depression in Freezing Point*Temperature)/(Molar Volume*(Solvent Freezing Point^2))
Van't Hoff Osmotic Pressure for Electrolyte
Go Osmotic Pressure = Van't Hoff Factor*Molar Concentration of Solute*Universal Gas Constant*Temperature
Osmotic Pressure given Concentration of Two Substances
Go Osmotic Pressure = (Concentration of Particle 1+Concentration of Particle 2)*[R]*Temperature
Relative Lowering of Vapour Pressure given Osmotic Pressure
Go Relative Lowering of Vapour Pressure = (Osmotic Pressure*Molar Volume)/([R]*Temperature)
Osmotic Pressure given Relative Lowering of Vapour Pressure
Go Osmotic Pressure = (Relative Lowering of Vapour Pressure*[R]*Temperature)/Molar Volume
Van't Hoff Factor given Osmotic Pressure
Go Van't Hoff Factor = Osmotic Pressure/(Molar Concentration of Solute*[R]*Temperature)
Temperature of Gas given Osmotic Pressure
Go Temperature = (Osmotic Pressure*Volume of Solution)/(Number of Moles of Solute*[R])
Moles of Solute given Osmotic Pressure
Go Number of Moles of Solute = (Osmotic Pressure*Volume of Solution)/([R]*Temperature)
Osmotic Pressure using Number of Moles and Volume of Solution
Go Osmotic Pressure = (Number of Moles of Solute*[R]*Temperature)/Volume of Solution
Volume of Solution given Osmotic Pressure
Go Volume of Solution = (Number of Moles of Solute*[R]*Temperature)/Osmotic Pressure
Total Concentration of Particles using Osmotic Pressure
Go Molar Concentration of Solute = Osmotic Pressure/([R]*Temperature)
Osmotic Pressure for Non Electrolyte
Go Osmotic Pressure = Molar Concentration of Solute*[R]*Temperature
Density of Solution given Osmotic Pressure
Go Density of Solution = Osmotic Pressure/([g]*Equilibrium Height)
Equilibrium Height given Osmotic Pressure
Go Equilibrium Height = Osmotic Pressure/([g]*Density of Solution)
Osmotic Pressure given Density of Solution
Go Osmotic Pressure = Density of Solution*[g]*Equilibrium Height

22 Important Formulas of Colligative Properties Calculators

Van't Hoff Osmotic Pressure for Mixture of Two Solutions
Go Osmotic Pressure = ((Van't Hoff Factor of Particle 1*Concentration of Particle 1)+(Van't Hoff Factor of Particle 2*Concentration of Particle 2))*[R]*Temperature
Osmotic Pressure given Vapour Pressure
Go Osmotic Pressure = ((Vapour Pressure of Pure Solvent-Vapour Pressure of Solvent in Solution)*[R]*Temperature)/(Molar Volume*Vapour Pressure of Pure Solvent)
Osmotic Pressure given Depression in Freezing Point
Go Osmotic Pressure = (Molar Enthalpy of Fusion*Depression in Freezing Point*Temperature)/(Molar Volume*(Solvent Freezing Point^2))
Relative Lowering of Vapour Pressure
Go Relative Lowering of Vapour Pressure = (Vapour Pressure of Pure Solvent-Vapour Pressure of Solvent in Solution)/Vapour Pressure of Pure Solvent
Van't Hoff Osmotic Pressure for Electrolyte
Go Osmotic Pressure = Van't Hoff Factor*Molar Concentration of Solute*Universal Gas Constant*Temperature
Ebullioscopic Constant using Latent Heat of Vaporization
Go Ebullioscopic Constant of Solvent = ([R]*Solvent BP given Latent Heat of Vaporization^2)/(1000*Latent Heat of Vaporization)
Osmotic Pressure given Concentration of Two Substances
Go Osmotic Pressure = (Concentration of Particle 1+Concentration of Particle 2)*[R]*Temperature
Ostwald-Walker Dynamic Method for Relative Lowering of Vapour Pressure
Go Relative Lowering of Vapour Pressure = Loss of Mass in Bulb Set B/(Loss of Mass in bulb set A+Loss of Mass in Bulb Set B)
Relative Lowering of Vapour Pressure given Number of Moles for Concentrated Solution
Go Relative Lowering of Vapour Pressure = Number of Moles of Solute/(Number of Moles of Solute+Number of Moles of Solvent)
Osmotic Pressure given Relative Lowering of Vapour Pressure
Go Osmotic Pressure = (Relative Lowering of Vapour Pressure*[R]*Temperature)/Molar Volume
Cryoscopic Constant given Latent Heat of Fusion
Go Cryoscopic Constant = ([R]*Solvent Freezing Point for Cryoscopic Constant^2)/(1000*Latent Heat of Fusion)
Van't Hoff Relative Lowering of Vapour Pressure given Molecular Mass and Molality
Go Colligative Pressure given Van't Hoff factor = (Van't Hoff Factor*Molality*Molecular Mass Solvent)/1000
Ebullioscopic Constant given Elevation in Boiling Point
Go Ebullioscopic Constant of Solvent = Boiling Point Elevation/(Van't Hoff Factor*Molality)
Van't Hoff Equation for Elevation in Boiling Point of Electrolyte
Go Boiling Point Elevation = Van't Hoff Factor*Ebullioscopic Constant of Solvent*Molality
Cryoscopic Constant given Depression in Freezing Point
Go Cryoscopic Constant = Depression in Freezing Point/(Van't Hoff Factor*Molality)
Van't Hoff equation for Depression in Freezing Point of electrolyte
Go Depression in Freezing Point = Van't Hoff Factor*Cryoscopic Constant*Molality
Total Concentration of Particles using Osmotic Pressure
Go Molar Concentration of Solute = Osmotic Pressure/([R]*Temperature)
Osmotic Pressure for Non Electrolyte
Go Osmotic Pressure = Molar Concentration of Solute*[R]*Temperature
Osmotic Pressure given Density of Solution
Go Osmotic Pressure = Density of Solution*[g]*Equilibrium Height
Relative Lowering of Vapour Pressure given Number of Moles for Dilute Solution
Go Relative Lowering of Vapour Pressure = Number of Moles of Solute/Number of Moles of Solvent
Boiling Point Elevation
Go Boiling Point Elevation = Molal Boiling Point Elevation Constant*Molality
Freezing Point Depression
Go Depression in Freezing Point = Cryoscopic Constant*Molality

Van't Hoff Osmotic Pressure for Electrolyte Formula

Osmotic Pressure = Van't Hoff Factor*Molar Concentration of Solute*Universal Gas Constant*Temperature
π = i*c*R*T

How to calculate the Osmotic Pressure for an Electrolyte ( i not equal to 1)?

The Van't Hoff formula for osmotic pressure formula is π = icRT
π = osmotic pressure
i = dimensionless van 't Hoff index
c = molar concentration of solute
R = the ideal gas constant
T = temperature in kelvin

How to Calculate Van't Hoff Osmotic Pressure for Electrolyte?

Van't Hoff Osmotic Pressure for Electrolyte calculator uses Osmotic Pressure = Van't Hoff Factor*Molar Concentration of Solute*Universal Gas Constant*Temperature to calculate the Osmotic Pressure, The Van't Hoff Osmotic Pressure for Electrolyte ( i not equal to 1) is defined as the pressure applied to the solution side to stop fluid movement across a semipermeable membrane. Osmotic Pressure is denoted by π symbol.

How to calculate Van't Hoff Osmotic Pressure for Electrolyte using this online calculator? To use this online calculator for Van't Hoff Osmotic Pressure for Electrolyte, enter Van't Hoff Factor (i), Molar Concentration of Solute (c), Universal Gas Constant (R) & Temperature (T) and hit the calculate button. Here is how the Van't Hoff Osmotic Pressure for Electrolyte calculation can be explained with given input values -> 2.497393 = 1.008*1*8.314*298.

FAQ

What is Van't Hoff Osmotic Pressure for Electrolyte?
The Van't Hoff Osmotic Pressure for Electrolyte ( i not equal to 1) is defined as the pressure applied to the solution side to stop fluid movement across a semipermeable membrane and is represented as π = i*c*R*T or Osmotic Pressure = Van't Hoff Factor*Molar Concentration of Solute*Universal Gas Constant*Temperature. A Van't Hoff Factor is the ratio of observed colligative property to theoretical colligative property, The Molar Concentration of Solute is a measure of the concentration of a chemical species, in particular of a solute in a solution, in terms of amount of substance per unit volume of solution, Universal Gas Constant is a physical constant that appears in an equation defining the behavior of a gas under theoretically ideal conditions. Its unit is joule*kelvin−1*mole−1 & Temperature is the degree or intensity of heat present in a substance or object.
How to calculate Van't Hoff Osmotic Pressure for Electrolyte?
The Van't Hoff Osmotic Pressure for Electrolyte ( i not equal to 1) is defined as the pressure applied to the solution side to stop fluid movement across a semipermeable membrane is calculated using Osmotic Pressure = Van't Hoff Factor*Molar Concentration of Solute*Universal Gas Constant*Temperature. To calculate Van't Hoff Osmotic Pressure for Electrolyte, you need Van't Hoff Factor (i), Molar Concentration of Solute (c), Universal Gas Constant (R) & Temperature (T). With our tool, you need to enter the respective value for Van't Hoff Factor, Molar Concentration of Solute, Universal Gas Constant & Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Osmotic Pressure?
In this formula, Osmotic Pressure uses Van't Hoff Factor, Molar Concentration of Solute, Universal Gas Constant & Temperature. We can use 17 other way(s) to calculate the same, which is/are as follows -
  • Osmotic Pressure = ((Osmotic Pressure of Particle 1*Volume of Particle 1)+(Osmotic Pressure of Particle 2*Volume of Particle 2))/([R]*Temperature)
  • Osmotic Pressure = (Number of Moles of Solute*[R]*Temperature)/Volume of Solution
  • Osmotic Pressure = (((Concentration of Particle 1*Volume of Particle 1)+(Concentration of Particle 2*Volume of Particle 2))*([R]*Temperature))/(Volume of Particle 1+Volume of Particle 2)
  • Osmotic Pressure = (Concentration of Particle 1+Concentration of Particle 2)*[R]*Temperature
  • Osmotic Pressure = Density of Solution*[g]*Equilibrium Height
  • Osmotic Pressure = ((Vapour Pressure of Pure Solvent-Vapour Pressure of Solvent in Solution)*[R]*Temperature)/(Molar Volume*Vapour Pressure of Pure Solvent)
  • Osmotic Pressure = (Molar Enthalpy of Fusion*Depression in Freezing Point*Temperature)/(Molar Volume*(Solvent Freezing Point^2))
  • Osmotic Pressure = (Relative Lowering of Vapour Pressure*[R]*Temperature)/Molar Volume
  • Osmotic Pressure = ((Van't Hoff Factor of Particle 1*Concentration of Particle 1)+(Van't Hoff Factor of Particle 2*Concentration of Particle 2))*[R]*Temperature
  • Osmotic Pressure = Molar Concentration of Solute*[R]*Temperature
  • Osmotic Pressure = Molar Concentration of Solute*[R]*Temperature
  • Osmotic Pressure = (Concentration of Particle 1+Concentration of Particle 2)*[R]*Temperature
  • Osmotic Pressure = Density of Solution*[g]*Equilibrium Height
  • Osmotic Pressure = (Molar Enthalpy of Fusion*Depression in Freezing Point*Temperature)/(Molar Volume*(Solvent Freezing Point^2))
  • Osmotic Pressure = (Relative Lowering of Vapour Pressure*[R]*Temperature)/Molar Volume
  • Osmotic Pressure = ((Vapour Pressure of Pure Solvent-Vapour Pressure of Solvent in Solution)*[R]*Temperature)/(Molar Volume*Vapour Pressure of Pure Solvent)
  • Osmotic Pressure = ((Van't Hoff Factor of Particle 1*Concentration of Particle 1)+(Van't Hoff Factor of Particle 2*Concentration of Particle 2))*[R]*Temperature
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!