Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has created this Calculator and 100+ more calculators!
Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 400+ more calculators!

7 Other formulas that you can solve using the same Inputs

Flange Thickness for H shaped Columns
Flange thickness of H shaped columns=0.25*(Column depth+Width of Flange)-0.25*(sqrt((Column depth+Width of Flange)^2-((4*Column load)/Allowable bearing stress))) GO
Allowable Bearing Pressure When Flange Thickness for H shaped Column is Given
Allowable bearing stress=4*Column load/((Column depth+Width of Flange)^2-(-4*Flange thickness of H shaped columns+Column depth+Width of Flange)^2) GO
Plate Length
Length of plate=sqrt(Area required by base plate)+(0.5*((0.95*Column depth)-(0.80*Width of Flange))) GO
Maximum Unsupported Length of Compression Flange-1
Maximum unsupported length=76.0*Width of Flange/sqrt(minimum specified yield stress of steel) GO
Column Flange Width When Plate Length is Given
Width of Flange=1.1875*Column depth-(2.5*(Length of plate-sqrt(Area required by base plate))) GO
Column Load if Area Required by the Base Plate is Given
Column load=Area required by base plate*0.7*Specified compressive strength of concrete GO
Equivalent Cantilever Dimension
Equivalent Cantilever Dimension=(1/4)*sqrt(Depth of Section of Column*Width of Flange) GO

Column Depth When Plate Length is Given Formula

Column depth=(Width of Flange+(2.5*(Length of plate-sqrt(Area required by base plate))))/1.1875
d=(b<sub>f+(2.5*(N-sqrt(A<sub>1</sub>))))/1.1875
More formulas
Area Required by the Base Plate GO
Column Load if Area Required by the Base Plate is Given GO
Plate Length GO
Column Flange Width When Plate Length is Given GO
Thickness of Plate GO
Bearing Pressure When Plate Thickness is Given GO
Flange Thickness for H shaped Columns GO
Allowable Bearing Pressure When Flange Thickness for H shaped Column is Given GO
Thickness of Plate When Flange Thickness for H shaped Column is Given GO

What are the difference between columns and struts?

Strut is mainly used in roof trusses and steel bridge. The main purpose of strut is to maintain the rigidity of the structure and to take compressive force and do not designed to take any gravity load but column is designed to various type of load acting on it such like axial load bending moment gravity load shear forces buckling and horizontal load like earthquake load and wind load.

How to Calculate Column Depth When Plate Length is Given?

Column Depth When Plate Length is Given calculator uses Column depth=(Width of Flange+(2.5*(Length of plate-sqrt(Area required by base plate))))/1.1875 to calculate the Column depth, The Column Depth When Plate Length is Given relates the parameters, flange width, area of plate and length of plate. . Column depth and is denoted by d symbol.

How to calculate Column Depth When Plate Length is Given using this online calculator? To use this online calculator for Column Depth When Plate Length is Given, enter Width of Flange (bf), Length of plate (N) and Area required by base plate (A1) and hit the calculate button. Here is how the Column Depth When Plate Length is Given calculation can be explained with given input values -> 29.47368 = (0.01+(2.5*(0.02-sqrt(0.0001))))/1.1875.

FAQ

What is Column Depth When Plate Length is Given?
The Column Depth When Plate Length is Given relates the parameters, flange width, area of plate and length of plate. and is represented as d=(bf+(2.5*(N-sqrt(A1))))/1.1875 or Column depth=(Width of Flange+(2.5*(Length of plate-sqrt(Area required by base plate))))/1.1875. Width of Flange is defined as the spacing of the beam, which is the same as the distance between the middle points of the adjacent spans of the slab, Length of plate is the distance between two extreme points along one side of base plate and Area required by base plate is the minimum area needed by the base plate to avoid failure. .
How to calculate Column Depth When Plate Length is Given?
The Column Depth When Plate Length is Given relates the parameters, flange width, area of plate and length of plate. is calculated using Column depth=(Width of Flange+(2.5*(Length of plate-sqrt(Area required by base plate))))/1.1875. To calculate Column Depth When Plate Length is Given, you need Width of Flange (bf), Length of plate (N) and Area required by base plate (A1). With our tool, you need to enter the respective value for Width of Flange, Length of plate and Area required by base plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Share Image
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!