Area of Double Fillet Weld given Tensile Force Calculator

✖Tensile Force on Welded Plates is the stretching force acting on the plates that are welded.ⓘ Tensile Force on Welded Plates [P]			+10% -10%
✖Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.ⓘ Tensile Stress [σ_t]			+10% -10%

✖Area of double fillet weld is that area which is prepared by joining two metals for welding.ⓘ Area of Double Fillet Weld given Tensile Force [A_double]

⎘ Copy

👎

Formula

✖

Area of Double Fillet Weld given Tensile Force

Formula

`"A"_{"double"} = "P"/"σ"_{"t"}`

Example

`"515.625mm²"="16.5kN"/"32MPa"`

Calculator

LaTeX

Reset

👍

Download Strength of Materials Formula PDF

Area of Double Fillet Weld given Tensile Force Solution

STEP 0: Pre-Calculation Summary

Formula Used

Area of Double Fillet Weld = Tensile Force on Welded Plates/Tensile Stress
A_double = P/σ_t
This formula uses 3 Variables

Variables Used

Area of Double Fillet Weld - (Measured in Square Meter) - Area of double fillet weld is that area which is prepared by joining two metals for welding.
Tensile Force on Welded Plates - (Measured in Newton) - Tensile Force on Welded Plates is the stretching force acting on the plates that are welded.
Tensile Stress - (Measured in Pascal) - Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.

STEP 1: Convert Input(s) to Base Unit

Tensile Force on Welded Plates: 16.5 Kilonewton --> 16500 Newton (Check conversion here)
Tensile Stress: 32 Megapascal --> 32000000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_double = P/σ_t --> 16500/32000000

Evaluating ... ...

A_double = 0.000515625

STEP 3: Convert Result to Output's Unit

0.000515625 Square Meter -->515.625 Square Millimeter (Check conversion here)

FINAL ANSWER

515.625 Square Millimeter <-- Area of Double Fillet Weld

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Welded Joints » Types of Welded Joints » Area of Fillet Weld » Area of Double Fillet Weld given Tensile Force

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< 8 Area of Fillet Weld Calculators

Area of Double Fillet Weld given Tensile Force

Go Area of Double Fillet Weld = Tensile Force on Welded Plates/Tensile Stress

Area of Single Fillet Weld given Tensile Force

Go Area of Single Fillet Weld = Tensile Force on Welded Plates/Tensile Stress

Area of Fillet Weld in given Thickness of Plate for Double Fillet Lap Joint

Go Weld Bed Area = 1.414*Length of Weld*Thickness of Plate

Area of Fillet Weld given Thickness of Plate for Single Fillet Lap Joint

Go Weld Bed Area = 0.707*Length of Weld*Thickness of Plate

Area of Parallel Fillet Weld given Thickness of Plate

Go Weld Bed Area = 1.414*Length of Weld*Thickness of Plate

Area of Fillet Weld given Throat Thickness for Double Fillet Lap Joint

Go Weld Bed Area = 2*Length of Weld*Throat Thickness

Area of Parallel Fillet Weld given Throat Thickness

Go Weld Bed Area = 2*Length of Weld*Throat Thickness

Area of Fillet Weld given Throat Thickness for Single Fillet Lap Joint

Go Weld Bed Area = Length of Weld*Throat Thickness

Area of Double Fillet Weld given Tensile Force Formula

Area of Double Fillet Weld = Tensile Force on Welded Plates/Tensile Stress
A_double = P/σ_t

What do you mean by maximum shear stress theory?

The maximum shear stress theory states that the failure or yielding of a ductile material will occur when the maximum shear stress of the material equals or exceeds the shear stress value at the yield point in the uniaxial tensile test.

How to Calculate Area of Double Fillet Weld given Tensile Force?

Area of Double Fillet Weld given Tensile Force calculator uses Area of Double Fillet Weld = Tensile Force on Welded Plates/Tensile Stress to calculate the Area of Double Fillet Weld, The Area of Double Fillet Weld given Tensile Force formula is defined as that area that is prepared by joining two metals for welding. Area of Double Fillet Weld is denoted by A_double symbol.

How to calculate Area of Double Fillet Weld given Tensile Force using this online calculator? To use this online calculator for Area of Double Fillet Weld given Tensile Force, enter Tensile Force on Welded Plates (P) & Tensile Stress (σ_t) and hit the calculate button. Here is how the Area of Double Fillet Weld given Tensile Force calculation can be explained with given input values -> 5.2E+8 = 16500/32000000.

FAQ

What is Area of Double Fillet Weld given Tensile Force?

The Area of Double Fillet Weld given Tensile Force formula is defined as that area that is prepared by joining two metals for welding and is represented as A_double = P/σ_t or Area of Double Fillet Weld = Tensile Force on Welded Plates/Tensile Stress. Tensile Force on Welded Plates is the stretching force acting on the plates that are welded & Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.

How to calculate Area of Double Fillet Weld given Tensile Force?

The Area of Double Fillet Weld given Tensile Force formula is defined as that area that is prepared by joining two metals for welding is calculated using Area of Double Fillet Weld = Tensile Force on Welded Plates/Tensile Stress. To calculate Area of Double Fillet Weld given Tensile Force, you need Tensile Force on Welded Plates (P) & Tensile Stress (σ_t). With our tool, you need to enter the respective value for Tensile Force on Welded Plates & Tensile Stress and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search