Width of Settling Zone given Height at Outlet Zone with respect to Discharge Solution

STEP 0: Pre-Calculation Summary
Formula Used
Width of settling zone = Outer Height*Discharge/(Length*Height of Crack*Falling Speed)
W = H*Q/(L*h*v')
This formula uses 6 Variables
Variables Used
Width of settling zone - (Measured in Joule per Kilogram) - Width of settling zone is the measurement or extent of something from side to side.
Outer Height - (Measured in Meter) - Outer Height is the length of outer side of 2D cross section.
Discharge - (Measured in Cubic Meter per Second) - Discharge is the rate of flow of a liquid.
Length - (Measured in Meter) - Length is the measurement or extent of something from end to end.
Height of Crack - (Measured in Meter) - Height of Crack is the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.
Falling Speed - (Measured in Meter per Second) - Falling Speed is the speed of the particle having smaller diameter.
STEP 1: Convert Input(s) to Base Unit
Outer Height: 40 Meter --> 40 Meter No Conversion Required
Discharge: 1.01 Cubic Meter per Second --> 1.01 Cubic Meter per Second No Conversion Required
Length: 5 Meter --> 5 Meter No Conversion Required
Height of Crack: 12000 Millimeter --> 12 Meter (Check conversion here)
Falling Speed: 0.1 Meter per Second --> 0.1 Meter per Second No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
W = H*Q/(L*h*v') --> 40*1.01/(5*12*0.1)
Evaluating ... ...
W = 6.73333333333333
STEP 3: Convert Result to Output's Unit
6.73333333333333 Joule per Kilogram --> No Conversion Required
FINAL ANSWER
6.73333333333333 6.733333 Joule per Kilogram <-- Width of settling zone
(Calculation completed in 00.004 seconds)

Credits

Created by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has created this Calculator and 500+ more calculators!
Verified by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has verified this Calculator and 600+ more calculators!

4 Width of Settling Zone Calculators

Width of Settling Zone given Height at Outlet Zone with respect to Discharge
Go Width of settling zone = Outer Height*Discharge/(Length*Height of Crack*Falling Speed)
Width of Settling Zone given Detention Time
Go Width of settling zone = (Detention time*Discharge)/(Length*Height of Crack)
Width of Settling Zone given Cross-section Area of Sedimentation Tank
Go Width of settling zone = Cross-Sectional Area/Height of Crack
Width of Settling Zone given Surface Area of Sedimentation Tank
Go Width of settling zone = Area/Length

Width of Settling Zone given Height at Outlet Zone with respect to Discharge Formula

Width of settling zone = Outer Height*Discharge/(Length*Height of Crack*Falling Speed)
W = H*Q/(L*h*v')

What is Dicharge ?

The discharge in the stream represents the run-off in the stream at a given section and includes surface run-off as well as ground water flow.

How to Calculate Width of Settling Zone given Height at Outlet Zone with respect to Discharge?

Width of Settling Zone given Height at Outlet Zone with respect to Discharge calculator uses Width of settling zone = Outer Height*Discharge/(Length*Height of Crack*Falling Speed) to calculate the Width of settling zone, The Width of Settling Zone given Height at Outlet Zone with respect to Discharge is defined as shorter distance between ends. Width of settling zone is denoted by W symbol.

How to calculate Width of Settling Zone given Height at Outlet Zone with respect to Discharge using this online calculator? To use this online calculator for Width of Settling Zone given Height at Outlet Zone with respect to Discharge, enter Outer Height (H), Discharge (Q), Length (L), Height of Crack (h) & Falling Speed (v') and hit the calculate button. Here is how the Width of Settling Zone given Height at Outlet Zone with respect to Discharge calculation can be explained with given input values -> 4.208333 = 40*1.01/(5*12*0.1).

FAQ

What is Width of Settling Zone given Height at Outlet Zone with respect to Discharge?
The Width of Settling Zone given Height at Outlet Zone with respect to Discharge is defined as shorter distance between ends and is represented as W = H*Q/(L*h*v') or Width of settling zone = Outer Height*Discharge/(Length*Height of Crack*Falling Speed). Outer Height is the length of outer side of 2D cross section, Discharge is the rate of flow of a liquid, Length is the measurement or extent of something from end to end, Height of Crack is the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress & Falling Speed is the speed of the particle having smaller diameter.
How to calculate Width of Settling Zone given Height at Outlet Zone with respect to Discharge?
The Width of Settling Zone given Height at Outlet Zone with respect to Discharge is defined as shorter distance between ends is calculated using Width of settling zone = Outer Height*Discharge/(Length*Height of Crack*Falling Speed). To calculate Width of Settling Zone given Height at Outlet Zone with respect to Discharge, you need Outer Height (H), Discharge (Q), Length (L), Height of Crack (h) & Falling Speed (v'). With our tool, you need to enter the respective value for Outer Height, Discharge, Length, Height of Crack & Falling Speed and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Width of settling zone?
In this formula, Width of settling zone uses Outer Height, Discharge, Length, Height of Crack & Falling Speed. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Width of settling zone = (Detention time*Discharge)/(Length*Height of Crack)
  • Width of settling zone = Area/Length
  • Width of settling zone = Cross-Sectional Area/Height of Crack
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!