Velocity at Inlet when Work Done at Vane Angle is 90 and Velocity is Zero Calculator

✖Work done by/on a system is energy transferred by/to the system to/from its surroundings.ⓘ Work Done [w]			+10% -10%
✖Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.ⓘ Specific Gravity of Fluid [G]			+10% -10%
✖Weight of Fluid is the weight of fluid in Newtons or Kilo newton.ⓘ Weight of Fluid [w_f]			+10% -10%
✖Initial Velocity is the velocity at which motion starts.ⓘ Initial Velocity [u]			+10% -10%

✖The Final Velocity is the speed of a moving body after it has reached its maximum acceleration.ⓘ Velocity at Inlet when Work Done at Vane Angle is 90 and Velocity is Zero [v_f]

⎘ Copy

👎

Formula

✖

Velocity at Inlet when Work Done at Vane Angle is 90 and Velocity is Zero

Formula

`"v"_{"f"} = ("w"*"G")/("w"_{"f"}*"u")`

Example

`"90.15257m/s"= ("3.9KJ"*"10")/("12.36N"*"35m/s")`

Calculator

LaTeX

Reset

👍

Download Torque Exerted on a Wheel with Radial Curved Vanes Formulas PDF

Velocity at Inlet when Work Done at Vane Angle is 90 and Velocity is Zero Solution

STEP 0: Pre-Calculation Summary

Formula Used

Final Velocity = (Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Initial Velocity)
v_f = (w*G)/(w_f*u)
This formula uses 5 Variables

Variables Used

Final Velocity - (Measured in Meter per Second) - The Final Velocity is the speed of a moving body after it has reached its maximum acceleration.
Work Done - (Measured in Joule) - Work done by/on a system is energy transferred by/to the system to/from its surroundings.
Specific Gravity of Fluid - Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.
Weight of Fluid - (Measured in Newton) - Weight of Fluid is the weight of fluid in Newtons or Kilo newton.
Initial Velocity - (Measured in Meter per Second) - Initial Velocity is the velocity at which motion starts.

STEP 1: Convert Input(s) to Base Unit

Work Done: 3.9 Kilojoule --> 3900 Joule (Check conversion here)
Specific Gravity of Fluid: 10 --> No Conversion Required
Weight of Fluid: 12.36 Newton --> 12.36 Newton No Conversion Required
Initial Velocity: 35 Meter per Second --> 35 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

v_f = (w*G)/(w_f*u) --> (3900*10)/(12.36*35)

Evaluating ... ...

v_f = 90.1525658807212

STEP 3: Convert Result to Output's Unit

90.1525658807212 Meter per Second --> No Conversion Required

FINAL ANSWER

90.1525658807212 ≈ 90.15257 Meter per Second <-- Final Velocity

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Fundamentals of Fluid Flow » Torque Exerted on a Wheel with Radial Curved Vanes » Velocity at Inlet » Velocity at Inlet when Work Done at Vane Angle is 90 and Velocity is Zero

Credits

Created by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< 3 Velocity at Inlet Calculators

Velocity at Inlet given Work Done on Wheel

Go Final Velocity = (((Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Angular Velocity))-Velocity of Jet*Radius of Outlet)/Radius of wheel

Velocity at Inlet given Torque by Fluid

Go Final Velocity = (((Torque Exerted on Wheel*Specific Gravity of Fluid)/Weight of Fluid)+(Velocity of Jet*Radius of wheel))/Radius of Outlet

Velocity at Inlet when Work Done at Vane Angle is 90 and Velocity is Zero

Go Final Velocity = (Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Initial Velocity)

Velocity at Inlet when Work Done at Vane Angle is 90 and Velocity is Zero Formula

Final Velocity = (Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Initial Velocity)
v_f = (w*G)/(w_f*u)

What is meant by specific gravity?

Specific gravity is defined as the ratio of the density of a substance to the density of some substance (such as pure water).

How to Calculate Velocity at Inlet when Work Done at Vane Angle is 90 and Velocity is Zero?

Velocity at Inlet when Work Done at Vane Angle is 90 and Velocity is Zero calculator uses Final Velocity = (Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Initial Velocity) to calculate the Final Velocity, The Velocity at inlet when work done at vane angle is 90 and velocity is zero is the rate of change of its position with respect to a frame of reference, and is a function of time. Final Velocity is denoted by v_f symbol.

How to calculate Velocity at Inlet when Work Done at Vane Angle is 90 and Velocity is Zero using this online calculator? To use this online calculator for Velocity at Inlet when Work Done at Vane Angle is 90 and Velocity is Zero, enter Work Done (w), Specific Gravity of Fluid (G), Weight of Fluid (w_f) & Initial Velocity (u) and hit the calculate button. Here is how the Velocity at Inlet when Work Done at Vane Angle is 90 and Velocity is Zero calculation can be explained with given input values -> 90.15257 = (3900*10)/(12.36*35).

FAQ

What is Velocity at Inlet when Work Done at Vane Angle is 90 and Velocity is Zero?

The Velocity at inlet when work done at vane angle is 90 and velocity is zero is the rate of change of its position with respect to a frame of reference, and is a function of time and is represented as v_f = (w*G)/(w_f*u) or Final Velocity = (Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Initial Velocity). Work done by/on a system is energy transferred by/to the system to/from its surroundings, Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid, Weight of Fluid is the weight of fluid in Newtons or Kilo newton & Initial Velocity is the velocity at which motion starts.

How to calculate Velocity at Inlet when Work Done at Vane Angle is 90 and Velocity is Zero?

The Velocity at inlet when work done at vane angle is 90 and velocity is zero is the rate of change of its position with respect to a frame of reference, and is a function of time is calculated using Final Velocity = (Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Initial Velocity). To calculate Velocity at Inlet when Work Done at Vane Angle is 90 and Velocity is Zero, you need Work Done (w), Specific Gravity of Fluid (G), Weight of Fluid (w_f) & Initial Velocity (u). With our tool, you need to enter the respective value for Work Done, Specific Gravity of Fluid, Weight of Fluid & Initial Velocity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Final Velocity?

In this formula, Final Velocity uses Work Done, Specific Gravity of Fluid, Weight of Fluid & Initial Velocity. We can use 2 other way(s) to calculate the same, which is/are as follows -

Final Velocity = (((Torque Exerted on Wheel*Specific Gravity of Fluid)/Weight of Fluid)+(Velocity of Jet*Radius of wheel))/Radius of Outlet
Final Velocity = (((Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Angular Velocity))-Velocity of Jet*Radius of Outlet)/Radius of wheel

Home

FREE PDFs

🔍 Search