Width of Plane in Double Parallel Fillet Weld Calculator

✖The Leg of Weld is the distance from the joint root to the toe of the weld.ⓘ Leg of Weld [h_l]			+10% -10%
✖Weld Cut Angle is the angle at which the weld is cut with the horizontal.ⓘ Weld Cut Angle [θ]			+10% -10%

✖Plane Width in Double Parallel Fillet Weld is defined as the width of the plane or the horizontal length of the plane on which load acts in a double parallel fillet weld.ⓘ Width of Plane in Double Parallel Fillet Weld [t']

⎘ Copy

👎

Formula

✖

Width of Plane in Double Parallel Fillet Weld

Formula

`"t'" = "h"_{"l"}/(sin("θ")+cos("θ"))`

Example

`"14.99066mm"="21.2mm"/(sin("45°")+cos("45°"))`

Calculator

LaTeX

Reset

👍

Download Parallel Fillet Welds Formulas PDF

Width of Plane in Double Parallel Fillet Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Plane Width in Double Parallel Fillet Weld = Leg of Weld/(sin(Weld Cut Angle)+cos(Weld Cut Angle))
t' = h_l/(sin(θ)+cos(θ))
This formula uses 2 Functions, 3 Variables

Functions Used

sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)
cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)

Variables Used

Plane Width in Double Parallel Fillet Weld - (Measured in Meter) - Plane Width in Double Parallel Fillet Weld is defined as the width of the plane or the horizontal length of the plane on which load acts in a double parallel fillet weld.
Leg of Weld - (Measured in Meter) - The Leg of Weld is the distance from the joint root to the toe of the weld.
Weld Cut Angle - (Measured in Radian) - Weld Cut Angle is the angle at which the weld is cut with the horizontal.

STEP 1: Convert Input(s) to Base Unit

Leg of Weld: 21.2 Millimeter --> 0.0212 Meter (Check conversion here)
Weld Cut Angle: 45 Degree --> 0.785398163397301 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t' = h_l/(sin(θ)+cos(θ)) --> 0.0212/(sin(0.785398163397301)+cos(0.785398163397301))

Evaluating ... ...

t' = 0.0149906637611548

STEP 3: Convert Result to Output's Unit

0.0149906637611548 Meter -->14.9906637611548 Millimeter (Check conversion here)

FINAL ANSWER

14.9906637611548 ≈ 14.99066 Millimeter <-- Plane Width in Double Parallel Fillet Weld

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Welded Joints » Parallel Fillet Welds » Width of Plane in Double Parallel Fillet Weld

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< 15 Parallel Fillet Welds Calculators

Length of Parallel Fillet Weld given Shear Stress and Weld Cut Angle

Go Length of Weld = Load on Parallel Fillet Weld*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Leg of Weld*Shear stress in parallel fillet weld)

Leg of Parallel Fillet Weld given Shear Stress and Weld Cut Angle

Go Leg of Weld = Load on Parallel Fillet Weld*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Length of Weld*Shear stress in parallel fillet weld)

Shear Stress in Parallel Fillet Weld given Load

Go Shear stress in parallel fillet weld = Load on Parallel Fillet Weld*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Length of Weld*Leg of Weld)

Force in Parallel Fillet Weld given Shear Stress

Go Load on Parallel Fillet Weld = Shear stress in parallel fillet weld*Length of Weld*Leg of Weld/(sin(Weld Cut Angle)+cos(Weld Cut Angle))

Length of Parallel Fillet Weld given Shear Stress

Go Length of Weld = Load on Parallel Fillet Weld/(Shear stress in parallel fillet weld*Leg of Weld*cos(pi/4))

Leg of Parallel Fillet Weld given Shear Stress

Go Leg of Weld = Load on Parallel Fillet Weld/(Shear stress in parallel fillet weld*Length of Weld*cos(pi/4))

Shear Stress Parallel Fillet Weld

Go Shear stress in parallel fillet weld = Load on Parallel Fillet Weld/(Length of Weld*Leg of Weld*cos(pi/4))

Width of Plane in Double Parallel Fillet Weld

Go Plane Width in Double Parallel Fillet Weld = Leg of Weld/(sin(Weld Cut Angle)+cos(Weld Cut Angle))

Maximum Shear Stress in Parallel Fillet Weld given Load

Go Shear stress in parallel fillet weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Shear Stress in Parallel Fillet Weld

Go Shear stress in parallel fillet weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Tensile Force on Parallel Fillet Weld Plate given Shear Stress

Go Load on Parallel Fillet Weld = Shear stress in parallel fillet weld*Length of Weld*Leg of Weld*0.707

Shear Stress in Double Parallel Fillet Weld

Go Shearing Stress = Load on Double Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Allowable Load in Parallel Fillet Weld per Unit Length

Go Allowable Load per unit Length of Weld = 0.707*Shear stress in parallel fillet weld*Leg of Weld

Leg of Parallel Fillet Weld given Throat of Weld

Go Leg of Weld = Throat Thickness of Weld/cos(pi/4)

Throat of Parallel Fillet Weld

Go Throat Thickness of Weld = Leg of Weld*cos(pi/4)

Width of Plane in Double Parallel Fillet Weld Formula

Plane Width in Double Parallel Fillet Weld = Leg of Weld/(sin(Weld Cut Angle)+cos(Weld Cut Angle))
t' = h_l/(sin(θ)+cos(θ))

Define Weldcut Angle?

A connection between the end or edge of one part and the face of the other part, the parts making an angle to one another of more than 5 up to and including 90° in the region of the joint.

How to Calculate Width of Plane in Double Parallel Fillet Weld?

Width of Plane in Double Parallel Fillet Weld calculator uses Plane Width in Double Parallel Fillet Weld = Leg of Weld/(sin(Weld Cut Angle)+cos(Weld Cut Angle)) to calculate the Plane Width in Double Parallel Fillet Weld, Width of Plane in Double Parallel Fillet Weld is defined as the width of the plane that is inclined at an angle θ with the horizontal axis of the Double Parallel Fillet Weld. Plane Width in Double Parallel Fillet Weld is denoted by t' symbol.

How to calculate Width of Plane in Double Parallel Fillet Weld using this online calculator? To use this online calculator for Width of Plane in Double Parallel Fillet Weld, enter Leg of Weld (h_l) & Weld Cut Angle (θ) and hit the calculate button. Here is how the Width of Plane in Double Parallel Fillet Weld calculation can be explained with given input values -> 14990.66 = 0.0212/(sin(0.785398163397301)+cos(0.785398163397301)).

FAQ

What is Width of Plane in Double Parallel Fillet Weld?

Width of Plane in Double Parallel Fillet Weld is defined as the width of the plane that is inclined at an angle θ with the horizontal axis of the Double Parallel Fillet Weld and is represented as t' = h_l/(sin(θ)+cos(θ)) or Plane Width in Double Parallel Fillet Weld = Leg of Weld/(sin(Weld Cut Angle)+cos(Weld Cut Angle)). The Leg of Weld is the distance from the joint root to the toe of the weld & Weld Cut Angle is the angle at which the weld is cut with the horizontal.

How to calculate Width of Plane in Double Parallel Fillet Weld?

Width of Plane in Double Parallel Fillet Weld is defined as the width of the plane that is inclined at an angle θ with the horizontal axis of the Double Parallel Fillet Weld is calculated using Plane Width in Double Parallel Fillet Weld = Leg of Weld/(sin(Weld Cut Angle)+cos(Weld Cut Angle)). To calculate Width of Plane in Double Parallel Fillet Weld, you need Leg of Weld (h_l) & Weld Cut Angle (θ). With our tool, you need to enter the respective value for Leg of Weld & Weld Cut Angle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search