Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates Calculator

✖Ambient air humidity refers to the moisture content present in the surrounding air at a given location an temperature.ⓘ Ambient Air Humidity [Y_A]			+10% -10%
✖Heat Transfer Coefficient of the Air Film is the proportionality factor between the heat transfer rate and the temperature driving force.ⓘ Heat Transfer Coefficient of the Air Film [h_G]			+10% -10%
✖Mass Transfer Coefficient of the Moisture is the proportionality factor between the mass transfer rate and the concentration driving force.ⓘ Mass Transfer Coefficient of the Moisture [k_Y']			+10% -10%
✖The heat of vaporization at wet bulb temperature is the energy required per unit mass to convert liquid water into vapor at the wet bulb temperature of the gas liquid mixture.ⓘ Heat of Vaporization at Wet Bulb Temperature [λ_W]			+10% -10%
✖The Temperature of Air is defined as the temperature at which the air-water mixture properties in humidification are calculated.ⓘ Temperature of Air [T_G]			+10% -10%
✖Wet bulb temperature is the lowest temperature attainable by evaporating water into air at constant pressure.ⓘ Wet Bulb Temperature [T_W]			+10% -10%

✖Air humidity at Wet Bulb Temperature refers to the moisture content present in the surrounding air at a given location at the Wet Bulb temperature.ⓘ Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates [Y_W']

⎘ Copy

👎

Formula

✖

Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates

Formula

`("Y"_{"W"}"'") = "Y"_{"A"}+("h"_{"G"}/(("k"_{"Y"}"'")*"λ"_{"W"}))*("T"_{"G"}-"T"_{"W"})`

Example

`"0.021328kg/kg of air"="0.016kg/kg of air"+("13.32W/m²*K"/("10E^-3mol/s*m²"*"2250kJ/kg"))*("30°C"-"21°C")`

Calculator

LaTeX

Reset

👍

Download Humidification & Dehumidification Formula PDF PDF Image

Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates Solution

STEP 0: Pre-Calculation Summary

Formula Used

Air Humidity at Wet Bulb Temperature = Ambient Air Humidity+(Heat Transfer Coefficient of the Air Film/(Mass Transfer Coefficient of the Moisture*Heat of Vaporization at Wet Bulb Temperature))*(Temperature of Air-Wet Bulb Temperature)
Y_W' = Y_A+(h_G/(k_Y'*λ_W))*(T_G-T_W)
This formula uses 7 Variables

Variables Used

Air Humidity at Wet Bulb Temperature - (Measured in Kg of water vapour per Kg of air) - Air humidity at Wet Bulb Temperature refers to the moisture content present in the surrounding air at a given location at the Wet Bulb temperature.
Ambient Air Humidity - (Measured in Kg of water vapour per Kg of air) - Ambient air humidity refers to the moisture content present in the surrounding air at a given location an temperature.
Heat Transfer Coefficient of the Air Film - (Measured in Watt per Square Meter per Kelvin) - Heat Transfer Coefficient of the Air Film is the proportionality factor between the heat transfer rate and the temperature driving force.
Mass Transfer Coefficient of the Moisture - (Measured in Mole per Second Square Meter) - Mass Transfer Coefficient of the Moisture is the proportionality factor between the mass transfer rate and the concentration driving force.
Heat of Vaporization at Wet Bulb Temperature - (Measured in Joule per Kilogram) - The heat of vaporization at wet bulb temperature is the energy required per unit mass to convert liquid water into vapor at the wet bulb temperature of the gas liquid mixture.
Temperature of Air - (Measured in Kelvin) - The Temperature of Air is defined as the temperature at which the air-water mixture properties in humidification are calculated.
Wet Bulb Temperature - (Measured in Kelvin) - Wet bulb temperature is the lowest temperature attainable by evaporating water into air at constant pressure.

STEP 1: Convert Input(s) to Base Unit

Ambient Air Humidity: 0.016 Kg of water vapour per Kg of air --> 0.016 Kg of water vapour per Kg of air No Conversion Required
Heat Transfer Coefficient of the Air Film: 13.32 Watt per Square Meter per Kelvin --> 13.32 Watt per Square Meter per Kelvin No Conversion Required
Mass Transfer Coefficient of the Moisture: 0.01 Mole per Second Square Meter --> 0.01 Mole per Second Square Meter No Conversion Required
Heat of Vaporization at Wet Bulb Temperature: 2250 Kilojoule per Kilogram --> 2250000 Joule per Kilogram (Check conversion here)
Temperature of Air: 30 Celsius --> 303.15 Kelvin (Check conversion here)
Wet Bulb Temperature: 21 Celsius --> 294.15 Kelvin (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Y_W' = Y_A+(h_G/(k_Y'*λ_W))*(T_G-T_W) --> 0.016+(13.32/(0.01*2250000))*(303.15-294.15)

Evaluating ... ...

Y_W' = 0.021328

STEP 3: Convert Result to Output's Unit

0.021328 Kg of water vapour per Kg of air --> No Conversion Required

FINAL ANSWER

0.021328 Kg of water vapour per Kg of air <-- Air Humidity at Wet Bulb Temperature

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Chemical Engineering » Mass Transfer Operations » Humidification & Dehumidification » Adiabatic Saturation Temperature and Wet Bulb Temperature » Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates

Credits

Created by Vaibhav Mishra

DJ Sanghvi College of Engineering (DJSCE), Mumbai

Vaibhav Mishra has created this Calculator and 300+ more calculators!

Verified by Heet

Thadomal Shahani Engineering College (Tsec), Mumbai

Heet has verified this Calculator and 25+ more calculators!

< 13 Adiabatic Saturation Temperature and Wet Bulb Temperature Calculators

Mass Transfer Coefficient based on Wet Bulb Temperature

Go Mass Transfer Coefficient of the Moisture = ((Temperature of Air-Wet Bulb Temperature)/(Air Humidity at Wet Bulb Temperature-Ambient Air Humidity))*(Heat Transfer Coefficient of the Air Film/Heat of Vaporization at Wet Bulb Temperature)

Latent Heat of Air based on Wet Bulb Temperature

Go Heat of Vaporization at Wet Bulb Temperature = ((Temperature of Air-Wet Bulb Temperature)/(Air Humidity at Wet Bulb Temperature-Ambient Air Humidity))*(Heat Transfer Coefficient of the Air Film/Mass Transfer Coefficient of the Moisture)

Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates

Go Air Humidity at Wet Bulb Temperature = Ambient Air Humidity+(Heat Transfer Coefficient of the Air Film/(Mass Transfer Coefficient of the Moisture*Heat of Vaporization at Wet Bulb Temperature))*(Temperature of Air-Wet Bulb Temperature)

Heat Transfer Coefficient based on Wet Bulb Temperature

Go Heat Transfer Coefficient of the Air Film = Mass Transfer Coefficient of the Moisture*Heat of Vaporization at Wet Bulb Temperature*((Air Humidity at Wet Bulb Temperature-Ambient Air Humidity)/(Temperature of Air-Wet Bulb Temperature))

Ambient Air Temperature based on Wet Bulb Temperature

Go Temperature of Air = Wet Bulb Temperature+(Air Humidity at Wet Bulb Temperature-Ambient Air Humidity)*((Mass Transfer Coefficient of the Moisture*Heat of Vaporization at Wet Bulb Temperature)/Heat Transfer Coefficient of the Air Film)

Ambient Air Humidity based on Wet Bulb Temperature

Go Ambient Air Humidity = Air Humidity at Wet Bulb Temperature-(Heat Transfer Coefficient of the Air Film/(Mass Transfer Coefficient of the Moisture*Heat of Vaporization at Wet Bulb Temperature))*(Temperature of Air-Wet Bulb Temperature)

Wet Bulb Temperature

Go Wet Bulb Temperature = Temperature of Air-(Air Humidity at Wet Bulb Temperature-Ambient Air Humidity)*((Mass Transfer Coefficient of the Moisture*Heat of Vaporization at Wet Bulb Temperature)/Heat Transfer Coefficient of the Air Film)

Saturated Exit Air Humidity based on Adiabatic Saturation Temperature

Go Saturated Exit Air Humidity = (Temperature of Air-Adiabatic Saturation Temperature)*(Humid Heat/Heat of Vaporization at Adiabatic Saturation Temp)+Inlet Air Humidity

Air Inlet Temperature based on Adiabatic Saturation Temperature

Go Temperature of Air = (Saturated Exit Air Humidity-Inlet Air Humidity)*(Heat of Vaporization at Adiabatic Saturation Temp/Humid Heat)+Adiabatic Saturation Temperature

Latent Heat of Air based on Adiabatic Saturation Temperature

Go Heat of Vaporization at Adiabatic Saturation Temp = (Temperature of Air-Adiabatic Saturation Temperature)/(Saturated Exit Air Humidity-Inlet Air Humidity)*Humid Heat

Inlet Air Humidity based on Adiabatic Saturation Temperature

Go Inlet Air Humidity = Saturated Exit Air Humidity-(Temperature of Air-Adiabatic Saturation Temperature)*(Humid Heat/Heat of Vaporization at Adiabatic Saturation Temp)

Humid Heat of Air based on Adiabatic Saturation Temperature

Go Humid Heat = (Saturated Exit Air Humidity-Inlet Air Humidity)/(Temperature of Air-Adiabatic Saturation Temperature)*Heat of Vaporization at Adiabatic Saturation Temp

Adiabatic Saturation Temperature

Go Adiabatic Saturation Temperature = Temperature of Air-(Saturated Exit Air Humidity-Inlet Air Humidity)*(Heat of Vaporization at Adiabatic Saturation Temp/Humid Heat)

Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates Formula

What is Wet Bulb Temperature?

Wet bulb temperature is the lowest temperature that can be achieved by evaporating water into air at constant pressure, measured using a thermometer with its bulb covered by a wet cloth. It provides insights into the cooling potential of air through evaporation and is a key parameter in psychrometrics, commonly used in HVAC engineering and meteorology. Wet bulb temperature helps assess humidity levels, determine dew point, and evaluate the efficiency of cooling processes without direct application mentioned.

What is Humidification Process?

The humidification process involves adding moisture to indoor air to increase its relative humidity. It begins by measuring the current humidity level using a hygrometer. A desired humidity level is set, typically between 30% and 60%. Different humidification methods like evaporative, steam, or ultrasonic are chosen based on space requirements. The humidifier, often equipped with a humidistat, is then operated to release moisture. As the humidifier maintains the setpoint, it continuously monitors and controls humidity levels. Regular maintenance is essential to prevent issues and ensure safe and effective operation, especially in dry environments or during winter when indoor heating can dry out the air.

How to Calculate Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates?

Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates calculator uses Air Humidity at Wet Bulb Temperature = Ambient Air Humidity+(Heat Transfer Coefficient of the Air Film/(Mass Transfer Coefficient of the Moisture*Heat of Vaporization at Wet Bulb Temperature))*(Temperature of Air-Wet Bulb Temperature) to calculate the Air Humidity at Wet Bulb Temperature, The Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates formula is defined as the Air Humidity of an air water system at Wet Bulb Temperature calculated based on the heat & mass Transfer rates. Air Humidity at Wet Bulb Temperature is denoted by Y_W' symbol.

How to calculate Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates using this online calculator? To use this online calculator for Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates, enter Ambient Air Humidity (Y_A), Heat Transfer Coefficient of the Air Film (h_G), Mass Transfer Coefficient of the Moisture (k_Y'), Heat of Vaporization at Wet Bulb Temperature (λ_W), Temperature of Air (T_G) & Wet Bulb Temperature (T_W) and hit the calculate button. Here is how the Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates calculation can be explained with given input values -> 5.344 = 0.016+(13.32/(0.01*2250000))*(303.15-294.15).

FAQ

What is Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates?

The Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates formula is defined as the Air Humidity of an air water system at Wet Bulb Temperature calculated based on the heat & mass Transfer rates and is represented as Y_W' = Y_A+(h_G/(k_Y'*λ_W))*(T_G-T_W) or Air Humidity at Wet Bulb Temperature = Ambient Air Humidity+(Heat Transfer Coefficient of the Air Film/(Mass Transfer Coefficient of the Moisture*Heat of Vaporization at Wet Bulb Temperature))*(Temperature of Air-Wet Bulb Temperature). Ambient air humidity refers to the moisture content present in the surrounding air at a given location an temperature, Heat Transfer Coefficient of the Air Film is the proportionality factor between the heat transfer rate and the temperature driving force, Mass Transfer Coefficient of the Moisture is the proportionality factor between the mass transfer rate and the concentration driving force, The heat of vaporization at wet bulb temperature is the energy required per unit mass to convert liquid water into vapor at the wet bulb temperature of the gas liquid mixture, The Temperature of Air is defined as the temperature at which the air-water mixture properties in humidification are calculated & Wet bulb temperature is the lowest temperature attainable by evaporating water into air at constant pressure.

How to calculate Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates?

The Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates formula is defined as the Air Humidity of an air water system at Wet Bulb Temperature calculated based on the heat & mass Transfer rates is calculated using Air Humidity at Wet Bulb Temperature = Ambient Air Humidity+(Heat Transfer Coefficient of the Air Film/(Mass Transfer Coefficient of the Moisture*Heat of Vaporization at Wet Bulb Temperature))*(Temperature of Air-Wet Bulb Temperature). To calculate Air Humidity at Wet Bulb Temperature based on Heat and Mass Transfer Rates, you need Ambient Air Humidity (Y_A), Heat Transfer Coefficient of the Air Film (h_G), Mass Transfer Coefficient of the Moisture (k_Y'), Heat of Vaporization at Wet Bulb Temperature (λ_W), Temperature of Air (T_G) & Wet Bulb Temperature (T_W). With our tool, you need to enter the respective value for Ambient Air Humidity, Heat Transfer Coefficient of the Air Film, Mass Transfer Coefficient of the Moisture, Heat of Vaporization at Wet Bulb Temperature, Temperature of Air & Wet Bulb Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search