Average Hysteresis Power Loss Calculator

✖Hysteresis constant is defined as a constant that represents hysteresis loss when a magnetic material is operating in the Rayleigh region.ⓘ Hysteresis Constant [K_h]			+10% -10%
✖Frequency is defined as the frequency which is needed to avoid the saturation.ⓘ Frequency [f]			+10% -10%
✖Magnetic flux density is equal to the magnetic field strength times the absolute permeability of the region where the field exists. Magnetic flux density formula, B=μH.ⓘ Magnetic Flux Density [B]			+10% -10%
✖Steinmetz Coefficient is defined as a constant which is used in calculating the hysteresis losses. Its value varies from material to material.ⓘ Steinmetz Coefficient [n]			+10% -10%

✖Hysteresis loss is defined as the energy entrapped in magnetic materials exposed to a magnetic field in the form of residual magnetization.ⓘ Average Hysteresis Power Loss [P_hystersis]

⎘ Copy

👎

Formula

✖

Average Hysteresis Power Loss

Formula

`"P"_{"hystersis"} = "K"_{"h"}*"f"*"B"^"n"`

Example

`"2.523697W"="2.13J/m³"*"15.56Hz"*("0.2T")^"1.6"`

Calculator

LaTeX

Reset

👍

Download Magnetic Circuit Formulas PDF PDF Image

Average Hysteresis Power Loss Solution

STEP 0: Pre-Calculation Summary

Formula Used

Hysteresis Loss = Hysteresis Constant*Frequency*Magnetic Flux Density^Steinmetz Coefficient
P_hystersis = K_h*f*B^n
This formula uses 5 Variables

Variables Used

Hysteresis Loss - (Measured in Watt) - Hysteresis loss is defined as the energy entrapped in magnetic materials exposed to a magnetic field in the form of residual magnetization.
Hysteresis Constant - (Measured in Joule per Cubic Meter) - Hysteresis constant is defined as a constant that represents hysteresis loss when a magnetic material is operating in the Rayleigh region.
Frequency - (Measured in Hertz) - Frequency is defined as the frequency which is needed to avoid the saturation.
Magnetic Flux Density - (Measured in Tesla) - Magnetic flux density is equal to the magnetic field strength times the absolute permeability of the region where the field exists. Magnetic flux density formula, B=μH.
Steinmetz Coefficient - Steinmetz Coefficient is defined as a constant which is used in calculating the hysteresis losses. Its value varies from material to material.

STEP 1: Convert Input(s) to Base Unit

Hysteresis Constant: 2.13 Joule per Cubic Meter --> 2.13 Joule per Cubic Meter No Conversion Required
Frequency: 15.56 Hertz --> 15.56 Hertz No Conversion Required
Magnetic Flux Density: 0.2 Tesla --> 0.2 Tesla No Conversion Required
Steinmetz Coefficient: 1.6 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_hystersis = K_h*f*B^n --> 2.13*15.56*0.2^1.6

Evaluating ... ...

P_hystersis = 2.5236968704029

STEP 3: Convert Result to Output's Unit

2.5236968704029 Watt --> No Conversion Required

FINAL ANSWER

2.5236968704029 ≈ 2.523697 Watt <-- Hysteresis Loss

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Electrical Circuit » Magnetic Circuit » Magnetic Specifications » Average Hysteresis Power Loss

Credits

Created by Parminder Singh

Chandigarh University (CU), Punjab

Parminder Singh has created this Calculator and 100+ more calculators!

Verified by Aman Dhussawat

GURU TEGH BAHADUR INSTITUTE OF TECHNOLOGY (GTBIT), NEW DELHI

Aman Dhussawat has verified this Calculator and 100+ more calculators!

< 14 Magnetic Specifications Calculators

Mutual Inductance

Go Mutual Inductance = ([Permeability-vacuum]*Relative Permeability*Area of Coil*Number of Conductors*Secondary Turns of Coil)/Mean Length

Flux Density in Toroidal Core

Go Magnetic Flux Density = (Relative Permeability*Secondary Turns of Coil*Coil Current)/(pi*Coil Inner Diameter)

Magnetic Potential

Go Magnetic Potential = (Magnetic Moment)/(4*pi*[Permeability-vacuum]*Relative Permeability*Pole Distance)

Average Hysteresis Power Loss

Go Hysteresis Loss = Hysteresis Constant*Frequency*Magnetic Flux Density^Steinmetz Coefficient

Reluctance

Go Reluctance = Mean Length/(Magnetic Permeability of a Medium*Area of Coil)

Self Inductance

Go Self Inductance = (Number of Conductors*Magnetic Flux)/Coil Current

Magnetic Flux Density using Magnetic Field Intensity

Go Magnetic Flux Density = Magnetic Permeability of a Medium*Magnetic Field Intensity

Magnetic Susceptibility

Go Magnetic Susceptibility = Intensity of Magnetization/Magnetic Field Intensity

Intensity of Magnetization

Go Intensity of Magnetization = Magnetic Moment/Volume

Magnetic Flux using Flux Density

Go Magnetic Flux = Magnetic Flux Density*Area of Coil

Magnetic Flux Density

Go Magnetic Flux Density = Magnetic Flux/Area of Coil

Magnetic Field Strength

Go Magnetic Field Strength = Force/Magnetic Moment

Magnetic Flux in Core

Go Magnetic Flux = Magnetomotive Force/Reluctance

Permeance

Go Magnetic Permeance = 1/Reluctance

Average Hysteresis Power Loss Formula

Hysteresis Loss = Hysteresis Constant*Frequency*Magnetic Flux Density^Steinmetz Coefficient
P_hystersis = K_h*f*B^n

Hysteresis Loss and Eddy Current Loss: What's the Difference?

Hysteresis loss is caused by the magnetization and demagnetization of the core as current flows in the forward and reverse directions. As the magnetizing force (current) increases, the magnetic flux increases. But when the magnetizing force (current) is decreased, the magnetic flux doesn’t decrease at the same rate, but less gradually.
Eddy current losses are the result of Farady’s law, which states that, “Any change in the environment of a coil of wire will cause a voltage to be induced in the coil, regardless of how the magnetic change is produced.”

How to Calculate Average Hysteresis Power Loss?

Average Hysteresis Power Loss calculator uses Hysteresis Loss = Hysteresis Constant*Frequency*Magnetic Flux Density^Steinmetz Coefficient to calculate the Hysteresis Loss, The Average Hysteresis Power Loss formula is defined as the energy entrapped in magnetic materials exposed to a magnetic field in the form of residual magnetization. Hysteresis Loss is denoted by P_hystersis symbol.

How to calculate Average Hysteresis Power Loss using this online calculator? To use this online calculator for Average Hysteresis Power Loss, enter Hysteresis Constant (K_h), Frequency (f), Magnetic Flux Density (B) & Steinmetz Coefficient (n) and hit the calculate button. Here is how the Average Hysteresis Power Loss calculation can be explained with given input values -> 2.523697 = 2.13*15.56*0.2^1.6.

FAQ

What is Average Hysteresis Power Loss?

The Average Hysteresis Power Loss formula is defined as the energy entrapped in magnetic materials exposed to a magnetic field in the form of residual magnetization and is represented as P_hystersis = K_h*f*B^n or Hysteresis Loss = Hysteresis Constant*Frequency*Magnetic Flux Density^Steinmetz Coefficient. Hysteresis constant is defined as a constant that represents hysteresis loss when a magnetic material is operating in the Rayleigh region, Frequency is defined as the frequency which is needed to avoid the saturation, Magnetic flux density is equal to the magnetic field strength times the absolute permeability of the region where the field exists. Magnetic flux density formula, B=μH & Steinmetz Coefficient is defined as a constant which is used in calculating the hysteresis losses. Its value varies from material to material.

How to calculate Average Hysteresis Power Loss?

The Average Hysteresis Power Loss formula is defined as the energy entrapped in magnetic materials exposed to a magnetic field in the form of residual magnetization is calculated using Hysteresis Loss = Hysteresis Constant*Frequency*Magnetic Flux Density^Steinmetz Coefficient. To calculate Average Hysteresis Power Loss, you need Hysteresis Constant (K_h), Frequency (f), Magnetic Flux Density (B) & Steinmetz Coefficient (n). With our tool, you need to enter the respective value for Hysteresis Constant, Frequency, Magnetic Flux Density & Steinmetz Coefficient and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search