Boiling Point using Trouton's Rule given Latent Heat Solution

STEP 0: Pre-Calculation Summary
Formula Used
Boiling Point = Latent Heat/(10.5*[R])
bp = LH/(10.5*[R])
This formula uses 1 Constants, 2 Variables
Constants Used
[R] - Universal gas constant Value Taken As 8.31446261815324
Variables Used
Boiling Point - (Measured in Kelvin) - Boiling Point is the temperature at which a liquid starts to boil and transforms to vapor.
Latent Heat - (Measured in Joule) - Latent Heat is the heat that increases the specific humidity without a change in temperature.
STEP 1: Convert Input(s) to Base Unit
Latent Heat: 25020.7 Joule --> 25020.7 Joule No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
bp = LH/(10.5*[R]) --> 25020.7/(10.5*[R])
Evaluating ... ...
bp = 286.599858458813
STEP 3: Convert Result to Output's Unit
286.599858458813 Kelvin --> No Conversion Required
FINAL ANSWER
286.599858458813 286.5999 Kelvin <-- Boiling Point
(Calculation completed in 00.004 seconds)

Credits

Created by Prerana Bakli
University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA
Prerana Bakli has created this Calculator and 800+ more calculators!
Verified by Akshada Kulkarni
National Institute of Information Technology (NIIT), Neemrana
Akshada Kulkarni has verified this Calculator and 900+ more calculators!

20 Clausius-Clapeyron Equation Calculators

Specific Latent Heat using Integrated Form of Clausius-Clapeyron Equation
Go Specific Latent Heat = (-ln(Final Pressure of System/Initial Pressure of System)*[R])/(((1/Final Temperature)-(1/Initial Temperature))*Molecular Weight)
Enthalpy using Integrated Form of Clausius-Clapeyron Equation
Go Change in Enthalpy = (-ln(Final Pressure of System/Initial Pressure of System)*[R])/((1/Final Temperature)-(1/Initial Temperature))
Initial Pressure using Integrated Form of Clausius-Clapeyron Equation
Go Initial Pressure of System = Final Pressure of System/(exp(-(Latent Heat*((1/Final Temperature)-(1/Initial Temperature)))/[R]))
Final Pressure using Integrated Form of Clausius-Clapeyron Equation
Go Final Pressure of System = (exp(-(Latent Heat*((1/Final Temperature)-(1/Initial Temperature)))/[R]))*Initial Pressure of System
Final Temperature using Integrated Form of Clausius-Clapeyron Equation
Go Final Temperature = 1/((-(ln(Final Pressure of System/Initial Pressure of System)*[R])/Latent Heat)+(1/Initial Temperature))
Initial Temperature using Integrated Form of Clausius-Clapeyron Equation
Go Initial Temperature = 1/(((ln(Final Pressure of System/Initial Pressure of System)*[R])/Latent Heat)+(1/Final Temperature))
Change in Pressure using Clausius Equation
Go Change in Pressure = (Change in Temperature*Molal Heat of Vaporization)/((Molar Volume-Molal Liquid Volume)*Absolute Temperature)
Temperature in Evaporation of Water near Standard Temperature and Pressure
Go Temperature = sqrt((Specific Latent Heat*Saturation Vapor Pressure)/(Slope of Co-existence Curve of Water Vapor*[R]))
Ratio of Vapour Pressure using Integrated Form of Clausius-Clapeyron Equation
Go Ratio of Vapor Pressure = exp(-(Latent Heat*((1/Final Temperature)-(1/Initial Temperature)))/[R])
Specific Latent Heat of Evaporation of Water near Standard Temperature and Pressure
Go Specific Latent Heat = (Slope of Co-existence Curve of Water Vapor*[R]*(Temperature^2))/Saturation Vapor Pressure
Saturation Vapor Pressure near Standard Temperature and Pressure
Go Saturation Vapor Pressure = (Slope of Co-existence Curve of Water Vapor*[R]*(Temperature^2))/Specific Latent Heat
Temperature for Transitions
Go Temperature = -Latent Heat/((ln(Pressure)-Integration Constant)* [R])
Pressure for Transitions between Gas and Condensed Phase
Go Pressure = exp(-Latent Heat/([R]*Temperature))+Integration Constant
August Roche Magnus Formula
Go Saturation Vapour Pressure = 6.1094*exp((17.625*Temperature)/(Temperature+243.04))
Entropy of Vaporization using Trouton's Rule
Go Entropy = (4.5*[R])+([R]*ln(Temperature))
Boiling Point using Trouton's Rule given Specific Latent Heat
Go Boiling Point = (Specific Latent Heat*Molecular Weight)/(10.5*[R])
Specific Latent Heat using Trouton's Rule
Go Specific Latent Heat = (Boiling Point*10.5*[R])/Molecular Weight
Boiling Point using Trouton's Rule given Latent Heat
Go Boiling Point = Latent Heat/(10.5*[R])
Boiling Point given Enthalpy using Trouton's Rule
Go Boiling Point = Enthalpy/(10.5*[R])
Enthalpy of Vaporization using Trouton's Rule
Go Enthalpy = Boiling Point*10.5*[R]

22 Important Formulas of Clausius-Clapeyron Equation Calculators

Specific Latent Heat using Integrated Form of Clausius-Clapeyron Equation
Go Specific Latent Heat = (-ln(Final Pressure of System/Initial Pressure of System)*[R])/(((1/Final Temperature)-(1/Initial Temperature))*Molecular Weight)
Enthalpy using Integrated Form of Clausius-Clapeyron Equation
Go Change in Enthalpy = (-ln(Final Pressure of System/Initial Pressure of System)*[R])/((1/Final Temperature)-(1/Initial Temperature))
Final Pressure using Integrated Form of Clausius-Clapeyron Equation
Go Final Pressure of System = (exp(-(Latent Heat*((1/Final Temperature)-(1/Initial Temperature)))/[R]))*Initial Pressure of System
Final Temperature using Integrated Form of Clausius-Clapeyron Equation
Go Final Temperature = 1/((-(ln(Final Pressure of System/Initial Pressure of System)*[R])/Latent Heat)+(1/Initial Temperature))
Latent Heat using Integrated Form of Clausius-Clapeyron Equation
Go Latent Heat = (-ln(Final Pressure of System/Initial Pressure of System)*[R])/((1/Final Temperature)-(1/Initial Temperature))
Change in Pressure using Clausius Equation
Go Change in Pressure = (Change in Temperature*Molal Heat of Vaporization)/((Molar Volume-Molal Liquid Volume)*Absolute Temperature)
Latent Heat of Evaporation of Water near Standard Temperature and Pressure
Go Latent Heat = ((Slope of Co-existence Curve of Water Vapor*[R]*(Temperature^2))/Saturation Vapor Pressure)*Molecular Weight
Slope of Coexistence Curve of Water Vapor near Standard Temperature and Pressure
Go Slope of Co-existence Curve of Water Vapor = (Specific Latent Heat*Saturation Vapor Pressure)/([R]*(Temperature^2))
Specific Latent Heat of Evaporation of Water near Standard Temperature and Pressure
Go Specific Latent Heat = (Slope of Co-existence Curve of Water Vapor*[R]*(Temperature^2))/Saturation Vapor Pressure
Saturation Vapor Pressure near Standard Temperature and Pressure
Go Saturation Vapor Pressure = (Slope of Co-existence Curve of Water Vapor*[R]*(Temperature^2))/Specific Latent Heat
Latent Heat of Vaporization for Transitions
Go Latent Heat = -(ln(Pressure)-Integration Constant)*[R]*Temperature
Slope of Coexistence Curve given Pressure and Latent Heat
Go Slope of Coexistence Curve = (Pressure*Latent Heat)/((Temperature^2)*[R])
August Roche Magnus Formula
Go Saturation Vapour Pressure = 6.1094*exp((17.625*Temperature)/(Temperature+243.04))
Entropy of Vaporization using Trouton's Rule
Go Entropy = (4.5*[R])+([R]*ln(Temperature))
Slope of Coexistence Curve using Enthalpy
Go Slope of Coexistence Curve = Enthalpy Change/(Temperature*Change in Volume)
Boiling Point using Trouton's Rule given Specific Latent Heat
Go Boiling Point = (Specific Latent Heat*Molecular Weight)/(10.5*[R])
Specific Latent Heat using Trouton's Rule
Go Specific Latent Heat = (Boiling Point*10.5*[R])/Molecular Weight
Slope of Coexistence Curve using Entropy
Go Slope of Coexistence Curve = Change in Entropy/Change in Volume
Boiling Point using Trouton's Rule given Latent Heat
Go Boiling Point = Latent Heat/(10.5*[R])
Latent Heat using Trouton's Rule
Go Latent Heat = Boiling Point*10.5*[R]
Boiling Point given Enthalpy using Trouton's Rule
Go Boiling Point = Enthalpy/(10.5*[R])
Enthalpy of Vaporization using Trouton's Rule
Go Enthalpy = Boiling Point*10.5*[R]

Boiling Point using Trouton's Rule given Latent Heat Formula

Boiling Point = Latent Heat/(10.5*[R])
bp = LH/(10.5*[R])

What does Trouton's Rule state?

Trouton’s rule states that the entropy of vaporization is almost the same value, about 85–88 J K−1 mol−1, for various kinds of liquids at their boiling points. The entropy of vaporization is defined as the ratio between the enthalpy of vaporization and the boiling temperature. It is named after Frederick Thomas Trouton.

How to Calculate Boiling Point using Trouton's Rule given Latent Heat?

Boiling Point using Trouton's Rule given Latent Heat calculator uses Boiling Point = Latent Heat/(10.5*[R]) to calculate the Boiling Point, The Boiling Point using Trouton's Rule given Latent Heat is the temperature at which the vapor pressure of a liquid equals the pressure surrounding the liquid and the liquid changes into a vapor. Boiling Point is denoted by bp symbol.

How to calculate Boiling Point using Trouton's Rule given Latent Heat using this online calculator? To use this online calculator for Boiling Point using Trouton's Rule given Latent Heat, enter Latent Heat (LH) and hit the calculate button. Here is how the Boiling Point using Trouton's Rule given Latent Heat calculation can be explained with given input values -> 284.6045 = 25020.7/(10.5*[R]).

FAQ

What is Boiling Point using Trouton's Rule given Latent Heat?
The Boiling Point using Trouton's Rule given Latent Heat is the temperature at which the vapor pressure of a liquid equals the pressure surrounding the liquid and the liquid changes into a vapor and is represented as bp = LH/(10.5*[R]) or Boiling Point = Latent Heat/(10.5*[R]). Latent Heat is the heat that increases the specific humidity without a change in temperature.
How to calculate Boiling Point using Trouton's Rule given Latent Heat?
The Boiling Point using Trouton's Rule given Latent Heat is the temperature at which the vapor pressure of a liquid equals the pressure surrounding the liquid and the liquid changes into a vapor is calculated using Boiling Point = Latent Heat/(10.5*[R]). To calculate Boiling Point using Trouton's Rule given Latent Heat, you need Latent Heat (LH). With our tool, you need to enter the respective value for Latent Heat and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Boiling Point?
In this formula, Boiling Point uses Latent Heat. We can use 4 other way(s) to calculate the same, which is/are as follows -
  • Boiling Point = Enthalpy/(10.5*[R])
  • Boiling Point = (Specific Latent Heat*Molecular Weight)/(10.5*[R])
  • Boiling Point = Enthalpy/(10.5*[R])
  • Boiling Point = (Specific Latent Heat*Molecular Weight)/(10.5*[R])
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!