Workpiece surface speed given number of workpiece revolutions Calculator

✖The Number of Workpiece revolution is defined as the number of revolutions did workpiece take to complete the grinding.ⓘ The Number of Workpiece revolution [m]			+10% -10%
✖Workpiece removal parameter per unit time is the ratio of the volume of workpiece removed per unit time per unit thrust force.ⓘ Workpiece removal parameter per unit time [Λ_W]			+10% -10%
✖Effective stiffness is the total extent to which a workpiece resists deformation in response to an applied force.ⓘ Effective stiffness [S_e]			+10% -10%
✖The Width of grinding path is defined as the width of the path of the grinding tool.ⓘ The Width of grinding path [a_p]			+10% -10%

✖The Surface Speed of Workpiece is the speed of the surface rotating with respect to grinding tool.ⓘ Workpiece surface speed given number of workpiece revolutions [v_w]

⎘ Copy

👎

Formula

✖

Workpiece surface speed given number of workpiece revolutions

Formula

`"v"_{"w"} = "m"*"Λ"_{"W"}*"S"_{"e"}/(2*"a"_{"p"})`

Example

`"100.2182mm/s"="3"*"2.45"*"0.03N/m"/(2*"1100.1mm")`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF PDF Image

Workpiece surface speed given number of workpiece revolutions Solution

STEP 0: Pre-Calculation Summary

Formula Used

The Surface Speed of Workpiece = The Number of Workpiece revolution*Workpiece removal parameter per unit time*Effective stiffness/(2*The Width of grinding path)
v_w = m*Λ_W*S_e/(2*a_p)
This formula uses 5 Variables

Variables Used

The Surface Speed of Workpiece - (Measured in Meter per Second) - The Surface Speed of Workpiece is the speed of the surface rotating with respect to grinding tool.
The Number of Workpiece revolution - The Number of Workpiece revolution is defined as the number of revolutions did workpiece take to complete the grinding.
Workpiece removal parameter per unit time - Workpiece removal parameter per unit time is the ratio of the volume of workpiece removed per unit time per unit thrust force.
Effective stiffness - (Measured in Newton per Meter) - Effective stiffness is the total extent to which a workpiece resists deformation in response to an applied force.
The Width of grinding path - (Measured in Meter) - The Width of grinding path is defined as the width of the path of the grinding tool.

STEP 1: Convert Input(s) to Base Unit

The Number of Workpiece revolution: 3 --> No Conversion Required
Workpiece removal parameter per unit time: 2.45 --> No Conversion Required
Effective stiffness: 0.03 Newton per Meter --> 0.03 Newton per Meter No Conversion Required
The Width of grinding path: 1100.1 Millimeter --> 1.1001 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

v_w = m*Λ_W*S_e/(2*a_p) --> 3*2.45*0.03/(2*1.1001)

Evaluating ... ...

v_w = 0.100218161985274

STEP 3: Convert Result to Output's Unit

0.100218161985274 Meter per Second -->100.218161985274 Millimeter per Second (Check conversion here)

FINAL ANSWER

100.218161985274 ≈ 100.2182 Millimeter per Second <-- The Surface Speed of Workpiece

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Grinding Operation » Analysis of Grinding Process » Cylindrical Grinding cycle » Workpiece » Workpiece surface speed given number of workpiece revolutions

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< 14 Workpiece Calculators

Diameter of workpiece given feed and machine infeed speed

Go Grinding Workpiece diameter = Workpiece removal parameter per unit time*Diameter of Grinding Tool Wheel*((Machine Infeed speed/Feed Speed)-1)/The wheel removal parameter per unit time

Surface speed of workpiece given constant for grinding wheel

Go The Surface Speed of Workpiece = (Maximum Undeformed Chip Thickness^2)*Surface speed of wheel/(The Constant for particular grinding wheel*sqrt(The Feed))

Workpiece diameter given equivalent wheel diameter

Go Grinding Workpiece diameter = Equivalent Grinding Wheel diameter*Diameter of Grinding Tool Wheel/(Diameter of Grinding Tool Wheel-Equivalent Grinding Wheel diameter)

Workpiece removal parameter given number of workpiece revolution

Go Workpiece removal parameter per unit time = 2*The Surface Speed of Workpiece*The Width of grinding path/(The Number of Workpiece revolution*Effective stiffness)

Workpiece surface speed given number of workpiece revolutions

Go The Surface Speed of Workpiece = The Number of Workpiece revolution*Workpiece removal parameter per unit time*Effective stiffness/(2*The Width of grinding path)

Width of Grinding path given number of workpiece revolutions

Go The Width of grinding path = The Number of Workpiece revolution*Workpiece removal parameter per unit time*Effective stiffness/(2*The Surface Speed of Workpiece)

System stiffness given Number of workpiece revolution

Go Effective stiffness = 2*The Surface Speed of Workpiece*The Width of grinding path/(Workpiece removal parameter per unit time*The Number of Workpiece revolution)

Number of workpiece revolution

Go The Number of Workpiece revolution = 2*The Surface Speed of Workpiece*The Width of grinding path/(Workpiece removal parameter per unit time*Effective stiffness)

Diameter of workpiece given Metal removal rate

Go Grinding Workpiece diameter = Metal removal rate (MRR)/(Feed Speed*pi*The Width of grinding path)

Surface Speed of workpiece given Metal removal rate during grinding

Go The Surface Speed of Workpiece = Material removal rate (MRR)/(The Feed*The Width of grinding path)

Percentage Volume of Bond material in wheel of grinding

Go Percentage volume of bond material in grinding = (1.33*Wheel hardness number)+(2.2*Wheel structure number)-8

Number of workpiece revolutions given Time taken for spark out operation

Go The Number of Workpiece revolution = Time taken for spark-out operation*Rotational Frequency

Rotational frequency of workpiece given Number of workpiece revolution

Go Rotational Frequency = The Number of Workpiece revolution/Time taken for spark-out operation

Proportion of Total Energy flowing into workpiece

Go Proportion of total energy flowing into workpiece = (0.6+0.05*Relative Contact Area of Grain is the area)*100

Workpiece surface speed given number of workpiece revolutions Formula

The Surface Speed of Workpiece = The Number of Workpiece revolution*Workpiece removal parameter per unit time*Effective stiffness/(2*The Width of grinding path)
v_w = m*Λ_W*S_e/(2*a_p)

What is grinding used for?

Grinding is a machining process that's used to remove material from a workpiece via a grinding wheel. As the grinding wheel turns, it cuts material off the workpiece while creating a smooth surface texture in the process.

How to Calculate Workpiece surface speed given number of workpiece revolutions?

Workpiece surface speed given number of workpiece revolutions calculator uses The Surface Speed of Workpiece = The Number of Workpiece revolution*Workpiece removal parameter per unit time*Effective stiffness/(2*The Width of grinding path) to calculate the The Surface Speed of Workpiece, The Workpiece surface speed given number of workpiece revolutions is the speed of the surface rotating with respect to the grinding tool. The Surface Speed of Workpiece is denoted by v_w symbol.

How to calculate Workpiece surface speed given number of workpiece revolutions using this online calculator? To use this online calculator for Workpiece surface speed given number of workpiece revolutions, enter The Number of Workpiece revolution (m), Workpiece removal parameter per unit time (Λ_W), Effective stiffness (S_e) & The Width of grinding path (a_p) and hit the calculate button. Here is how the Workpiece surface speed given number of workpiece revolutions calculation can be explained with given input values -> 73629.67 = 3*2.45*0.03/(2*1.1001).

FAQ

What is Workpiece surface speed given number of workpiece revolutions?

The Workpiece surface speed given number of workpiece revolutions is the speed of the surface rotating with respect to the grinding tool and is represented as v_w = m*Λ_W*S_e/(2*a_p) or The Surface Speed of Workpiece = The Number of Workpiece revolution*Workpiece removal parameter per unit time*Effective stiffness/(2*The Width of grinding path). The Number of Workpiece revolution is defined as the number of revolutions did workpiece take to complete the grinding, Workpiece removal parameter per unit time is the ratio of the volume of workpiece removed per unit time per unit thrust force, Effective stiffness is the total extent to which a workpiece resists deformation in response to an applied force & The Width of grinding path is defined as the width of the path of the grinding tool.

How to calculate Workpiece surface speed given number of workpiece revolutions?

The Workpiece surface speed given number of workpiece revolutions is the speed of the surface rotating with respect to the grinding tool is calculated using The Surface Speed of Workpiece = The Number of Workpiece revolution*Workpiece removal parameter per unit time*Effective stiffness/(2*The Width of grinding path). To calculate Workpiece surface speed given number of workpiece revolutions, you need The Number of Workpiece revolution (m), Workpiece removal parameter per unit time (Λ_W), Effective stiffness (S_e) & The Width of grinding path (a_p). With our tool, you need to enter the respective value for The Number of Workpiece revolution, Workpiece removal parameter per unit time, Effective stiffness & The Width of grinding path and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate The Surface Speed of Workpiece?

In this formula, The Surface Speed of Workpiece uses The Number of Workpiece revolution, Workpiece removal parameter per unit time, Effective stiffness & The Width of grinding path. We can use 2 other way(s) to calculate the same, which is/are as follows -

The Surface Speed of Workpiece = Material removal rate (MRR)/(The Feed*The Width of grinding path)
The Surface Speed of Workpiece = (Maximum Undeformed Chip Thickness^2)*Surface speed of wheel/(The Constant for particular grinding wheel*sqrt(The Feed))

Home

FREE PDFs

🔍 Search