Curved Surface Area of Frustum of Cone given Total Surface Area and Base Area Solution

STEP 0: Pre-Calculation Summary
Formula Used
Curved Surface Area of Frustum of Cone = Total Surface Area of Frustum of Cone-(pi*Top Radius of Frustum of Cone^2)-Base Area of Frustum of Cone
CSA = TSA-(pi*rTop^2)-ABase
This formula uses 1 Constants, 4 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Variables Used
Curved Surface Area of Frustum of Cone - (Measured in Square Meter) - Curved Surface Area of Frustum of Cone is the quantity of plane enclosed by curved surfaces (that is, top and bottom faces are excluded) of the Frustum of the Cone.
Total Surface Area of Frustum of Cone - (Measured in Square Meter) - Total Surface Area of Frustum of Cone is the total quantity of plane enclosed on the entire surface of the Frustum of the Cone.
Top Radius of Frustum of Cone - (Measured in Meter) - Top Radius of Frustum of Cone is the distance between the center and any point on the circumference of the top circular surface of the Frustum of the Cone.
Base Area of Frustum of Cone - (Measured in Square Meter) - The Base Area of Frustum of Cone is the total amount of two-dimensional space occupied by the base face of the Frustum of the Cone.
STEP 1: Convert Input(s) to Base Unit
Total Surface Area of Frustum of Cone: 850 Square Meter --> 850 Square Meter No Conversion Required
Top Radius of Frustum of Cone: 10 Meter --> 10 Meter No Conversion Required
Base Area of Frustum of Cone: 80 Square Meter --> 80 Square Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
CSA = TSA-(pi*rTop^2)-ABase --> 850-(pi*10^2)-80
Evaluating ... ...
CSA = 455.840734641021
STEP 3: Convert Result to Output's Unit
455.840734641021 Square Meter --> No Conversion Required
FINAL ANSWER
455.840734641021 455.8407 Square Meter <-- Curved Surface Area of Frustum of Cone
(Calculation completed in 00.004 seconds)

Credits

Created by Dhruv Walia
Indian Institute of Technology, Indian School of Mines, DHANBAD (IIT ISM), Dhanbad, Jharkhand
Dhruv Walia has created this Calculator and 1100+ more calculators!
Verified by Nayana Phulphagar
Institute of Chartered and Financial Analysts of India National college (ICFAI National College), HUBLI
Nayana Phulphagar has verified this Calculator and 1400+ more calculators!

20 Curved Surface Area of Frustum of Cone Calculators

Curved Surface Area of Frustum of Cone given Volume, Top Area and Base Area
Go Curved Surface Area of Frustum of Cone = pi*(sqrt(Top Area of Frustum of Cone/pi)+sqrt(Base Area of Frustum of Cone/pi))*sqrt(((3*Volume of Frustum of Cone)/(pi*(Top Area of Frustum of Cone/pi+Base Area of Frustum of Cone/pi+(sqrt(Top Area of Frustum of Cone/pi)*sqrt(Base Area of Frustum of Cone/pi)))))^2+(sqrt(Top Area of Frustum of Cone/pi)-sqrt(Base Area of Frustum of Cone/pi))^2)
Curved Surface Area of Frustum of Cone given Volume and Base Area
Go Curved Surface Area of Frustum of Cone = pi*(Top Radius of Frustum of Cone+sqrt(Base Area of Frustum of Cone/pi))*sqrt(((3*Volume of Frustum of Cone)/(pi*(Top Radius of Frustum of Cone^2+Base Area of Frustum of Cone/pi+(sqrt(Base Area of Frustum of Cone/pi)*Top Radius of Frustum of Cone))))^2+(Top Radius of Frustum of Cone-sqrt(Base Area of Frustum of Cone/pi))^2)
Curved Surface Area of Frustum of Cone given Volume and Top Area
Go Curved Surface Area of Frustum of Cone = pi*(sqrt(Top Area of Frustum of Cone/pi)+Base Radius of Frustum of Cone)*sqrt(((3*Volume of Frustum of Cone)/(pi*(Top Area of Frustum of Cone/pi+Base Radius of Frustum of Cone^2+(sqrt(Top Area of Frustum of Cone/pi)*Base Radius of Frustum of Cone))))^2+(sqrt(Top Area of Frustum of Cone/pi)-Base Radius of Frustum of Cone)^2)
Curved Surface Area of Frustum of Cone given Volume
Go Curved Surface Area of Frustum of Cone = pi*(Top Radius of Frustum of Cone+Base Radius of Frustum of Cone)*sqrt(((3*Volume of Frustum of Cone)/(pi*(Top Radius of Frustum of Cone^2+Base Radius of Frustum of Cone^2+(Top Radius of Frustum of Cone*Base Radius of Frustum of Cone))))^2+(Top Radius of Frustum of Cone-Base Radius of Frustum of Cone)^2)
Curved Surface Area of Frustum of Cone given Base Area and Top Area
Go Curved Surface Area of Frustum of Cone = pi*(sqrt(Top Area of Frustum of Cone/pi)+sqrt(Base Area of Frustum of Cone/pi))*sqrt((sqrt(Top Area of Frustum of Cone/pi)-sqrt(Base Area of Frustum of Cone/pi))^2+Height of Frustum of Cone^2)
Curved Surface Area of Frustum of Cone given Base Area
Go Curved Surface Area of Frustum of Cone = pi*(Top Radius of Frustum of Cone+sqrt(Base Area of Frustum of Cone/pi))*sqrt((Top Radius of Frustum of Cone-sqrt(Base Area of Frustum of Cone/pi))^2+Height of Frustum of Cone^2)
Curved Surface Area of Frustum of Cone given Top Area
Go Curved Surface Area of Frustum of Cone = pi*(sqrt(Top Area of Frustum of Cone/pi)+Base Radius of Frustum of Cone)*sqrt((sqrt(Top Area of Frustum of Cone/pi)-Base Radius of Frustum of Cone)^2+Height of Frustum of Cone^2)
Curved Surface Area of Frustum of Cone given Slant Height, Height and Base Area
Go Curved Surface Area of Frustum of Cone = pi*(sqrt(Slant Height of Frustum of Cone^2-Height of Frustum of Cone^2)+2*sqrt(Base Area of Frustum of Cone/pi))*Slant Height of Frustum of Cone
Curved Surface Area of Frustum of Cone given Slant Height, Height and Top Area
Go Curved Surface Area of Frustum of Cone = pi*(2*sqrt(Top Area of Frustum of Cone/pi)-sqrt(Slant Height of Frustum of Cone^2-Height of Frustum of Cone^2))*Slant Height of Frustum of Cone
Curved Surface Area of Frustum of Cone
Go Curved Surface Area of Frustum of Cone = pi*(Top Radius of Frustum of Cone+Base Radius of Frustum of Cone)*sqrt((Top Radius of Frustum of Cone-Base Radius of Frustum of Cone)^2+Height of Frustum of Cone^2)
Curved Surface Area of Frustum of Cone given Slant Height, Base Area and Top Area
Go Curved Surface Area of Frustum of Cone = pi*(sqrt(Top Area of Frustum of Cone/pi)+sqrt(Base Area of Frustum of Cone/pi))*Slant Height of Frustum of Cone
Curved Surface Area of Frustum of Cone given Slant Height, Height and Base Radius
Go Curved Surface Area of Frustum of Cone = pi*(sqrt(Slant Height of Frustum of Cone^2-Height of Frustum of Cone^2)+2*Base Radius of Frustum of Cone)*Slant Height of Frustum of Cone
Curved Surface Area of Frustum of Cone given Slant Height, Height and Top Radius
Go Curved Surface Area of Frustum of Cone = pi*(2*Top Radius of Frustum of Cone-sqrt(Slant Height of Frustum of Cone^2-Height of Frustum of Cone^2))*Slant Height of Frustum of Cone
Curved Surface Area of Frustum of Cone given Slant Height and Base Area
Go Curved Surface Area of Frustum of Cone = pi*(Top Radius of Frustum of Cone+sqrt(Base Area of Frustum of Cone/pi))*Slant Height of Frustum of Cone
Curved Surface Area of Frustum of Cone given Slant Height and Top Area
Go Curved Surface Area of Frustum of Cone = pi*(sqrt(Top Area of Frustum of Cone/pi)+Base Radius of Frustum of Cone)*Slant Height of Frustum of Cone
Curved Surface Area of Frustum of Cone given Total Surface Area
Go Curved Surface Area of Frustum of Cone = Total Surface Area of Frustum of Cone-(pi*(Top Radius of Frustum of Cone^2+Base Radius of Frustum of Cone^2))
Curved Surface Area of Frustum of Cone given Total Surface Area and Base Area
Go Curved Surface Area of Frustum of Cone = Total Surface Area of Frustum of Cone-(pi*Top Radius of Frustum of Cone^2)-Base Area of Frustum of Cone
Curved Surface Area of Frustum of Cone given Total Surface Area and Top Area
Go Curved Surface Area of Frustum of Cone = Total Surface Area of Frustum of Cone-(pi*Base Radius of Frustum of Cone^2)-Top Area of Frustum of Cone
Curved Surface Area of Frustum of Cone given Slant Height
Go Curved Surface Area of Frustum of Cone = pi*(Top Radius of Frustum of Cone+Base Radius of Frustum of Cone)*Slant Height of Frustum of Cone
Curved Surface Area of Frustum of Cone given Total Surface Area, Top Area and Base Area
Go Curved Surface Area of Frustum of Cone = Total Surface Area of Frustum of Cone-(Base Area of Frustum of Cone+Top Area of Frustum of Cone)

Curved Surface Area of Frustum of Cone given Total Surface Area and Base Area Formula

Curved Surface Area of Frustum of Cone = Total Surface Area of Frustum of Cone-(pi*Top Radius of Frustum of Cone^2)-Base Area of Frustum of Cone
CSA = TSA-(pi*rTop^2)-ABase

What is a Frustum of Cone?

A Frustum of Cone is the part of cone when it is cut by a (horizontally parallel to the base) plane into two parts. The upper part of the cone remains same in shape but the bottom part makes a frustum.

How to Calculate Curved Surface Area of Frustum of Cone given Total Surface Area and Base Area?

Curved Surface Area of Frustum of Cone given Total Surface Area and Base Area calculator uses Curved Surface Area of Frustum of Cone = Total Surface Area of Frustum of Cone-(pi*Top Radius of Frustum of Cone^2)-Base Area of Frustum of Cone to calculate the Curved Surface Area of Frustum of Cone, The Curved Surface Area of Frustum of Cone given Total Surface Area and Base Area formula is defined as the quantity of plane enclosed by curved surfaces (that is, top and bottom faces are excluded) of the Frustum of Cone, calculated using the total surface area, top radius and base area of the Frustum of Cone. Curved Surface Area of Frustum of Cone is denoted by CSA symbol.

How to calculate Curved Surface Area of Frustum of Cone given Total Surface Area and Base Area using this online calculator? To use this online calculator for Curved Surface Area of Frustum of Cone given Total Surface Area and Base Area, enter Total Surface Area of Frustum of Cone (TSA), Top Radius of Frustum of Cone (rTop) & Base Area of Frustum of Cone (ABase) and hit the calculate button. Here is how the Curved Surface Area of Frustum of Cone given Total Surface Area and Base Area calculation can be explained with given input values -> 455.8407 = 850-(pi*10^2)-80.

FAQ

What is Curved Surface Area of Frustum of Cone given Total Surface Area and Base Area?
The Curved Surface Area of Frustum of Cone given Total Surface Area and Base Area formula is defined as the quantity of plane enclosed by curved surfaces (that is, top and bottom faces are excluded) of the Frustum of Cone, calculated using the total surface area, top radius and base area of the Frustum of Cone and is represented as CSA = TSA-(pi*rTop^2)-ABase or Curved Surface Area of Frustum of Cone = Total Surface Area of Frustum of Cone-(pi*Top Radius of Frustum of Cone^2)-Base Area of Frustum of Cone. Total Surface Area of Frustum of Cone is the total quantity of plane enclosed on the entire surface of the Frustum of the Cone, Top Radius of Frustum of Cone is the distance between the center and any point on the circumference of the top circular surface of the Frustum of the Cone & The Base Area of Frustum of Cone is the total amount of two-dimensional space occupied by the base face of the Frustum of the Cone.
How to calculate Curved Surface Area of Frustum of Cone given Total Surface Area and Base Area?
The Curved Surface Area of Frustum of Cone given Total Surface Area and Base Area formula is defined as the quantity of plane enclosed by curved surfaces (that is, top and bottom faces are excluded) of the Frustum of Cone, calculated using the total surface area, top radius and base area of the Frustum of Cone is calculated using Curved Surface Area of Frustum of Cone = Total Surface Area of Frustum of Cone-(pi*Top Radius of Frustum of Cone^2)-Base Area of Frustum of Cone. To calculate Curved Surface Area of Frustum of Cone given Total Surface Area and Base Area, you need Total Surface Area of Frustum of Cone (TSA), Top Radius of Frustum of Cone (rTop) & Base Area of Frustum of Cone (ABase). With our tool, you need to enter the respective value for Total Surface Area of Frustum of Cone, Top Radius of Frustum of Cone & Base Area of Frustum of Cone and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Curved Surface Area of Frustum of Cone?
In this formula, Curved Surface Area of Frustum of Cone uses Total Surface Area of Frustum of Cone, Top Radius of Frustum of Cone & Base Area of Frustum of Cone. We can use 19 other way(s) to calculate the same, which is/are as follows -
  • Curved Surface Area of Frustum of Cone = pi*(2*Top Radius of Frustum of Cone-sqrt(Slant Height of Frustum of Cone^2-Height of Frustum of Cone^2))*Slant Height of Frustum of Cone
  • Curved Surface Area of Frustum of Cone = pi*(sqrt(Slant Height of Frustum of Cone^2-Height of Frustum of Cone^2)+2*Base Radius of Frustum of Cone)*Slant Height of Frustum of Cone
  • Curved Surface Area of Frustum of Cone = pi*(sqrt(Top Area of Frustum of Cone/pi)+sqrt(Base Area of Frustum of Cone/pi))*Slant Height of Frustum of Cone
  • Curved Surface Area of Frustum of Cone = pi*(sqrt(Slant Height of Frustum of Cone^2-Height of Frustum of Cone^2)+2*sqrt(Base Area of Frustum of Cone/pi))*Slant Height of Frustum of Cone
  • Curved Surface Area of Frustum of Cone = pi*(2*sqrt(Top Area of Frustum of Cone/pi)-sqrt(Slant Height of Frustum of Cone^2-Height of Frustum of Cone^2))*Slant Height of Frustum of Cone
  • Curved Surface Area of Frustum of Cone = pi*(Top Radius of Frustum of Cone+sqrt(Base Area of Frustum of Cone/pi))*sqrt((Top Radius of Frustum of Cone-sqrt(Base Area of Frustum of Cone/pi))^2+Height of Frustum of Cone^2)
  • Curved Surface Area of Frustum of Cone = pi*(sqrt(Top Area of Frustum of Cone/pi)+sqrt(Base Area of Frustum of Cone/pi))*sqrt((sqrt(Top Area of Frustum of Cone/pi)-sqrt(Base Area of Frustum of Cone/pi))^2+Height of Frustum of Cone^2)
  • Curved Surface Area of Frustum of Cone = pi*(sqrt(Top Area of Frustum of Cone/pi)+Base Radius of Frustum of Cone)*sqrt((sqrt(Top Area of Frustum of Cone/pi)-Base Radius of Frustum of Cone)^2+Height of Frustum of Cone^2)
  • Curved Surface Area of Frustum of Cone = pi*(Top Radius of Frustum of Cone+sqrt(Base Area of Frustum of Cone/pi))*Slant Height of Frustum of Cone
  • Curved Surface Area of Frustum of Cone = pi*(sqrt(Top Area of Frustum of Cone/pi)+Base Radius of Frustum of Cone)*Slant Height of Frustum of Cone
  • Curved Surface Area of Frustum of Cone = Total Surface Area of Frustum of Cone-(pi*Base Radius of Frustum of Cone^2)-Top Area of Frustum of Cone
  • Curved Surface Area of Frustum of Cone = Total Surface Area of Frustum of Cone-(Base Area of Frustum of Cone+Top Area of Frustum of Cone)
  • Curved Surface Area of Frustum of Cone = pi*(sqrt(Top Area of Frustum of Cone/pi)+sqrt(Base Area of Frustum of Cone/pi))*sqrt(((3*Volume of Frustum of Cone)/(pi*(Top Area of Frustum of Cone/pi+Base Area of Frustum of Cone/pi+(sqrt(Top Area of Frustum of Cone/pi)*sqrt(Base Area of Frustum of Cone/pi)))))^2+(sqrt(Top Area of Frustum of Cone/pi)-sqrt(Base Area of Frustum of Cone/pi))^2)
  • Curved Surface Area of Frustum of Cone = pi*(sqrt(Top Area of Frustum of Cone/pi)+Base Radius of Frustum of Cone)*sqrt(((3*Volume of Frustum of Cone)/(pi*(Top Area of Frustum of Cone/pi+Base Radius of Frustum of Cone^2+(sqrt(Top Area of Frustum of Cone/pi)*Base Radius of Frustum of Cone))))^2+(sqrt(Top Area of Frustum of Cone/pi)-Base Radius of Frustum of Cone)^2)
  • Curved Surface Area of Frustum of Cone = pi*(Top Radius of Frustum of Cone+sqrt(Base Area of Frustum of Cone/pi))*sqrt(((3*Volume of Frustum of Cone)/(pi*(Top Radius of Frustum of Cone^2+Base Area of Frustum of Cone/pi+(sqrt(Base Area of Frustum of Cone/pi)*Top Radius of Frustum of Cone))))^2+(Top Radius of Frustum of Cone-sqrt(Base Area of Frustum of Cone/pi))^2)
  • Curved Surface Area of Frustum of Cone = pi*(Top Radius of Frustum of Cone+Base Radius of Frustum of Cone)*sqrt((Top Radius of Frustum of Cone-Base Radius of Frustum of Cone)^2+Height of Frustum of Cone^2)
  • Curved Surface Area of Frustum of Cone = pi*(Top Radius of Frustum of Cone+Base Radius of Frustum of Cone)*Slant Height of Frustum of Cone
  • Curved Surface Area of Frustum of Cone = Total Surface Area of Frustum of Cone-(pi*(Top Radius of Frustum of Cone^2+Base Radius of Frustum of Cone^2))
  • Curved Surface Area of Frustum of Cone = pi*(Top Radius of Frustum of Cone+Base Radius of Frustum of Cone)*sqrt(((3*Volume of Frustum of Cone)/(pi*(Top Radius of Frustum of Cone^2+Base Radius of Frustum of Cone^2+(Top Radius of Frustum of Cone*Base Radius of Frustum of Cone))))^2+(Top Radius of Frustum of Cone-Base Radius of Frustum of Cone)^2)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!