What is Bound Moisture?
Bound moisture, on the other hand, is the moisture that is physically or chemically bound to the material and cannot be easily removed by evaporation. Bound moisture is located within the material and is not accessible to the drying medium, such as air. This type of moisture is also known as "structural" or "interstitial" moisture, and can only be removed during the falling rate drying period, when the internal moisture content of the material is reduced.
What is Drying Mass Transfer Operation?
Drying is a mass transfer operation that involves the removal of moisture or other volatile solvents from a solid material. The process of drying is used in a variety of industries, including food processing, pharmaceuticals, chemicals, and textiles. In drying, heat is applied to the material to increase its temperature, which causes the moisture or solvent to evaporate. The evaporated moisture is then removed from the material using a drying medium, such as air, which carries away the moisture as it flows over the surface of the material. There are several types of drying techniques, including convection drying, which uses hot air to remove moisture; radiation drying, which uses infrared radiation to heat the material and remove moisture; and vacuum drying, which removes moisture by creating a low-pressure environment.
How to Calculate Bound Moisture Content based on Unbound Moisture Content?
Bound Moisture Content based on Unbound Moisture Content calculator uses Bound Moisture Content = Initial Moisture Content-Unbound Moisture Content to calculate the Bound Moisture Content, The Bound Moisture Content based on Unbound Moisture Content formula is defined as the moisture bound to the solid as a difference between the initial moisture content of the solid to the unbound moisture content of the solid. Bound Moisture Content is denoted by Xb symbol.
How to calculate Bound Moisture Content based on Unbound Moisture Content using this online calculator? To use this online calculator for Bound Moisture Content based on Unbound Moisture Content, enter Initial Moisture Content (Xi) & Unbound Moisture Content (XUb) and hit the calculate button. Here is how the Bound Moisture Content based on Unbound Moisture Content calculation can be explained with given input values -> 0.2 = 0.48-0.28.