Wave Period in Non-propagated Wave Values Solution

STEP 0: Pre-Calculation Summary
Formula Used
Wave Period = (2*pi*(Time Averaged Water Depth/[g])^(1/2))/Non-propagated Wave Values
Tp = (2*pi*(dT/[g])^(1/2))/
This formula uses 2 Constants, 3 Variables
Constants Used
[g] - Gravitational acceleration on Earth Value Taken As 9.80665
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Variables Used
Wave Period - (Measured in Second) - Wave Period is defined as the time it takes for two successive crests to pass a given point.
Time Averaged Water Depth - (Measured in Meter) - Time Averaged Water Depth is the depth of water during average time.
Non-propagated Wave Values - Non-propagated Wave Values is elements of a wave function that don't transmit energy or information, often called standing waves.
STEP 1: Convert Input(s) to Base Unit
Time Averaged Water Depth: 5 Meter --> 5 Meter No Conversion Required
Non-propagated Wave Values: 0.047 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Tp = (2*pi*(dT/[g])^(1/2))/Ω --> (2*pi*(5/[g])^(1/2))/0.047
Evaluating ... ...
Tp = 95.4567567854545
STEP 3: Convert Result to Output's Unit
95.4567567854545 Second --> No Conversion Required
FINAL ANSWER
95.4567567854545 95.45676 Second <-- Wave Period
(Calculation completed in 00.004 seconds)

Credits

Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verified by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has verified this Calculator and 900+ more calculators!

10+ Wave-Current Interaction Calculators

Channel Velocity in Non-propagated Wave Values in Forbidden Region
Go Velocity in Channel = (Non-propagated Wave Values of 'F'*([g]*Time Averaged Water Depth)^0.5)/cos(Angle b/w Horizontal Velocity and Horizontal Wave)
Channel Depth in Non-propagated Wave values in Forbidden Region
Go Time Averaged Water Depth = (((Velocity in Channel*cos(Angle b/w Horizontal Velocity and Horizontal Wave)/Non-propagated Wave Values of 'F'))^2)/[g]
Non-propagated Wave Values in Forbidden Region Boundary Line
Go Non-propagated Wave Values of 'F' = (Velocity in Channel*cos(Angle b/w Horizontal Velocity and Horizontal Wave))/([g]*Time Averaged Water Depth)^0.5
Angle Wave Orthogonal makes with Current in Non-propagated Wave Values on Forbidden Region
Go Angle b/w Horizontal Velocity and Horizontal Wave = acos(Non-propagated Wave Values of 'F'*([g]*Time Averaged Water Depth)^0.5/Velocity in Channel)
Channel Depth in Non-propagated Wave Values
Go Time Averaged Water Depth = [g]*((Non-propagated Wave Values*Wave Period)/(2*pi))^(1/0.5)
Non-propagated Wave Values in Forbidden Region of Boundary Line
Go Non-propagated Wave Values = ((2*pi)/Wave Period)*(Time Averaged Water Depth/[g])^0.5
Wave Period in Non-propagated Wave Values
Go Wave Period = (2*pi*(Time Averaged Water Depth/[g])^(1/2))/Non-propagated Wave Values
Effect of Current on Wave Height
Go Wave Height = Inlet Current Wave Height Factor*Wave Height Entering Inlet
Inlet Current Wave Height Factor
Go Inlet Current Wave Height Factor = Wave Height/Wave Height Entering Inlet
Wave Height Entering Inlet
Go Wave Height Entering Inlet = Wave Height/Inlet Current Wave Height Factor

Wave Period in Non-propagated Wave Values Formula

Wave Period = (2*pi*(Time Averaged Water Depth/[g])^(1/2))/Non-propagated Wave Values
Tp = (2*pi*(dT/[g])^(1/2))/

What are the factors affecting Wave Height?

Wave Height is affected by wind speed, wind duration (or how long the wind blows), and fetch, which is the distance over water that the wind blows in a single direction. If wind speed is slow, only small waves result, regardless of wind duration or fetch.

What is waves and currents?

Waves are created by the wind and then radiate in all directions away from the disturbance. Currents represent the movement of water particles which is controlled by winds and density differences. Waves and currents can travel in opposite directions.

How to Calculate Wave Period in Non-propagated Wave Values?

Wave Period in Non-propagated Wave Values calculator uses Wave Period = (2*pi*(Time Averaged Water Depth/[g])^(1/2))/Non-propagated Wave Values to calculate the Wave Period, The Wave Period in Non-propagated Wave Values of Ω in forbidden region is defined as the time it takes for two successive crests (one wavelength) to pass a specified point and influences the wave height factor. Wave Period is denoted by Tp symbol.

How to calculate Wave Period in Non-propagated Wave Values using this online calculator? To use this online calculator for Wave Period in Non-propagated Wave Values, enter Time Averaged Water Depth (dT) & Non-propagated Wave Values (Ω) and hit the calculate button. Here is how the Wave Period in Non-propagated Wave Values calculation can be explained with given input values -> 95.45676 = (2*pi*(5/[g])^(1/2))/0.047.

FAQ

What is Wave Period in Non-propagated Wave Values?
The Wave Period in Non-propagated Wave Values of Ω in forbidden region is defined as the time it takes for two successive crests (one wavelength) to pass a specified point and influences the wave height factor and is represented as Tp = (2*pi*(dT/[g])^(1/2))/Ω or Wave Period = (2*pi*(Time Averaged Water Depth/[g])^(1/2))/Non-propagated Wave Values. Time Averaged Water Depth is the depth of water during average time & Non-propagated Wave Values is elements of a wave function that don't transmit energy or information, often called standing waves.
How to calculate Wave Period in Non-propagated Wave Values?
The Wave Period in Non-propagated Wave Values of Ω in forbidden region is defined as the time it takes for two successive crests (one wavelength) to pass a specified point and influences the wave height factor is calculated using Wave Period = (2*pi*(Time Averaged Water Depth/[g])^(1/2))/Non-propagated Wave Values. To calculate Wave Period in Non-propagated Wave Values, you need Time Averaged Water Depth (dT) & Non-propagated Wave Values (Ω). With our tool, you need to enter the respective value for Time Averaged Water Depth & Non-propagated Wave Values and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!