Bearing Capacity Factor Dependent on Surcharge given Unit Weight Bearing Capacity Factor Solution

STEP 0: Pre-Calculation Summary
Formula Used
Bearing Capacity Factor dependent on Surcharge = (Bearing Capacity Factor dependent on Unit Weight/tan(1.4*Angle of Internal Friction))+1
Nq = (Nγ/tan(1.4*φ))+1
This formula uses 1 Functions, 3 Variables
Functions Used
tan - The tangent of an angle is a trigonometric ratio of the length of the side opposite an angle to the length of the side adjacent to an angle in a right triangle., tan(Angle)
Variables Used
Bearing Capacity Factor dependent on Surcharge - Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.
Bearing Capacity Factor dependent on Unit Weight - Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.
Angle of Internal Friction - (Measured in Radian) - Angle of Internal Friction is the angle measured between the normal force and resultant force .
STEP 1: Convert Input(s) to Base Unit
Bearing Capacity Factor dependent on Unit Weight: 1.6 --> No Conversion Required
Angle of Internal Friction: 46 Degree --> 0.802851455917241 Radian (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Nq = (Nγ/tan(1.4*φ))+1 --> (1.6/tan(1.4*0.802851455917241))+1
Evaluating ... ...
Nq = 1.76659155424273
STEP 3: Convert Result to Output's Unit
1.76659155424273 --> No Conversion Required
FINAL ANSWER
1.76659155424273 1.766592 <-- Bearing Capacity Factor dependent on Surcharge
(Calculation completed in 00.004 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

8 Bearing Capacity of Soils: Meyerhof's Analysis Calculators

Bearing Capacity Factor Dependent on Surcharge given Angle of Internal Friction
Go Bearing Capacity Factor dependent on Surcharge = (exp(pi*tan((Angle of Internal Friction*pi)/180)))*(tan(((45+(Angle of Internal Friction/2))*pi)/180))^2
Bearing Capacity Factor Dependent on Unit Weight Given Angle of Internal Friction
Go Bearing Capacity Factor dependent on Unit Weight = (Bearing Capacity Factor dependent on Surcharge-1)*tan(1.4*(Angle of Internal Friction))
Angle of Internal Friction given Bearing Capacity Factors
Go Angle of Internal Friction = atan(Bearing Capacity Factor dependent on Unit Weight/(Bearing Capacity Factor dependent on Surcharge-1))/1.4
Bearing Capacity Factor Dependent on Surcharge given Unit Weight Bearing Capacity Factor
Go Bearing Capacity Factor dependent on Surcharge = (Bearing Capacity Factor dependent on Unit Weight/tan(1.4*Angle of Internal Friction))+1
Length of Footing given Angle of Shearing Resistance by Meyerhof's Analysis
Go Length of Footing = (0.1*Width of Footing)/(1.1-(Angle of Internal Friction For Plain Strain/Angle of Internal Friction))
Width of Footing given Angle of Shearing Resistance by Meyerhof's Analysis
Go Width of Footing = (1.1-(Angle of Internal Friction For Plain Strain/Angle of Internal Friction))*(Length of Footing/0.1)
Plane Strain Angle of Shearing Resistance by Meyerhof's Analysis
Go Angle of Internal Friction For Plain Strain = (1.1-0.1*(Width of Footing/Length of Footing))*Angle of Internal Friction
Triaxial Angle of Shearing Resistance by Meyerhof's Analysis
Go Angle of Internal Friction = Angle of Internal Friction For Plain Strain/(1.1-0.1*(Width of Footing/Length of Footing))

Bearing Capacity Factor Dependent on Surcharge given Unit Weight Bearing Capacity Factor Formula

Bearing Capacity Factor dependent on Surcharge = (Bearing Capacity Factor dependent on Unit Weight/tan(1.4*Angle of Internal Friction))+1
Nq = (Nγ/tan(1.4*φ))+1

What is Bearing Capacity Factor?

Bearing capacity factors are empirically derived factors used in a bearing capacity equation that usually correlates with the angle of internal friction of the soil. See the bearing capacity technical guidance for equations and detailed calculations for applying the following bearing capacity factors.

How to Calculate Bearing Capacity Factor Dependent on Surcharge given Unit Weight Bearing Capacity Factor?

Bearing Capacity Factor Dependent on Surcharge given Unit Weight Bearing Capacity Factor calculator uses Bearing Capacity Factor dependent on Surcharge = (Bearing Capacity Factor dependent on Unit Weight/tan(1.4*Angle of Internal Friction))+1 to calculate the Bearing Capacity Factor dependent on Surcharge, The Bearing Capacity Factor Dependent on Surcharge given Unit Weight Bearing Capacity Factor is defined as the value of bearing capacity factor dependent on surcharge when we have prior information of other parameters used. Bearing Capacity Factor dependent on Surcharge is denoted by Nq symbol.

How to calculate Bearing Capacity Factor Dependent on Surcharge given Unit Weight Bearing Capacity Factor using this online calculator? To use this online calculator for Bearing Capacity Factor Dependent on Surcharge given Unit Weight Bearing Capacity Factor, enter Bearing Capacity Factor dependent on Unit Weight (Nγ) & Angle of Internal Friction (φ) and hit the calculate button. Here is how the Bearing Capacity Factor Dependent on Surcharge given Unit Weight Bearing Capacity Factor calculation can be explained with given input values -> 1.766592 = (1.6/tan(1.4*0.802851455917241))+1.

FAQ

What is Bearing Capacity Factor Dependent on Surcharge given Unit Weight Bearing Capacity Factor?
The Bearing Capacity Factor Dependent on Surcharge given Unit Weight Bearing Capacity Factor is defined as the value of bearing capacity factor dependent on surcharge when we have prior information of other parameters used and is represented as Nq = (Nγ/tan(1.4*φ))+1 or Bearing Capacity Factor dependent on Surcharge = (Bearing Capacity Factor dependent on Unit Weight/tan(1.4*Angle of Internal Friction))+1. Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil & Angle of Internal Friction is the angle measured between the normal force and resultant force .
How to calculate Bearing Capacity Factor Dependent on Surcharge given Unit Weight Bearing Capacity Factor?
The Bearing Capacity Factor Dependent on Surcharge given Unit Weight Bearing Capacity Factor is defined as the value of bearing capacity factor dependent on surcharge when we have prior information of other parameters used is calculated using Bearing Capacity Factor dependent on Surcharge = (Bearing Capacity Factor dependent on Unit Weight/tan(1.4*Angle of Internal Friction))+1. To calculate Bearing Capacity Factor Dependent on Surcharge given Unit Weight Bearing Capacity Factor, you need Bearing Capacity Factor dependent on Unit Weight (Nγ) & Angle of Internal Friction (φ). With our tool, you need to enter the respective value for Bearing Capacity Factor dependent on Unit Weight & Angle of Internal Friction and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Bearing Capacity Factor dependent on Surcharge?
In this formula, Bearing Capacity Factor dependent on Surcharge uses Bearing Capacity Factor dependent on Unit Weight & Angle of Internal Friction. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Bearing Capacity Factor dependent on Surcharge = (exp(pi*tan((Angle of Internal Friction*pi)/180)))*(tan(((45+(Angle of Internal Friction/2))*pi)/180))^2
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!