Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition Solution

STEP 0: Pre-Calculation Summary
Formula Used
Height of The Wave = (4*Horizontal Semi-axis of Water Particle*pi*Water Depth for Semi-Axis of Ellipse)/Length of Water Wave
Hw = (4*A*pi*ds)/L
This formula uses 1 Constants, 4 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Variables Used
Height of The Wave - (Measured in Meter) - Height of The Wave is the difference between the elevations of a crest and a neighboring trough.
Horizontal Semi-axis of Water Particle - Horizontal Semi-axis of Water Particle refers to the horizontal component of the oscillation of water particles caused by waves or other hydrodynamic forces in coastal and engineering.
Water Depth for Semi-Axis of Ellipse - (Measured in Meter) - Water Depth for Semi-Axis of Ellipse is the depth of water from the bed of sea for semi-axis of ellipse.
Length of Water Wave - (Measured in Meter) - Length of Water Wave is the horizontal distance between corresponding points on two successive waves.
STEP 1: Convert Input(s) to Base Unit
Horizontal Semi-axis of Water Particle: 7.4021 --> No Conversion Required
Water Depth for Semi-Axis of Ellipse: 13.5 Meter --> 13.5 Meter No Conversion Required
Length of Water Wave: 90 Meter --> 90 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Hw = (4*A*pi*ds)/L --> (4*7.4021*pi*13.5)/90
Evaluating ... ...
Hw = 13.9526297886822
STEP 3: Convert Result to Output's Unit
13.9526297886822 Meter --> No Conversion Required
FINAL ANSWER
13.9526297886822 13.95263 Meter <-- Height of The Wave
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has verified this Calculator and 900+ more calculators!

13 Horizontal and Vertical Semi-axis of ellipse Calculators

Phase Angle for Horizontal Fluid Particle Displacement
​ Go Phase Angle = asin(((Fluid Particle Displacement/Wave Amplitude)*(sinh(2*pi*Water Depth/Wavelength of Coast)/cosh(2*pi*(Elevation above the Bottom)/Wavelength of Coast)))^2)^2
Wave Height for Major Horizontal Semi-Axis Deep Water Condition
​ Go Height of The Wave = (2*Horizontal Semi-axis of Water Particle)/exp(2*pi*Sea Bed Elevation/Length of Water Wave)
Major Horizontal Semi Axis for Deep Water Condition
​ Go Horizontal Semi-axis of Water Particle = (Height of The Wave/2)*exp(2*pi*Sea Bed Elevation/Length of Water Wave)
Major Horizontal Semi Axis for Shallow Water Condition
​ Go Horizontal Semi-axis of Water Particle = (Height of The Wave/2)*(Length of Water Wave/(2*pi*Water Depth for Semi-Axis of Ellipse))
Water Depth for Major Horizontal Semi-Axis for Shallow Water Condition
​ Go Water Depth for Semi-Axis of Ellipse = (Height of The Wave*Length of Water Wave)/(4*pi*Horizontal Semi-axis of Water Particle)
Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition
​ Go Height of The Wave = (4*Horizontal Semi-axis of Water Particle*pi*Water Depth for Semi-Axis of Ellipse)/Length of Water Wave
Wavelength for Major Horizontal Semi-Axis for Shallow Water Condition
​ Go Length of Water Wave = (4*pi*Water Depth for Semi-Axis of Ellipse*Horizontal Semi-axis of Water Particle)/Height of The Wave
Wave Height for Minor Vertical Semi-Axis Deep Water Condition
​ Go Height of The Wave = (2*Vertical Semi-Axis)/exp(2*pi*Sea Bed Elevation/Length of Water Wave)
Minor Vertical Semi-Axis for Deep Water Condition
​ Go Vertical Semi-Axis = (Height of The Wave/2)*exp(2*pi*Sea Bed Elevation/Length of Water Wave)
Wave Height Given Minor Vertical Semi-Axis for Shallow Water Condition
​ Go Height of The Wave = (2*Vertical Semi-Axis)/(1+(Sea Bed Elevation/Water Depth for Semi-Axis of Ellipse))
Water Depth Given Minor Vertical Semi-Axis for Shallow Water Condition
​ Go Water Depth for Semi-Axis of Ellipse = Sea Bed Elevation/((Vertical Semi-Axis/(Height of The Wave/2))-1)
Sea Bed Given Minor Vertical Semi-Axis for Shallow Water Condition
​ Go Sea Bed Elevation = Water Depth for Semi-Axis of Ellipse*((Vertical Semi-Axis/(Height of The Wave/2))-1)
Minor Vertical Semi Axis for Shallow Water Condition
​ Go Vertical Semi-Axis = (Height of The Wave/2)*(1+Sea Bed Elevation/Water Depth for Semi-Axis of Ellipse)

Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition Formula

Height of The Wave = (4*Horizontal Semi-axis of Water Particle*pi*Water Depth for Semi-Axis of Ellipse)/Length of Water Wave
Hw = (4*A*pi*ds)/L

How Does Depth Affect Wavelength?

The change from deep to shallow water waves occurs when the depth of the water, d, becomes less than one half of the wavelength of the wave, λ. The speed of deep-water waves depends on the wavelength of the waves. We say that deep-water waves show dispersion. A wave with a longer wavelength travels at higher speed.

What is Shallow water conditions?

The shallow-water equations describe a thin layer of fluid of constant density in hydrostatic balance, bounded from below by the bottom topography and from above by a free surface. They exhibit a rich variety of features, because they have infinitely many conservation laws.

How to Calculate Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition?

Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition calculator uses Height of The Wave = (4*Horizontal Semi-axis of Water Particle*pi*Water Depth for Semi-Axis of Ellipse)/Length of Water Wave to calculate the Height of The Wave, The Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition is defined as the difference between the elevations of a crest and a neighboring trough, when we have information about major horizontal semi axis for shallow water. Height of The Wave is denoted by Hw symbol.

How to calculate Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition using this online calculator? To use this online calculator for Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition, enter Horizontal Semi-axis of Water Particle (A), Water Depth for Semi-Axis of Ellipse (ds) & Length of Water Wave (L) and hit the calculate button. Here is how the Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition calculation can be explained with given input values -> 13.95263 = (4*7.4021*pi*13.5)/90.

FAQ

What is Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition?
The Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition is defined as the difference between the elevations of a crest and a neighboring trough, when we have information about major horizontal semi axis for shallow water and is represented as Hw = (4*A*pi*ds)/L or Height of The Wave = (4*Horizontal Semi-axis of Water Particle*pi*Water Depth for Semi-Axis of Ellipse)/Length of Water Wave. Horizontal Semi-axis of Water Particle refers to the horizontal component of the oscillation of water particles caused by waves or other hydrodynamic forces in coastal and engineering, Water Depth for Semi-Axis of Ellipse is the depth of water from the bed of sea for semi-axis of ellipse & Length of Water Wave is the horizontal distance between corresponding points on two successive waves.
How to calculate Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition?
The Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition is defined as the difference between the elevations of a crest and a neighboring trough, when we have information about major horizontal semi axis for shallow water is calculated using Height of The Wave = (4*Horizontal Semi-axis of Water Particle*pi*Water Depth for Semi-Axis of Ellipse)/Length of Water Wave. To calculate Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition, you need Horizontal Semi-axis of Water Particle (A), Water Depth for Semi-Axis of Ellipse (ds) & Length of Water Wave (L). With our tool, you need to enter the respective value for Horizontal Semi-axis of Water Particle, Water Depth for Semi-Axis of Ellipse & Length of Water Wave and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Height of The Wave?
In this formula, Height of The Wave uses Horizontal Semi-axis of Water Particle, Water Depth for Semi-Axis of Ellipse & Length of Water Wave. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Height of The Wave = (2*Vertical Semi-Axis)/(1+(Sea Bed Elevation/Water Depth for Semi-Axis of Ellipse))
  • Height of The Wave = (2*Horizontal Semi-axis of Water Particle)/exp(2*pi*Sea Bed Elevation/Length of Water Wave)
  • Height of The Wave = (2*Vertical Semi-Axis)/exp(2*pi*Sea Bed Elevation/Length of Water Wave)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!