Constant using Line Losses (2-Phase 4-Wire OS) Solution

STEP 0: Pre-Calculation Summary
Formula Used
Constant Overhead AC = (4*(Power Transmitted*Length of Overhead AC Wire/Maximum Voltage Overhead AC)^2*Resistivity)/Line Losses
K = (4*(P*L/Vm)^2*ρ)/Ploss
This formula uses 6 Variables
Variables Used
Constant Overhead AC - Constant Overhead AC is defined as the constant of line of a Overhead supply system.
Power Transmitted - (Measured in Watt) - Power Transmitted is defined as the product of current and voltage phasor in a overhead ac line at the receiving end.
Length of Overhead AC Wire - (Measured in Meter) - Length of Overhead AC Wire is the total length of the wire from one end to other end.
Maximum Voltage Overhead AC - (Measured in Volt) - Maximum Voltage Overhead AC is defined as the peak amplitude of the AC voltage supplied to the line or wire.
Resistivity - (Measured in Ohm Meter) - Resistivity is the measure of how strongly a material opposes the flow of current through them.
Line Losses - (Measured in Watt) - Line Losses is defined as the total losses occurring in an Overhead AC line when in use.
STEP 1: Convert Input(s) to Base Unit
Power Transmitted: 890 Watt --> 890 Watt No Conversion Required
Length of Overhead AC Wire: 10.63 Meter --> 10.63 Meter No Conversion Required
Maximum Voltage Overhead AC: 62 Volt --> 62 Volt No Conversion Required
Resistivity: 1.7E-05 Ohm Meter --> 1.7E-05 Ohm Meter No Conversion Required
Line Losses: 8.23 Watt --> 8.23 Watt No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
K = (4*(P*L/Vm)^2*ρ)/Ploss --> (4*(890*10.63/62)^2*1.7E-05)/8.23
Evaluating ... ...
K = 0.192385457676858
STEP 3: Convert Result to Output's Unit
0.192385457676858 --> No Conversion Required
FINAL ANSWER
0.192385457676858 0.192385 <-- Constant Overhead AC
(Calculation completed in 00.004 seconds)

Credits

Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verified by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has verified this Calculator and 1200+ more calculators!

16 Wire Parameters Calculators

Line Losses using Area of X-Section(2-Phase 4-Wire OS)
Go Line Losses = (Length of Overhead AC Wire*Resistivity*(Power Transmitted^2))/(2*Area of Overhead AC Wire*(Maximum Voltage Overhead AC^2)*((cos(Phase Difference))^2))
Length of Wire using Area of X-Section(2-Phase 4-Wire OS)
Go Length of Overhead AC Wire = 2*Area of Overhead AC Wire*(Maximum Voltage Overhead AC^2)*Line Losses*((cos(Phase Difference))^2)/(Resistivity*(Power Transmitted^2))
Area of X-Section(2-Phase 4-Wire OS)
Go Area of Overhead AC Wire = (Power Transmitted^2)*Resistivity*Length of Overhead AC Wire/(((cos(Phase Difference))^2)*Line Losses*(Maximum Voltage Overhead AC^2)*2)
Area of X-Section using Line Losses (2-Phase 4-Wire OS)
Go Area of Overhead AC Wire = Resistivity*Length of Overhead AC Wire*(Power Transmitted)^2/(2*Line Losses*(Maximum Voltage Overhead AC*cos(Phase Difference))^2)
Length using Line Losses (2-Phase 4-Wire OS)
Go Length of Overhead AC Wire = 2*Line Losses*Area of Overhead AC Wire*(Maximum Voltage Overhead AC*cos(Phase Difference))^2/((Power Transmitted^2)*Resistivity)
Volume of Conductor Material using Line Losses (2-Phase 4-Wire OS)
Go Volume of Conductor = 2*Resistivity*(Power Transmitted*Length of Overhead AC Wire)^2/(Line Losses*(Maximum Voltage Overhead AC*cos(Phase Difference))^2)
Constant using Load Current (2-Phase 4-Wire OS)
Go Constant Overhead AC = 32*(Current Overhead AC^2)*(cos(Phase Difference)^2)*Resistivity*(Length of Overhead AC Wire^2)/Line Losses
Constant using Line Losses (2-Phase 4-Wire OS)
Go Constant Overhead AC = (4*(Power Transmitted*Length of Overhead AC Wire/Maximum Voltage Overhead AC)^2*Resistivity)/Line Losses
Constant(2-Phase 4-Wire OS)
Go Constant Overhead AC = (4*(Power Transmitted^2)*Resistivity*Length of Overhead AC Wire)/(Line Losses*(Voltage Overhead AC^2))
Area of X-Section using Load Current (2-Phase 4-Wire OS)
Go Area of Overhead AC Wire = 2*(Current Overhead AC)^2*Resistivity*Length of Overhead AC Wire/(Line Losses)
Length using Load Current (2-Phase 4-Wire OS)
Go Length of Overhead AC Wire = Line Losses*Area of Overhead AC Wire/(4*(Current Overhead AC)^2*Resistivity)
Volume of Conductor Material using Load Current (2-Phase 4-Wire OS)
Go Volume of Conductor = 16*Resistivity*(Current Overhead AC*Length of Overhead AC Wire)^2/(Line Losses)
Volume of Conductor Material using Area of X-Section(2-Phase 4-Wire OS)
Go Volume of Conductor = (4)*Area of Overhead AC Wire*Length of Overhead AC Wire
Volume of Conductor Material(2-Phase 4-Wire OS)
Go Volume of Conductor = (4)*Area of Overhead AC Wire*Length of Overhead AC Wire
Line Losses(2-Phase 4-Wire OS)
Go Line Losses = (4)*((Current Overhead AC)^2)*Resistance Overhead AC
Line Losses using Load Current (2-Phase 4-Wire OS)
Go Line Losses = 4*Resistance Overhead AC*(Current Overhead AC)^2

Constant using Line Losses (2-Phase 4-Wire OS) Formula

Constant Overhead AC = (4*(Power Transmitted*Length of Overhead AC Wire/Maximum Voltage Overhead AC)^2*Resistivity)/Line Losses
K = (4*(P*L/Vm)^2*ρ)/Ploss

What is the value of maximum voltage and volume of conductor material in 2-phase 4-wire system?

The volume of conductor material required in this system is 1/2cos2θ times that of 2-wire d.c.system with the one conductor earthed. The maximum voltage between conductors is 2vm so that r.m.s. value of voltage between them is √2vm.

How to Calculate Constant using Line Losses (2-Phase 4-Wire OS)?

Constant using Line Losses (2-Phase 4-Wire OS) calculator uses Constant Overhead AC = (4*(Power Transmitted*Length of Overhead AC Wire/Maximum Voltage Overhead AC)^2*Resistivity)/Line Losses to calculate the Constant Overhead AC, The Constant using Line Losses (2-Phase 4-Wire OS) formula is defined as the total constant of a single-phase two-wire mid-point overhead system. it is represented by K. Constant Overhead AC is denoted by K symbol.

How to calculate Constant using Line Losses (2-Phase 4-Wire OS) using this online calculator? To use this online calculator for Constant using Line Losses (2-Phase 4-Wire OS), enter Power Transmitted (P), Length of Overhead AC Wire (L), Maximum Voltage Overhead AC (Vm), Resistivity (ρ) & Line Losses (Ploss) and hit the calculate button. Here is how the Constant using Line Losses (2-Phase 4-Wire OS) calculation can be explained with given input values -> 0.192385 = (4*(890*10.63/62)^2*1.7E-05)/8.23.

FAQ

What is Constant using Line Losses (2-Phase 4-Wire OS)?
The Constant using Line Losses (2-Phase 4-Wire OS) formula is defined as the total constant of a single-phase two-wire mid-point overhead system. it is represented by K and is represented as K = (4*(P*L/Vm)^2*ρ)/Ploss or Constant Overhead AC = (4*(Power Transmitted*Length of Overhead AC Wire/Maximum Voltage Overhead AC)^2*Resistivity)/Line Losses. Power Transmitted is defined as the product of current and voltage phasor in a overhead ac line at the receiving end, Length of Overhead AC Wire is the total length of the wire from one end to other end, Maximum Voltage Overhead AC is defined as the peak amplitude of the AC voltage supplied to the line or wire, Resistivity is the measure of how strongly a material opposes the flow of current through them & Line Losses is defined as the total losses occurring in an Overhead AC line when in use.
How to calculate Constant using Line Losses (2-Phase 4-Wire OS)?
The Constant using Line Losses (2-Phase 4-Wire OS) formula is defined as the total constant of a single-phase two-wire mid-point overhead system. it is represented by K is calculated using Constant Overhead AC = (4*(Power Transmitted*Length of Overhead AC Wire/Maximum Voltage Overhead AC)^2*Resistivity)/Line Losses. To calculate Constant using Line Losses (2-Phase 4-Wire OS), you need Power Transmitted (P), Length of Overhead AC Wire (L), Maximum Voltage Overhead AC (Vm), Resistivity (ρ) & Line Losses (Ploss). With our tool, you need to enter the respective value for Power Transmitted, Length of Overhead AC Wire, Maximum Voltage Overhead AC, Resistivity & Line Losses and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Constant Overhead AC?
In this formula, Constant Overhead AC uses Power Transmitted, Length of Overhead AC Wire, Maximum Voltage Overhead AC, Resistivity & Line Losses. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Constant Overhead AC = (4*(Power Transmitted^2)*Resistivity*Length of Overhead AC Wire)/(Line Losses*(Voltage Overhead AC^2))
  • Constant Overhead AC = 32*(Current Overhead AC^2)*(cos(Phase Difference)^2)*Resistivity*(Length of Overhead AC Wire^2)/Line Losses
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!