Area of well given specific capacity per unit well area of aquifer Solution

STEP 0: Pre-Calculation Summary
Formula Used
Area of the Well = Proportionality Constant/Specific Capacity
A = K0/Ks
This formula uses 3 Variables
Variables Used
Area of the Well - (Measured in Square Meter) - Area of the Well is denoted by A symbol.
Proportionality Constant - The proportionality constant depends upon the characteristics of the aquifer and the area of the well. It represents discharge per unit drawdown also called specific capacity of well.
Specific Capacity - Specific Capacity is the amount of water furnished under a standard unit head.
STEP 1: Convert Input(s) to Base Unit
Proportionality Constant: 4.285 --> No Conversion Required
Specific Capacity: 0.75 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
A = K0/Ks --> 4.285/0.75
Evaluating ... ...
A = 5.71333333333333
STEP 3: Convert Result to Output's Unit
5.71333333333333 Square Meter --> No Conversion Required
FINAL ANSWER
5.71333333333333 5.713333 Square Meter <-- Area of the Well
(Calculation completed in 00.004 seconds)

Credits

Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verified by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has verified this Calculator and 900+ more calculators!

9 Recuperation Test Calculators

Proportionality constant per unit well area of aquifer
Go Proportionality Constant = Area of the Well*((1/Time Interval)*ln(Drawdown at the Start of Recuperation/Drawdown at a Time))
Equation for Time Interval
Go Time Interval = (Area of the Well/Proportionality Constant)*ln(Drawdown at the Start of Recuperation/Drawdown at a Time)
Area of well given time interval
Go Area of the Well = Proportionality Constant*Time Interval/ln(Drawdown at the Start of Recuperation/Drawdown at a Time)
Depression Head when Discharge from Open Well is Considered
Go Depression Head = Yield from an open well/(Specific Capacity*Area of the Well)
Area of well when discharged from open well is considered
Go Area of the Well = Yield from an open well/(Specific Capacity*Depression Head)
Discharge from Open Well under Depression Head
Go Yield from an open well = Specific Capacity*Area of the Well*Depression Head
Specific Capacity per unit Well Area for Discharge from Open Well
Go Specific Capacity = Flow Discharge/(Area of the Well*Depression Head)
Proportionality constant given specific capacity per unit well area of aquifer
Go Proportionality Constant = Area of the Well*Specific Capacity
Area of well given specific capacity per unit well area of aquifer
Go Area of the Well = Proportionality Constant/Specific Capacity

Area of well given specific capacity per unit well area of aquifer Formula

Area of the Well = Proportionality Constant/Specific Capacity
A = K0/Ks

What is Groundwater Recharge?

Groundwater Recharge or deep drainage or deep percolation is a hydrologic process, where water moves downward from surface water to groundwater. Recharge is the primary method through which water enters an aquifer.

How to Calculate Area of well given specific capacity per unit well area of aquifer?

Area of well given specific capacity per unit well area of aquifer calculator uses Area of the Well = Proportionality Constant/Specific Capacity to calculate the Area of the Well, Area of well given specific capacity per unit well area of aquifer is space created by corrugated metal or concrete barrier walls installed around well unit to hold back earth. Area of the Well is denoted by A symbol.

How to calculate Area of well given specific capacity per unit well area of aquifer using this online calculator? To use this online calculator for Area of well given specific capacity per unit well area of aquifer, enter Proportionality Constant (K0) & Specific Capacity (Ks) and hit the calculate button. Here is how the Area of well given specific capacity per unit well area of aquifer calculation can be explained with given input values -> 5.713333 = 4.285/0.75.

FAQ

What is Area of well given specific capacity per unit well area of aquifer?
Area of well given specific capacity per unit well area of aquifer is space created by corrugated metal or concrete barrier walls installed around well unit to hold back earth and is represented as A = K0/Ks or Area of the Well = Proportionality Constant/Specific Capacity. The proportionality constant depends upon the characteristics of the aquifer and the area of the well. It represents discharge per unit drawdown also called specific capacity of well & Specific Capacity is the amount of water furnished under a standard unit head.
How to calculate Area of well given specific capacity per unit well area of aquifer?
Area of well given specific capacity per unit well area of aquifer is space created by corrugated metal or concrete barrier walls installed around well unit to hold back earth is calculated using Area of the Well = Proportionality Constant/Specific Capacity. To calculate Area of well given specific capacity per unit well area of aquifer, you need Proportionality Constant (K0) & Specific Capacity (Ks). With our tool, you need to enter the respective value for Proportionality Constant & Specific Capacity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Area of the Well?
In this formula, Area of the Well uses Proportionality Constant & Specific Capacity. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Area of the Well = Proportionality Constant*Time Interval/ln(Drawdown at the Start of Recuperation/Drawdown at a Time)
  • Area of the Well = Yield from an open well/(Specific Capacity*Depression Head)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!