🔍
🔍

## Credits

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat
Shobhit Dimri has created this Calculator and 500+ more calculators!
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1000+ more calculators!

## Capacitor dynamic power Solution

STEP 0: Pre-Calculation Summary
Formula Used
dynamic_power = Drain Voltage^2*frequency*Capacitance
Pdynamic = vds^2*f*C
This formula uses 3 Variables
Variables Used
Drain Voltage - Drain Voltage is the voltage that falls across the gate-source terminal of the transistor. (Measured in Volt)
frequency - Frequency refers to the number of occurrences of a periodic event per time and is measured in cycles/second. (Measured in Cycle per Second)
Capacitance - Capacitance is the ratio of the amount of electric charge stored on a conductor to a difference in electric potential. (Measured in Farad)
STEP 1: Convert Input(s) to Base Unit
Drain Voltage: 8 Volt --> 8 Volt No Conversion Required
frequency: 90 Cycle per Second --> 90 Hertz (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Pdynamic = vds^2*f*C --> 8^2*90*3
Evaluating ... ...
Pdynamic = 17280
STEP 3: Convert Result to Output's Unit
17280 Watt --> No Conversion Required
17280 Watt <-- dynamic power
(Calculation completed in 00.009 seconds)

## < 10+ CMOS-VLSI Design Calculators

Drain Voltage
drain_voltage = sqrt(dynamic power/frequency*Capacitance) Go
Gate to Channel Voltage
gate_to_channel_voltage = (Channel Charge/Gate Capacitance)+Threshold voltage Go
Threshold Voltage
threshold_voltage = Gate to Channel Voltage-(Channel Charge/Gate Capacitance) Go
Gate Capacitance
channel_charge = Gate Capacitance*(Gate to Channel Voltage-Threshold voltage) Go
Channel Charge
channel_charge = Gate Capacitance*(Gate to Channel Voltage-Threshold voltage) Go
Capacitor dynamic power
dynamic_power = Drain Voltage^2*frequency*Capacitance Go
Potential gate to Collector
potential_gate_to_collector = (Potential Gate to Source+Potential Gate to Drain)/2 Go
Potential Gate to Drain
potential_gate_to_drain = 2*potential gate to collector-Potential Gate to Source Go
Static Current
static_current = Static power/Drain Voltage Go
Static Power Dissipation
static_power = static current*Drain Voltage Go

### Capacitor dynamic power Formula

dynamic_power = Drain Voltage^2*frequency*Capacitance
Pdynamic = vds^2*f*C

## Explain how logical gates are controlled by Boolean logic?

In Boolean algebra, the true state is denoted by the number one, referred as logic one or logic high. While, the false state is represented by the number zero, called logic zero or logic low.

## How to Calculate Capacitor dynamic power?

Capacitor dynamic power calculator uses dynamic_power = Drain Voltage^2*frequency*Capacitance to calculate the dynamic power, The Capacitor dynamic power formula is defined as consumption of a CMOS IC is calculated by adding the transient power consumption (PT), and capacitive-load power consumption (PL). dynamic power and is denoted by Pdynamic symbol.

How to calculate Capacitor dynamic power using this online calculator? To use this online calculator for Capacitor dynamic power, enter Drain Voltage (vds), frequency (f) and Capacitance (C) and hit the calculate button. Here is how the Capacitor dynamic power calculation can be explained with given input values -> 17280 = 8^2*90*3.

### FAQ

What is Capacitor dynamic power?
The Capacitor dynamic power formula is defined as consumption of a CMOS IC is calculated by adding the transient power consumption (PT), and capacitive-load power consumption (PL) and is represented as Pdynamic = vds^2*f*C or dynamic_power = Drain Voltage^2*frequency*Capacitance. Drain Voltage is the voltage that falls across the gate-source terminal of the transistor, Frequency refers to the number of occurrences of a periodic event per time and is measured in cycles/second and Capacitance is the ratio of the amount of electric charge stored on a conductor to a difference in electric potential.
How to calculate Capacitor dynamic power?
The Capacitor dynamic power formula is defined as consumption of a CMOS IC is calculated by adding the transient power consumption (PT), and capacitive-load power consumption (PL) is calculated using dynamic_power = Drain Voltage^2*frequency*Capacitance. To calculate Capacitor dynamic power, you need Drain Voltage (vds), frequency (f) and Capacitance (C). With our tool, you need to enter the respective value for Drain Voltage, frequency and Capacitance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate dynamic power?
In this formula, dynamic power uses Drain Voltage, frequency and Capacitance. We can use 10 other way(s) to calculate the same, which is/are as follows -
• dynamic_power = Drain Voltage^2*frequency*Capacitance
• drain_voltage = sqrt(dynamic power/frequency*Capacitance)
• static_power = static current*Drain Voltage
• static_current = Static power/Drain Voltage
• channel_charge = Gate Capacitance*(Gate to Channel Voltage-Threshold voltage)
• channel_charge = Gate Capacitance*(Gate to Channel Voltage-Threshold voltage)
• gate_to_channel_voltage = (Channel Charge/Gate Capacitance)+Threshold voltage
• threshold_voltage = Gate to Channel Voltage-(Channel Charge/Gate Capacitance)
• potential_gate_to_collector = (Potential Gate to Source+Potential Gate to Drain)/2
• potential_gate_to_drain = 2*potential gate to collector-Potential Gate to Source
Where is the Capacitor dynamic power calculator used?
Among many, Capacitor dynamic power calculator is widely used in real life applications like {FormulaUses}. Here are few more real life examples -
{FormulaExamplesList}
Let Others Know