## Anodic Potential Solution

STEP 0: Pre-Calculation Summary
Formula Used
Anodic Potential = Cathodic Potential+(57/Moles of Electron)
Epa = Epc+(57/me)
This formula uses 3 Variables
Variables Used
Anodic Potential - Anodic Potential is defined as electrode potential were the metal ions will be pulled away the electrode.
Cathodic Potential - (Measured in Volt per Meter) - Cathodic Potential is defined as electrode potential were the metal ions will be pulled towards the electrode.
Moles of Electron - Moles of Electron is a unit of measurement that is the amount of a pure substance containing the same number of chemical units in carbon.
STEP 1: Convert Input(s) to Base Unit
Cathodic Potential: 3.5 Volt per Meter --> 3.5 Volt per Meter No Conversion Required
Moles of Electron: 2 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Epa = Epc+(57/me) --> 3.5+(57/2)
Evaluating ... ...
Epa = 32
STEP 3: Convert Result to Output's Unit
32 --> No Conversion Required
32 <-- Anodic Potential
(Calculation completed in 00.004 seconds)
You are here -
Home »

## Credits

Created by Torsha_Paul
University of Calcutta (CU), Kolkata
Torsha_Paul has created this Calculator and 200+ more calculators!
Verified by Soupayan banerjee
National University of Judicial Science (NUJS), Kolkata
Soupayan banerjee has verified this Calculator and 800+ more calculators!

## < 25 Potentiometry and Voltametry Calculators

Number of Electron given CI
Number of electrons given CI = (Cathodic Current/(2.69*(10^8)*Area of Electrode*Concentration given CI*(Diffusion Constant^0.5)*(Sweep Rate^0.5)))^(2/3)
Maximum Diffusion Current
Maximum Diffusion Current = 708*Moles of Analyte*(Diffusion Constant^(1/2))*(Rate of Flow of Mercury^(2/3))*(Drop Time^(1/6))*Concentration at given time
Area of Electrode
Area of Electrode = (Cathodic Current/(2.69*(10^8)*Number of electrons given CI*Concentration given CI*(Diffusion Constant^0.5)*(Sweep Rate^0.5)))^(2/3)
Concentration given CI
Concentration given CI = Cathodic Current/(2.69*(10^8)*(Number of electrons given CI^1.5)*Area of Electrode*(Diffusion Constant^0.5)*(Sweep Rate^0.5))
Cathodic Current
Cathodic Current = 2.69*(10^8)*(Number of electrons given CI^1.5)*Area of Electrode*Concentration given CI*(Diffusion Constant^0.5)*(Sweep Rate^0.5)
Diffusion Constant given Current
Diffusion Constant = (Cathodic Current/(2.69*(10^8)*Number of electrons given CI*Concentration given CI*(Sweep Rate^0.5)*Area of Electrode))^(4/3)
Sweep Rate
Sweep Rate = (Cathodic Current/(2.69*(10^8)*Number of electrons given CI*Concentration given CI*(Diffusion Constant^0.5)*Area of Electrode))^(4/3)
Current in Potentiometry
Current in Potentiometry = (Cell Potential in Potentiometry-Applied Potential in Potentiometry)/Resistance in Potentiometry
Applied Potential
Applied Potential in Potentiometry = Cell Potential in Potentiometry+(Current in Potentiometry*Resistance in Potentiometry)
EMF at Cell Junction
Junction EMF = Cell Potential in Potentiometry-Indicator EMF+Reference EMF
Cell Potential
Cell Potential in Potentiometry = Indicator EMF-Reference EMF+Junction EMF
Indicator EMF
Indicator EMF = Reference EMF-Junction EMF+Cell Potential in Potentiometry
Reference EMF
Reference EMF = Indicator EMF+Junction EMF-Cell Potential in Potentiometry
Number of Moles of Electron
Moles of Electron = Charge given Moles/(Moles of Analyte*[Faraday])
Moles of Analyte
Moles of Analyte = Charge given Moles/(Moles of Electron*[Faraday])
Charge given Moles
Charge given Moles = Moles of Electron*Moles of Analyte*[Faraday]
Potentiometric Concentration
Concentration at given time = Potentiometric Current/Potentiometric Constant
Potentiometric Constant
Potentiometric Constant = Potentiometric Current/Concentration at given time
Potentiometric Current
Potentiometric Current = Potentiometric Constant*Concentration at given time
Moles of Electron given Potentials
Moles of Electron = 57/(Anodic Potential-Cathodic Potential)
Cathodic Potential
Cathodic Potential = Anodic Potential-(57/Moles of Electron)
Anodic Potential
Anodic Potential = Cathodic Potential+(57/Moles of Electron)
Cathodic Potential given half potential
Cathodic Potential = (Half Potential/0.5)-Anodic Potential
Anodic Potential given half potential
Anodic Potential = (Half Potential/0.5)-Cathodic Potential
Half Potential
Half Potential = 0.5*(Anodic Potential+Cathodic Potential)

## Anodic Potential Formula

Anodic Potential = Cathodic Potential+(57/Moles of Electron)
Epa = Epc+(57/me)

## What is cyclic voltametry?

Cyclic voltammetry (CV) is an electrochemical technique that studies the redox
properties of a chemical species. It's a type of potentio dynamic measurement that involves applying a potential waveform to an electrochemical cell and measuring the resulting current.

## How to Calculate Anodic Potential?

Anodic Potential calculator uses Anodic Potential = Cathodic Potential+(57/Moles of Electron) to calculate the Anodic Potential, The Anodic Potential formula is defined as electrode potential were the metal ions will be pulled away the electrode. Anodic Potential is denoted by Epa symbol.

How to calculate Anodic Potential using this online calculator? To use this online calculator for Anodic Potential, enter Cathodic Potential (Epc) & Moles of Electron (me) and hit the calculate button. Here is how the Anodic Potential calculation can be explained with given input values -> 35 = 3.5+(57/2).

### FAQ

What is Anodic Potential?
The Anodic Potential formula is defined as electrode potential were the metal ions will be pulled away the electrode and is represented as Epa = Epc+(57/me) or Anodic Potential = Cathodic Potential+(57/Moles of Electron). Cathodic Potential is defined as electrode potential were the metal ions will be pulled towards the electrode & Moles of Electron is a unit of measurement that is the amount of a pure substance containing the same number of chemical units in carbon.
How to calculate Anodic Potential?
The Anodic Potential formula is defined as electrode potential were the metal ions will be pulled away the electrode is calculated using Anodic Potential = Cathodic Potential+(57/Moles of Electron). To calculate Anodic Potential, you need Cathodic Potential (Epc) & Moles of Electron (me). With our tool, you need to enter the respective value for Cathodic Potential & Moles of Electron and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Anodic Potential?
In this formula, Anodic Potential uses Cathodic Potential & Moles of Electron. We can use 1 other way(s) to calculate the same, which is/are as follows -
• Anodic Potential = (Half Potential/0.5)-Cathodic Potential
Let Others Know