Static Density Calculation using Chapman-Rubesin Factor Calculator

✖The Density of a material shows the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object.ⓘ Density [ρ]			+10% -10%
✖The Kinematic Viscosity is an atmospheric variable defined as the ratio between the dynamic viscosity μ and the density ρ of the fluid.ⓘ Kinematic Viscosity [ν]			+10% -10%
✖Chapman–Rubesin factor, Chapman and Rubesin assumed a linear relationship between the coefficient of dynamic viscosity and temperature.ⓘ Chapman–Rubesin factor [C]			+10% -10%
✖Static viscosity, is the viscosity of continuous flow, viscosity measures the ratio of the viscous force to the inertial force on the fluid.ⓘ Static Viscosity [μe]			+10% -10%

✖Static density, is the density of the fluid when its not moving, or the density of fluid if we are moving relative to the fluid.ⓘ Static Density Calculation using Chapman-Rubesin Factor [ρ_e]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Hypersonic Flow Formula PDF PDF Image

Static Density Calculation using Chapman-Rubesin Factor Solution

STEP 0: Pre-Calculation Summary

Formula Used

Static Density = (Density*Kinematic Viscosity)/(Chapman–Rubesin factor*Static Viscosity)
ρ_e = (ρ*ν)/(C*μe)
This formula uses 5 Variables

Variables Used

Static Density - (Measured in Kilogram per Cubic Meter) - Static density, is the density of the fluid when its not moving, or the density of fluid if we are moving relative to the fluid.
Density - (Measured in Kilogram per Cubic Meter) - The Density of a material shows the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object.
Kinematic Viscosity - (Measured in Square Meter per Second) - The Kinematic Viscosity is an atmospheric variable defined as the ratio between the dynamic viscosity μ and the density ρ of the fluid.
Chapman–Rubesin factor - Chapman–Rubesin factor, Chapman and Rubesin assumed a linear relationship between the coefficient of dynamic viscosity and temperature.
Static Viscosity - (Measured in Pascal Second) - Static viscosity, is the viscosity of continuous flow, viscosity measures the ratio of the viscous force to the inertial force on the fluid.

STEP 1: Convert Input(s) to Base Unit

Density: 997 Kilogram per Cubic Meter --> 997 Kilogram per Cubic Meter No Conversion Required
Kinematic Viscosity: 7.25 Stokes --> 0.000725 Square Meter per Second (Check conversion here)
Chapman–Rubesin factor: 0.75 --> No Conversion Required
Static Viscosity: 11.2 Poise --> 1.12 Pascal Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ρ_e = (ρ*ν)/(C*μe) --> (997*0.000725)/(0.75*1.12)

Evaluating ... ...

ρ_e = 0.860505952380952

STEP 3: Convert Result to Output's Unit

0.860505952380952 Kilogram per Cubic Meter --> No Conversion Required

FINAL ANSWER

0.860505952380952 ≈ 0.860506 Kilogram per Cubic Meter <-- Static Density

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Fluid Mechanics » Hypersonic Flow » Viscous Flow Fundamentals » Aero Thermal Dynamics » Static Density Calculation using Chapman-Rubesin Factor

Credits

Created by Sanjay Krishna

Amrita School of Engineering (ASE), Vallikavu

Sanjay Krishna has created this Calculator and 300+ more calculators!

Verified by Maiarutselvan V

PSG College of Technology (PSGCT), Coimbatore

Maiarutselvan V has verified this Calculator and 300+ more calculators!

< Aero Thermal Dynamics Calculators

Aerodynamic Heating to Surface

LaTeX Go Local Heat Transfer Rate = Static Density*Static Velocity*Stanton Number*(Adiabatic Wall Enthalpy-Wall Enthalpy)

Non Dimensional Internal Energy Parameter

LaTeX Go Non-Dimensional Internal Energy = Internal Energy/(Specific Heat Capacity*Temperature)

Wall Temperature Calculation using Internal Energy Change

LaTeX Go Temperature of wall in Kelvin = Non-Dimensional Internal Energy*Free Stream Temperature

Non Dimensional Internal Energy Parameter using Wall-to-Freestream Temperature Ratio

LaTeX Go Non-Dimensional Internal Energy = Wall Temperature/Free Stream Temperature

Static Density Calculation using Chapman-Rubesin Factor Formula

LaTeX Go

Static Density = (Density*Kinematic Viscosity)/(Chapman–Rubesin factor*Static Viscosity)
ρ_e = (ρ*ν)/(C*μe)

What is Chapman–Rubesin factor?

In their analysis, Chapman and Rubesin assumed a linear relationship between the coefficient of dynamic viscosity and temperature, where the constant of proportionality (C) is chosen such that the correct value for viscosity near the surface is obtained.

How to Calculate Static Density Calculation using Chapman-Rubesin Factor?

Static Density Calculation using Chapman-Rubesin Factor calculator uses Static Density = (Density*Kinematic Viscosity)/(Chapman–Rubesin factor*Static Viscosity) to calculate the Static Density, The Static Density calculation using Chapman-Rubesin factor formula is defined as the ratio of product of density and viscosity to product of Chapman–Rubesin factor and static viscosity. Static Density is denoted by ρ_e symbol.

How to calculate Static Density Calculation using Chapman-Rubesin Factor using this online calculator? To use this online calculator for Static Density Calculation using Chapman-Rubesin Factor, enter Density (ρ), Kinematic Viscosity (ν), Chapman–Rubesin factor (C) & Static Viscosity (μe) and hit the calculate button. Here is how the Static Density Calculation using Chapman-Rubesin Factor calculation can be explained with given input values -> 0.860506 = (997*0.000725)/(0.75*1.12).

FAQ

What is Static Density Calculation using Chapman-Rubesin Factor?

The Static Density calculation using Chapman-Rubesin factor formula is defined as the ratio of product of density and viscosity to product of Chapman–Rubesin factor and static viscosity and is represented as ρ_e = (ρ*ν)/(C*μe) or Static Density = (Density*Kinematic Viscosity)/(Chapman–Rubesin factor*Static Viscosity). The Density of a material shows the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object, The Kinematic Viscosity is an atmospheric variable defined as the ratio between the dynamic viscosity μ and the density ρ of the fluid, Chapman–Rubesin factor, Chapman and Rubesin assumed a linear relationship between the coefficient of dynamic viscosity and temperature & Static viscosity, is the viscosity of continuous flow, viscosity measures the ratio of the viscous force to the inertial force on the fluid.

How to calculate Static Density Calculation using Chapman-Rubesin Factor?

The Static Density calculation using Chapman-Rubesin factor formula is defined as the ratio of product of density and viscosity to product of Chapman–Rubesin factor and static viscosity is calculated using Static Density = (Density*Kinematic Viscosity)/(Chapman–Rubesin factor*Static Viscosity). To calculate Static Density Calculation using Chapman-Rubesin Factor, you need Density (ρ), Kinematic Viscosity (ν), Chapman–Rubesin factor (C) & Static Viscosity (μe). With our tool, you need to enter the respective value for Density, Kinematic Viscosity, Chapman–Rubesin factor & Static Viscosity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search