Isentropic Work done rate for Adiabatic Compression Process using Cp Solution

STEP 0: Pre-Calculation Summary
Formula Used
Shaft Work (Isentropic) = Specific Heat Capacity*Temperature of Surface 1*((Pressure 2/Pressure 1)^([R]/Specific Heat Capacity)-1)
Wsisentropic = c*T1*((P2/P1)^([R]/c)-1)
This formula uses 1 Constants, 5 Variables
Constants Used
[R] - Universal gas constant Value Taken As 8.31446261815324
Variables Used
Shaft Work (Isentropic) - (Measured in Joule) - Shaft work (Isentropic) is work done by the shaft in a turbine/ compressor when the turbine expands reversibly and adiabatically.
Specific Heat Capacity - (Measured in Joule per Kilogram per K) - Specific Heat Capacity is the heat required to raise the temperature of the unit mass of a given substance by a given amount.
Temperature of Surface 1 - (Measured in Kelvin) - Temperature of Surface 1 is the temperature of the 1st surface.
Pressure 2 - (Measured in Pascal) - Pressure 2 is the pressure at give point 2.
Pressure 1 - (Measured in Pascal) - Pressure 1 is the pressure at give point 1.
STEP 1: Convert Input(s) to Base Unit
Specific Heat Capacity: 4.184 Joule per Kilogram per K --> 4.184 Joule per Kilogram per K No Conversion Required
Temperature of Surface 1: 101 Kelvin --> 101 Kelvin No Conversion Required
Pressure 2: 5200 Pascal --> 5200 Pascal No Conversion Required
Pressure 1: 2500 Pascal --> 2500 Pascal No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Wsisentropic = c*T1*((P2/P1)^([R]/c)-1) --> 4.184*101*((5200/2500)^([R]/4.184)-1)
Evaluating ... ...
Wsisentropic = 1388.63040430223
STEP 3: Convert Result to Output's Unit
1388.63040430223 Joule --> No Conversion Required
FINAL ANSWER
1388.63040430223 1388.63 Joule <-- Shaft Work (Isentropic)
(Calculation completed in 00.004 seconds)

Credits

Created by Shivam Sinha
National Institute Of Technology (NIT), Surathkal
Shivam Sinha has created this Calculator and 300+ more calculators!
Verified by Akshada Kulkarni
National Institute of Information Technology (NIIT), Neemrana
Akshada Kulkarni has verified this Calculator and 900+ more calculators!

23 Application of Thermodynamics to Flow Processes Calculators

Isentropic Work Done Rate for Adiabatic Compression Process using Gamma
Go Shaft Work (Isentropic) = [R]*(Temperature of Surface 1/((Heat Capacity Ratio-1)/Heat Capacity Ratio))*((Pressure 2/Pressure 1)^((Heat Capacity Ratio-1)/Heat Capacity Ratio)-1)
Volume Expansivity for Pumps using Entropy
Go Volume Expansivity = ((Specific Heat Capacity at Constant Pressure per K*ln(Temperature of Surface 2/Temperature of Surface 1))-Change in Entropy)/(Volume*Difference in Pressure)
Enthalpy for Pumps using Volume Expansivity for Pump
Go Change in Enthalpy = (Specific Heat Capacity at Constant Pressure per K*Overall Difference in Temperature)+(Specific Volume*(1-(Volume Expansivity*Temperature of Liquid))*Difference in Pressure)
Volume Expansivity for Pumps using Enthalpy
Go Volume Expansivity = ((((Specific Heat Capacity at Constant Pressure*Overall Difference in Temperature)-Change in Enthalpy)/(Volume*Difference in Pressure))+1)/Temperature of Liquid
Entropy for Pumps using Volume Expansivity for Pump
Go Change in Entropy = (Specific Heat Capacity*ln(Temperature of Surface 2/Temperature of Surface 1))-(Volume Expansivity*Volume*Difference in Pressure)
Isentropic Work done rate for Adiabatic Compression Process using Cp
Go Shaft Work (Isentropic) = Specific Heat Capacity*Temperature of Surface 1*((Pressure 2/Pressure 1)^([R]/Specific Heat Capacity)-1)
Overall Efficiency given Boiler, Cycle, Turbine, Generator, and Auxiliary Efficiency
Go Overall Efficiency = Boiler Efficiency*Cycle Efficiency*Turbine Efficiency*Generator Efficiency*Auxiliary Efficiency
Shaft Power
Go Shaft Power = 2*pi*Revolutions per Second*Torque Exerted on Wheel
Isentropic Change in Enthalpy using Compressor Efficiency and Actual Change in Enthalpy
Go Change in Enthalpy (Isentropic) = Compressor Efficiency*Change in Enthalpy
Compressor Efficiency using Actual and Isentropic Change in Enthalpy
Go Compressor Efficiency = Change in Enthalpy (Isentropic)/Change in Enthalpy
Actual Enthalpy Change using Isentropic Compression Efficieny
Go Change in Enthalpy = Change in Enthalpy (Isentropic)/Compressor Efficiency
Isentropic Change in Enthalpy using Turbine Efficiency and Actual Change in Enthalpy
Go Change in Enthalpy (Isentropic) = Change in Enthalpy/Turbine Efficiency
Actual Change in Enthalpy using Turbine Efficiency and Isentropic Change in Enthalpy
Go Change in Enthalpy = Turbine Efficiency*Change in Enthalpy (Isentropic)
Actual Work done using Compressor Efficiency and Isentropic Shaft Work
Go Actual Shaft Work = Shaft Work (Isentropic)/Compressor Efficiency
Isentropic Work Done using Compressor Efficiency and Actual Shaft Work
Go Shaft Work (Isentropic) = Compressor Efficiency*Actual Shaft Work
Compressor Efficiency using Actual and Isentropic Shaft Work
Go Compressor Efficiency = Shaft Work (Isentropic)/Actual Shaft Work
Actual Work Done using Turbine Efficiency and Isentropic Shaft Work
Go Actual Shaft Work = Turbine Efficiency*Shaft Work (Isentropic)
Isentropic Work Done using Turbine Efficiency and Actual Shaft Work
Go Shaft Work (Isentropic) = Actual Shaft Work/Turbine Efficiency
Turbine Efficiency using Actual and Isentropic Shaft Work
Go Turbine Efficiency = Actual Shaft Work/Shaft Work (Isentropic)
Nozzle Efficiency
Go Nozzle Efficiency = Change in Kinetic Energy/Kinetic Energy
Mass Flow Rate of Stream in Turbine (Expanders)
Go Mass Flow Rate = Work Done Rate/Change in Enthalpy
Change in Enthalpy in Turbine (Expanders)
Go Change in Enthalpy = Work Done Rate/Mass Flow Rate
Work Done Rate by Turbine (Expanders)
Go Work Done Rate = Change in Enthalpy*Mass Flow Rate

Isentropic Work done rate for Adiabatic Compression Process using Cp Formula

Shaft Work (Isentropic) = Specific Heat Capacity*Temperature of Surface 1*((Pressure 2/Pressure 1)^([R]/Specific Heat Capacity)-1)
Wsisentropic = c*T1*((P2/P1)^([R]/c)-1)

What is Thermodynamics?

Thermodynamics in physics is a branch that deals with heat, work and temperature, and their relation to energy, radiation and physical properties of matter. To be specific, it explains how thermal energy is converted to or from other forms of energy and how matter is affected by this process. Thermal energy is the energy that comes from heat. This heat is generated by the movement of tiny particles within an object, and the faster these particles move, the more heat is generated.
Thermodynamics is not concerned about how and at what rate these energy transformations are carried out. It is based on the initial and final states undergoing the change. It should also be noted that Thermodynamics is a macroscopic science. This means that it deals with the bulk system and does not deal with the molecular constitution of matter.

What is Isentropic Shaft work?

Isentropic Shaft work is work done by the shaft in a turbine/ compressor when the turbine expands reversibly and adiabatically (which is isentropic,i.e., ΔS = 0). The shaft work (isentropic) is the maximum that can be obtained from an adiabatic turbine with given inlet conditions and given discharge pressure.

How to Calculate Isentropic Work done rate for Adiabatic Compression Process using Cp?

Isentropic Work done rate for Adiabatic Compression Process using Cp calculator uses Shaft Work (Isentropic) = Specific Heat Capacity*Temperature of Surface 1*((Pressure 2/Pressure 1)^([R]/Specific Heat Capacity)-1) to calculate the Shaft Work (Isentropic), The Isentropic Work done rate for Adiabatic Compression Process using Cp formula is defined as the function of temperature 1, pressure 1 and 2, and specific heat capacity at constant pressure. Shaft Work (Isentropic) is denoted by Wsisentropic symbol.

How to calculate Isentropic Work done rate for Adiabatic Compression Process using Cp using this online calculator? To use this online calculator for Isentropic Work done rate for Adiabatic Compression Process using Cp, enter Specific Heat Capacity (c), Temperature of Surface 1 (T1), Pressure 2 (P2) & Pressure 1 (P1) and hit the calculate button. Here is how the Isentropic Work done rate for Adiabatic Compression Process using Cp calculation can be explained with given input values -> 1388.63 = 4.184*101*((5200/2500)^([R]/4.184)-1).

FAQ

What is Isentropic Work done rate for Adiabatic Compression Process using Cp?
The Isentropic Work done rate for Adiabatic Compression Process using Cp formula is defined as the function of temperature 1, pressure 1 and 2, and specific heat capacity at constant pressure and is represented as Wsisentropic = c*T1*((P2/P1)^([R]/c)-1) or Shaft Work (Isentropic) = Specific Heat Capacity*Temperature of Surface 1*((Pressure 2/Pressure 1)^([R]/Specific Heat Capacity)-1). Specific Heat Capacity is the heat required to raise the temperature of the unit mass of a given substance by a given amount, Temperature of Surface 1 is the temperature of the 1st surface, Pressure 2 is the pressure at give point 2 & Pressure 1 is the pressure at give point 1.
How to calculate Isentropic Work done rate for Adiabatic Compression Process using Cp?
The Isentropic Work done rate for Adiabatic Compression Process using Cp formula is defined as the function of temperature 1, pressure 1 and 2, and specific heat capacity at constant pressure is calculated using Shaft Work (Isentropic) = Specific Heat Capacity*Temperature of Surface 1*((Pressure 2/Pressure 1)^([R]/Specific Heat Capacity)-1). To calculate Isentropic Work done rate for Adiabatic Compression Process using Cp, you need Specific Heat Capacity (c), Temperature of Surface 1 (T1), Pressure 2 (P2) & Pressure 1 (P1). With our tool, you need to enter the respective value for Specific Heat Capacity, Temperature of Surface 1, Pressure 2 & Pressure 1 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Shaft Work (Isentropic)?
In this formula, Shaft Work (Isentropic) uses Specific Heat Capacity, Temperature of Surface 1, Pressure 2 & Pressure 1. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Shaft Work (Isentropic) = [R]*(Temperature of Surface 1/((Heat Capacity Ratio-1)/Heat Capacity Ratio))*((Pressure 2/Pressure 1)^((Heat Capacity Ratio-1)/Heat Capacity Ratio)-1)
  • Shaft Work (Isentropic) = Actual Shaft Work/Turbine Efficiency
  • Shaft Work (Isentropic) = Compressor Efficiency*Actual Shaft Work
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!