Average Outflow Denoting Beginning and End of Time Interval Solution

STEP 0: Pre-Calculation Summary
Formula Used
Average Outflow = (Outflow at the Beginning of Time Interval+Outflow at the End of Time Interval)/2
Qavg = (Q1+Q2)/2
This formula uses 3 Variables
Variables Used
Average Outflow - (Measured in Cubic Meter per Second) - Average Outflow during the time interval is the removal of water from the hydrological cycle. It can also refer to the measure of the average volume of outgoing water per unit of time.
Outflow at the Beginning of Time Interval - (Measured in Cubic Meter per Second) - Outflow at the Beginning of Time Interval is the removal of water from the hydrological cycle at the start of the time.
Outflow at the End of Time Interval - (Measured in Cubic Meter per Second) - Outflow at the End of Time Interval is the removal of water from the hydrological cycle at the end of the time.
STEP 1: Convert Input(s) to Base Unit
Outflow at the Beginning of Time Interval: 48 Cubic Meter per Second --> 48 Cubic Meter per Second No Conversion Required
Outflow at the End of Time Interval: 64 Cubic Meter per Second --> 64 Cubic Meter per Second No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Qavg = (Q1+Q2)/2 --> (48+64)/2
Evaluating ... ...
Qavg = 56
STEP 3: Convert Result to Output's Unit
56 Cubic Meter per Second --> No Conversion Required
FINAL ANSWER
56 Cubic Meter per Second <-- Average Outflow
(Calculation completed in 00.004 seconds)

Credits

Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verified by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has verified this Calculator and 1700+ more calculators!

16 Basic Equations of Flood Routing Calculators

Storage at End of Time Interval of Reservoir
Go Storage at the End of Time Interval = Storage at the Beginning of Time Interval+((Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2)*Time Interval-((Outflow at the Beginning of Time Interval+Outflow at the End of Time Interval)/2)*Time Interval
Change in Storage Denoting Beginning and End of Time Interval concerning Inflow and Outflow
Go Change in Storage Volumes = ((Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2)*Time Interval-((Outflow at the Beginning of Time Interval+Outflow at the End of Time Interval)/2)*Time Interval
Average Outflow in Time given Change in Storage
Go Average Outflow = (Average Inflow*Time Interval-Change in Storage Volumes)/Time Interval
Average Inflow given Change in Storage
Go Average Inflow = (Change in Storage Volumes+Average Outflow*Time Interval)/Time Interval
Change in Storage Denoting Beginning and End of Time Interval
Go Change in Storage Volumes = Storage at the End of Time Interval-Storage at the Beginning of Time Interval
Storage at Beginning of Time Interval
Go Storage at the Beginning of Time Interval = Storage at the End of Time Interval-Change in Storage Volumes
Storage at End of Time Interval
Go Storage at the End of Time Interval = Change in Storage Volumes+Storage at the Beginning of Time Interval
Average Outflow Denoting Beginning and End of Time Interval
Go Average Outflow = (Outflow at the Beginning of Time Interval+Outflow at the End of Time Interval)/2
Outflow at Beginning of Time Interval given Average Inflow
Go Outflow at the Beginning of Time Interval = 2*Average Outflow-Outflow at the End of Time Interval
Outflow at End of Time Interval given Average Inflow
Go Outflow at the End of Time Interval = 2*Average Outflow-Outflow at the Beginning of Time Interval
Average Inflow Denoting at Beginning and End of Time Interval
Go Average Inflow = (Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2
Inflow at Beginning of Time Interval given Average Inflow
Go Inflow at the Beginning of Time Interval = 2*Average Inflow-Inflow at the End of Time Interval
Inflow at End of Time Interval given Average Inflow
Go Inflow at the End of Time Interval = 2*Average Inflow-Inflow at the Beginning of Time Interval
Outflow Rate given Rate of Change of Storage
Go Outflow Rate = Inflow Rate-Rate of Change of Storage
Inflow Rate given Rate of Change of Storage
Go Inflow Rate = Rate of Change of Storage+Outflow Rate
Rate of Change of Storage
Go Rate of Change of Storage = Inflow Rate-Outflow Rate

Average Outflow Denoting Beginning and End of Time Interval Formula

Average Outflow = (Outflow at the Beginning of Time Interval+Outflow at the End of Time Interval)/2
Qavg = (Q1+Q2)/2

What is Flood Routing?

Flood routing is a procedure to determine the time and magnitude of flow (i.e., the flow hydrograph) at a point on a watercourse from known or assumed hydrographs at one or more points upstream. The procedure is specifically known as flood routing if the flow is a flood.

How to Calculate Average Outflow Denoting Beginning and End of Time Interval?

Average Outflow Denoting Beginning and End of Time Interval calculator uses Average Outflow = (Outflow at the Beginning of Time Interval+Outflow at the End of Time Interval)/2 to calculate the Average Outflow, The Average Outflow Denoting Beginning and End of Time Interval formula is defined as the groundwater discharge to surface water bodies, evapotranspiration, pumping, spring flow, discharge through seepage faces along hillslopes, and any other losses of water from the system. Average Outflow is denoted by Qavg symbol.

How to calculate Average Outflow Denoting Beginning and End of Time Interval using this online calculator? To use this online calculator for Average Outflow Denoting Beginning and End of Time Interval, enter Outflow at the Beginning of Time Interval (Q1) & Outflow at the End of Time Interval (Q2) and hit the calculate button. Here is how the Average Outflow Denoting Beginning and End of Time Interval calculation can be explained with given input values -> 46.5 = (48+64)/2.

FAQ

What is Average Outflow Denoting Beginning and End of Time Interval?
The Average Outflow Denoting Beginning and End of Time Interval formula is defined as the groundwater discharge to surface water bodies, evapotranspiration, pumping, spring flow, discharge through seepage faces along hillslopes, and any other losses of water from the system and is represented as Qavg = (Q1+Q2)/2 or Average Outflow = (Outflow at the Beginning of Time Interval+Outflow at the End of Time Interval)/2. Outflow at the Beginning of Time Interval is the removal of water from the hydrological cycle at the start of the time & Outflow at the End of Time Interval is the removal of water from the hydrological cycle at the end of the time.
How to calculate Average Outflow Denoting Beginning and End of Time Interval?
The Average Outflow Denoting Beginning and End of Time Interval formula is defined as the groundwater discharge to surface water bodies, evapotranspiration, pumping, spring flow, discharge through seepage faces along hillslopes, and any other losses of water from the system is calculated using Average Outflow = (Outflow at the Beginning of Time Interval+Outflow at the End of Time Interval)/2. To calculate Average Outflow Denoting Beginning and End of Time Interval, you need Outflow at the Beginning of Time Interval (Q1) & Outflow at the End of Time Interval (Q2). With our tool, you need to enter the respective value for Outflow at the Beginning of Time Interval & Outflow at the End of Time Interval and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Average Outflow?
In this formula, Average Outflow uses Outflow at the Beginning of Time Interval & Outflow at the End of Time Interval. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Average Outflow = (Average Inflow*Time Interval-Change in Storage Volumes)/Time Interval
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!