Bulk Modulus Calculator

Category	Engineering ↺
Engineering	Mechanical ↺
Mechanical	Strength of Materials ↺

✖The Bulk Stress is the force acting on the body from all directions causing change in its areaⓘ Bulk Stress [B.S]			+10% -10%
✖The Bulk Strain ist he ratio of the change in the volume of a body that occurs when the body is placed under pressure, to the original volume of the body.ⓘ Bulk Strain [B.S]			+10% -10%

✖The bulk modulus of a substance is a measure of how resistant to compression that substance is. It is defined as the ratio of the infinitesimal pressure increase to the resulting relative decrease of the volume.ⓘ Bulk Modulus [K]

⎘ Copy

Reset

👎 Report Issue!

👍 Share Now!

You are here:

Pragati Jaju

College Of Engineering (COEP), Pune

Pragati Jaju has created this Calculator and 25+ more calculators!

< 2 Other formulas that calculate the same Output

Bulk Modulus When Velocity Of Pressure Wave Is Given

bulk modulus=((velocity of pressure wave)^2)*mass density GO

Bulk Modulus

bulk modulus=Volume Stress/Volume Strain GO

Bulk Modulus Formula

bulk modulus=Bulk Stress/Bulk Strain

More formulas

Young's Modulus GO

Bulk Modulus GO

Factor of Safety GO

Strain Energy Density GO

Shear strength for double parallel fillet weld GO

Shear Stress GO

Bulk Stress GO

Tensile Strain GO

Shear Strain GO

Bulk Strain GO

Elastic Modulus GO

Shear Modulus GO

Brinell Hardness Number GO

Shear Strain GO

Axial elongation of prismatic bar due to external load GO

Elongation of prismatic bar due to its own weight GO

Elongation circular tapered bar GO

Strain energy due to pure shear GO

Strain Energy if moment value is given GO

Strain Energy if Torsion Moment Value is Given GO

Strain Energy if applied tension load is given GO

Deflection of fixed beam with load at center GO

Hooke's law GO

Poisson's Ratio GO

Longitudinal strain GO

Lateral Strain GO

Volumetric Strain GO

Deflection of fixed beam with uniformly distributed load GO

Stress due to gradual loading GO

Stress due to sudden loading GO

Stress due to impact loading GO

Thermal Stress GO

Thermal Stress in tapered bar GO

Section Modulus GO

Shearing Stress GO

Maximum Shearing Stress GO

Shear Stress of Circular Beam GO

Direct Stress GO

Bending Stress GO

Torsional Shear Stress GO

Equivalent Torsional Moment GO

Equivalent Bending Moment GO

Slenderness Ratio GO

Rankine's Formula for Columns GO

Total Angle of Twist GO

Moment of Inertia about Polar Axis GO

Moment of Inertia for Hollow Circular Shaft GO

Strain Energy in Torsion GO

Strain Energy due to Torsion in Hollow Shaft GO

Strain Energy in Torsion for Solid Shaft GO

What is Bulk Modulus?

Bulk Modulus is the relative change in the volume of a body produced by a unit compressive or tensile stress acting uniformly over its surface.

How to Calculate Bulk Modulus?

Bulk Modulus calculator uses bulk modulus=Bulk Stress/Bulk Strain to calculate the bulk modulus, The Bulk Modulus is the relative change in the volume of a body produced by a unit compressive or tensile stress acting uniformly over its surface. bulk modulus and is denoted by K symbol.

How to calculate Bulk Modulus using this online calculator? To use this online calculator for Bulk Modulus, enter Bulk Stress (B.S) and Bulk Strain (B.S) and hit the calculate button. Here is how the Bulk Modulus calculation can be explained with given input values -> 1 = 50/50.

FAQ

What is Bulk Modulus?

The Bulk Modulus is the relative change in the volume of a body produced by a unit compressive or tensile stress acting uniformly over its surface and is represented as K=B.S/B.S or bulk modulus=Bulk Stress/Bulk Strain. The Bulk Stress is the force acting on the body from all directions causing change in its area and The Bulk Strain ist he ratio of the change in the volume of a body that occurs when the body is placed under pressure, to the original volume of the body.

How to calculate Bulk Modulus?

The Bulk Modulus is the relative change in the volume of a body produced by a unit compressive or tensile stress acting uniformly over its surface is calculated using bulk modulus=Bulk Stress/Bulk Strain. To calculate Bulk Modulus, you need Bulk Stress (B.S) and Bulk Strain (B.S). With our tool, you need to enter the respective value for Bulk Stress and Bulk Strain and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate bulk modulus?

In this formula, bulk modulus uses Bulk Stress and Bulk Strain. We can use 2 other way(s) to calculate the same, which is/are as follows -

bulk modulus=Volume Stress/Volume Strain
bulk modulus=((velocity of pressure wave)^2)*mass density

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!