Correction to be Subtracted from Slope Distance Solution

STEP 0: Pre-Calculation Summary
Formula Used
Correction to be Subtracted from Slope Distance = (Measured Length*(1-cos(Slope Angle)))
Ch = (s*(1-cos(θ)))
This formula uses 1 Functions, 3 Variables
Functions Used
cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)
Variables Used
Correction to be Subtracted from Slope Distance - (Measured in Meter) - Correction to be Subtracted from Slope Distance uses slope angle and measured length into consideration.
Measured Length - (Measured in Meter) - The measured length is the length measured from steel tape during observation.
Slope Angle - (Measured in Radian) - Slope Angle is defined as the angle measured between a horizontal plane at a given point on the land surface.
STEP 1: Convert Input(s) to Base Unit
Measured Length: 11 Meter --> 11 Meter No Conversion Required
Slope Angle: 25 Degree --> 0.4363323129985 Radian (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Ch = (s*(1-cos(θ))) --> (11*(1-cos(0.4363323129985)))
Evaluating ... ...
Ch = 1.03061434259647
STEP 3: Convert Result to Output's Unit
1.03061434259647 Meter --> No Conversion Required
FINAL ANSWER
1.03061434259647 1.030614 Meter <-- Correction to be Subtracted from Slope Distance
(Calculation completed in 00.004 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Himanshi Sharma
Bhilai Institute of Technology (BIT), Raipur
Himanshi Sharma has verified this Calculator and 800+ more calculators!

5 Correction for Temperature and Measurements on Slope Calculators

Measured Length given Temperature Correction
Go Measured Length = (Length Correction due to Temperature/(0.0000065*(Final Temperature-Initial Temperature)))
Measured Length given Correction to be Subtracted from Slope Distance
Go Measured Length = (Correction to be Subtracted from Slope Distance/(1-cos(Slope Angle)))
Correction to be Subtracted from Slope Distance
Go Correction to be Subtracted from Slope Distance = (Measured Length*(1-cos(Slope Angle)))
Temperature Correction to Measured Length
Go Length Correction due to Temperature = (0.000065*(Final Temperature-Initial Temperature))
Correction to be Subtracted from Slope Distance given difference in Elevation
Go Correction to be Subtracted = (Difference in Elevation)^2/(2*Measured Length)

Correction to be Subtracted from Slope Distance Formula

Correction to be Subtracted from Slope Distance = (Measured Length*(1-cos(Slope Angle)))
Ch = (s*(1-cos(θ)))

How can Slope Correction be Applied in Survey Measurements?

Slope correction in survey measurements can be applied using trigonometric calculations to adjust for the slope angle and the distance traveled along the slope.

How to Calculate Correction to be Subtracted from Slope Distance?

Correction to be Subtracted from Slope Distance calculator uses Correction to be Subtracted from Slope Distance = (Measured Length*(1-cos(Slope Angle))) to calculate the Correction to be Subtracted from Slope Distance, The Correction to be Subtracted from Slope Distance formula is defined as slope angle and measured length into consideration. Correction to be Subtracted from Slope Distance is denoted by Ch symbol.

How to calculate Correction to be Subtracted from Slope Distance using this online calculator? To use this online calculator for Correction to be Subtracted from Slope Distance, enter Measured Length (s) & Slope Angle (θ) and hit the calculate button. Here is how the Correction to be Subtracted from Slope Distance calculation can be explained with given input values -> 1.030614 = (11*(1-cos(0.4363323129985))).

FAQ

What is Correction to be Subtracted from Slope Distance?
The Correction to be Subtracted from Slope Distance formula is defined as slope angle and measured length into consideration and is represented as Ch = (s*(1-cos(θ))) or Correction to be Subtracted from Slope Distance = (Measured Length*(1-cos(Slope Angle))). The measured length is the length measured from steel tape during observation & Slope Angle is defined as the angle measured between a horizontal plane at a given point on the land surface.
How to calculate Correction to be Subtracted from Slope Distance?
The Correction to be Subtracted from Slope Distance formula is defined as slope angle and measured length into consideration is calculated using Correction to be Subtracted from Slope Distance = (Measured Length*(1-cos(Slope Angle))). To calculate Correction to be Subtracted from Slope Distance, you need Measured Length (s) & Slope Angle (θ). With our tool, you need to enter the respective value for Measured Length & Slope Angle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!