Condensation of Superheated Vapors Calculator

Main Category	Engineering ↺
Engineering	Chemical Engineering ↺
Chemical Engineering	Heat Transfer ↺
Heat Transfer	Boiling and Condensation ↺

✖Average Heat Transfer Coefficient is equal to the heat flow (Q) across the heat-transfer surface divided by the average temperature (Δt) and the area of the heat-transfer surface (A).ⓘ Average Heat Transfer Coefficient [h ̅]			+10% -10%
✖The area is the amount of two-dimensional space taken up by an object.ⓘ Area [A]			+10% -10%
✖Saturation Temperature is the temperature corresponding to saturated pressure of the superheated vapor.ⓘ Saturation Temperature [T_s^']			+10% -10%
✖Plate surface temperature is the temperature at the surface of the plate.ⓘ Plate Surface Temperature [T_w]			+10% -10%

✖Heat Transfer is the amount of heat that is transferred per unit of time in some material, usually measured in watts (joules per second).ⓘ Condensation of Superheated Vapors [q]

⎘ Copy

👎

Formula

Reset

👍

Credits

Ayush gupta

University school of chemical technology-USCT (GGSIPU), New Delhi

Ayush gupta has created this Calculator and 50+ more calculators!

Soupayan banerjee

National University of Judicial Science (NUJS), Kolkata

Soupayan banerjee has verified this Calculator and 300+ more calculators!

Condensation of Superheated Vapors Solution

STEP 0: Pre-Calculation Summary

Formula Used

Heat Transfer = Average Heat Transfer Coefficient*Area*(Saturation Temperature-Plate Surface Temperature)
q = h ̅*A*(T_s^'-T_w)
This formula uses 4 Variables

Variables Used

Average Heat Transfer Coefficient - Average Heat Transfer Coefficient is equal to the heat flow (Q) across the heat-transfer surface divided by the average temperature (Δt) and the area of the heat-transfer surface (A). (Measured in Watt per Meter² per °C)
Area - The area is the amount of two-dimensional space taken up by an object. (Measured in Square Meter)
Saturation Temperature - Saturation Temperature is the temperature corresponding to saturated pressure of the superheated vapor. (Measured in Celsius)
Plate Surface Temperature - Plate surface temperature is the temperature at the surface of the plate. (Measured in Celsius)

STEP 1: Convert Input(s) to Base Unit

Average Heat Transfer Coefficient: 50 Watt per Meter² per °C --> 50 Watt per Meter² per K (Check conversion here)
Area: 50 Square Meter --> 50 Square Meter No Conversion Required
Saturation Temperature: 90 Celsius --> 363.15 Kelvin (Check conversion here)
Plate Surface Temperature: 30 Celsius --> 303.15 Kelvin (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

q = h ̅*A*(T_s^'-T_w) --> 50*50*(363.15-303.15)

Evaluating ... ...

q = 150000

STEP 3: Convert Result to Output's Unit

150000 Watt --> No Conversion Required

FINAL ANSWER

150000 Watt <-- Heat Transfer

(Calculation completed in 00.000 seconds)

You are here

< 10+ Boiling and Condensation Calculators

Average Heat Transfer Coefficient for Vapor Condensing on Plate

Average Heat Transfer Coefficient = 0.943*((Density of Liquid Film* (Density of Liquid Film-Density of Vapor)*Acceleration Due To Gravity*Latent Heat of Vaporization* (Thermal Conductivity of Film Condensate^3))/(Length of Plate*Viscosity of Film* (Saturated Temperature-Temperature of Plate)))^(0.25) Go

Average Heat Transfer Coefficient for Film Condensation on Plate for Turbulent Flow

Average Heat Transfer Coefficient = 1.13*((Density of Liquid Film* (Density of Liquid Film-Density of Vapor)*[g]*Latent Heat of Vaporization* (Thermal Conductivity of Film Condensate^3))/(Length of Plate*Viscosity of Film* (Saturated Temperature-Temperature of Plate)))^(0.25) Go

Average Heat Transfer Coefficient for Laminar Film Condensation of Sphere

Average Heat Transfer Coefficient = 0.815*((Density of Liquid Film* (Density of Liquid Film-Density of Vapor)*[g]*Latent Heat of Vaporization* (Thermal Conductivity of Film Condensate^3))/(Diameter*Viscosity of Film* (Saturated Temperature-Temperature of Plate)))^(0.25) Go

Radius of Vapour Bubble in Mechanical Equilibrium in Superheated Liquid

Radius of Vapor Bubble = (2*Surface Tension*[R]*(Saturated Temperature^2))/(Pressure of Superheated Liquid*Enthalpy of Vaporization of Liquid*(Temperature of Superheated Liquid-Saturated Temperature)) Go

Critical Heat Flux by Zuber

Critical Heat Flux = ((0.149*Enthalpy of Vaporization of Liquid*Density of Vapor)* (((Surface Tension*[g])*(Density of Liquid-Density of Vapor))/ (Density of Vapor^2))^(1/4)) Go

Reynolds Number using Average Heat Transfer Coefficient for Condensate Film

Reynolds Number of Film = ((4*Average Heat Transfer Coefficient*Length of Plate* (Saturated Temperature-Temperature of Plate))/ (Latent Heat of Vaporization*Viscosity of Film)) Go

Condensation of Superheated Vapors

Heat Transfer = Average Heat Transfer Coefficient*Area*(Saturation Temperature-Plate Surface Temperature) Go

Heat Flux By Mostinski

Heat Transfer Coefficient For Nucleate Boiling = 0.00341*(Critical Pressure^2.3)*(Excess Temperature^2.33)*(Reduced Pressure^0.566) Go

Reynolds Number For Condensate Film

Reynolds Number of Film = (4*Mass Flow of Condensate)/(Wetted Perimeter*Viscosity of Fluid) Go

Excess Temperature in Boiling

Excess Temperature = Surface Temperature-Saturated Temperature Go

Condensation of Superheated Vapors Formula

Heat Transfer = Average Heat Transfer Coefficient*Area*(Saturation Temperature-Plate Surface Temperature)
q = h ̅*A*(T_s^'-T_w)

What is Heat Transfer?

Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy between physical systems. Heat transfer is classified into various mechanisms, such as thermal conduction, thermal convection, thermal radiation, and transfer of energy by phase changes.

Define Thermal Conductivity & Factors affecting it?

Thermal conductivity is defined as the ability of a substance to conduct heat. Factors Affecting The Thermal Conductivity are: Moisture, Density of material, Pressure, Temperature & Structure of material.

How to Calculate Condensation of Superheated Vapors?

Condensation of Superheated Vapors calculator uses Heat Transfer = Average Heat Transfer Coefficient*Area*(Saturation Temperature-Plate Surface Temperature) to calculate the Heat Transfer, The Condensation of Superheated Vapors formula is defined as the product of heat transfer coefficient, area, difference of temperature of superheated vapor and temperature of plate at which vapors are being condensed. The formula is approximately same as Newton's law of cooling. Heat Transfer is denoted by q symbol.

How to calculate Condensation of Superheated Vapors using this online calculator? To use this online calculator for Condensation of Superheated Vapors, enter Average Heat Transfer Coefficient (h ̅), Area (A), Saturation Temperature (T_s^') & Plate Surface Temperature (T_w) and hit the calculate button. Here is how the Condensation of Superheated Vapors calculation can be explained with given input values -> 150000 = 50*50*(363.15-303.15).

FAQ

What is Condensation of Superheated Vapors?

The Condensation of Superheated Vapors formula is defined as the product of heat transfer coefficient, area, difference of temperature of superheated vapor and temperature of plate at which vapors are being condensed. The formula is approximately same as Newton's law of cooling and is represented as q = h ̅*A*(T_s^'-T_w) or Heat Transfer = Average Heat Transfer Coefficient*Area*(Saturation Temperature-Plate Surface Temperature). Average Heat Transfer Coefficient is equal to the heat flow (Q) across the heat-transfer surface divided by the average temperature (Δt) and the area of the heat-transfer surface (A), The area is the amount of two-dimensional space taken up by an object, Saturation Temperature is the temperature corresponding to saturated pressure of the superheated vapor & Plate surface temperature is the temperature at the surface of the plate.

How to calculate Condensation of Superheated Vapors?

The Condensation of Superheated Vapors formula is defined as the product of heat transfer coefficient, area, difference of temperature of superheated vapor and temperature of plate at which vapors are being condensed. The formula is approximately same as Newton's law of cooling is calculated using Heat Transfer = Average Heat Transfer Coefficient*Area*(Saturation Temperature-Plate Surface Temperature). To calculate Condensation of Superheated Vapors, you need Average Heat Transfer Coefficient (h ̅), Area (A), Saturation Temperature (T_s^') & Plate Surface Temperature (T_w). With our tool, you need to enter the respective value for Average Heat Transfer Coefficient, Area, Saturation Temperature & Plate Surface Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!