Cyanogenic Glycoside Estimation Calculator

✖Titre Value is the volume of titrant used for a definite amount of unknown reagent at its equivalence point.ⓘ Titre Value [TV]			+10% -10%
✖Extract Volume is volume of extract present after purification.ⓘ Extract Volume [EV]			+10% -10%
✖Aliquot volume is a known volume of liquid that represents a part of some larger volume.ⓘ Aliquot Volume [AV]			+10% -10%
✖Sample Weight is weight of plant material taken.ⓘ Sample Weight [W]			+10% -10%

✖Cyanogenic Glycoside Content is amount of Cyanogenic glycosides, which are a group of plant toxins that account for approximately 90% of cyanogens.ⓘ Cyanogenic Glycoside Estimation [CGC]

⎘ Copy

👎

Formula

✖

Cyanogenic Glycoside Estimation

Formula

`"CGC" = ("TV"*1.08*"EV")/("AV"*"W")`

Example

`"9"=("5cm³"*1.08*"25cm³")/("100cm³"*"150g")`

Calculator

LaTeX

Reset

👍

Download Chemistry Formula PDF PDF Image

Cyanogenic Glycoside Estimation Solution

STEP 0: Pre-Calculation Summary

Formula Used

Cyanogenic Glycoside Content = (Titre Value*1.08*Extract Volume)/(Aliquot Volume*Sample Weight)
CGC = (TV*1.08*EV)/(AV*W)
This formula uses 5 Variables

Variables Used

Cyanogenic Glycoside Content - Cyanogenic Glycoside Content is amount of Cyanogenic glycosides, which are a group of plant toxins that account for approximately 90% of cyanogens.
Titre Value - (Measured in Cubic Centimeter) - Titre Value is the volume of titrant used for a definite amount of unknown reagent at its equivalence point.
Extract Volume - (Measured in Cubic Centimeter) - Extract Volume is volume of extract present after purification.
Aliquot Volume - (Measured in Cubic Centimeter) - Aliquot volume is a known volume of liquid that represents a part of some larger volume.
Sample Weight - (Measured in Kilogram) - Sample Weight is weight of plant material taken.

STEP 1: Convert Input(s) to Base Unit

Titre Value: 5 Cubic Centimeter --> 5 Cubic Centimeter No Conversion Required
Extract Volume: 25 Cubic Centimeter --> 25 Cubic Centimeter No Conversion Required
Aliquot Volume: 100 Cubic Centimeter --> 100 Cubic Centimeter No Conversion Required
Sample Weight: 150 Gram --> 0.15 Kilogram (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

CGC = (TV*1.08*EV)/(AV*W) --> (5*1.08*25)/(100*0.15)

Evaluating ... ...

CGC = 9

STEP 3: Convert Result to Output's Unit

9 --> No Conversion Required

FINAL ANSWER

9 <-- Cyanogenic Glycoside Content

(Calculation completed in 00.020 seconds)

You are here -

Home » Chemistry » Phytochemistry » Cyanogenic Glycoside Estimation

Credits

Created by Sangita Kalita

National Institute of Technology, Manipur (NIT Manipur), Imphal, Manipur

Sangita Kalita has created this Calculator and 50+ more calculators!

Verified by Soupayan banerjee

National University of Judicial Science (NUJS), Kolkata

Soupayan banerjee has verified this Calculator and 800+ more calculators!

< 24 Phytochemistry Calculators

Lycopodium Spore Method of Percentage Purity

Go Percentage Purity Lycopodium Spore = (Characteristic Structures Number*Lycopodium Weight*100)/(Sample Weight For Lycopodium*Lycopodium Spores Number*286000)

Iodine Value

Go Iodine Value = 1.69*(Blank Volume for Iodine Value-Sample Volume for Iodine Value)*Solution Normality for Iodine Value/Sample Weight

Specific Gravity at 30 Degree Celcius

Go Specific Gravity At 30 = (Weight Bottle with Oil-Weight Bottle)/(Weight Bottle with Water-Weight Bottle)

Cyanogenic Glycoside Estimation

Go Cyanogenic Glycoside Content = (Titre Value*1.08*Extract Volume)/(Aliquot Volume*Sample Weight)

Tannin Calculation

Go Tannins Content = (Tannic Acid Concentration*Extract Volume*100)/(Aliquot Volume*Sample Weight)

Bitterness Value

Go Bitterness Value = (2000*Concentration of HCl)/(Concentration of Stock Solution*Volume of Sample)

Percent Post Implantation Loss

Go Percent Postimplantation Loss = ((Number of implants-Number of litters)/Number of implants)*100

Stomatal Index

Go Stomatal Index = (Stomata Per Unit Area/(Epidermal In Unit Area+Stomata Per Unit Area))*100

Water Soluble Extractive Value

Go Water Soluble Extractive Value = (Dish Residue Weight-Dish Weight)*4*100/Sample Weight

Water Soluble Ash Percentage

Go Water Soluble Ash Percentage = (Dish Residue Weight-Dish Weight)*(100/Sample Weight)

Percent Preimplantation Loss

Go Percent Preimplantation Loss = ((Number of CL-Number of implants)/Number of CL)*100

Acid Value in Phytochemistry

Go Acid Value in Phytochemistry = (56.1*KOH Volume*KOH Normality)/Sample Weight

Percentage Casein

Go Percentage Casein = (Casein Content/Milk for Percentage Casein)*100

Haemolytic Activity

Go Haemolytic Index = 1000*Saponin Quantity/Plant Material Quantity

Average Litter Size

Go Average Litter Size = Total Litter Size/Number Of Females Mated

Moisture and Volatile Matter

Go Moisture and Volatile Matter = (Dry Loss/Material Weight)*100

Post Implantation Loss

Go Preimplantation Loss = Number of implants-Number of litters

Percentage Flavonoid

Go Percentage Flavonoid = (Flavonoid Weight/Sample Weight)*100

Percentage Alkaloid

Go Percentage Alkaloid = (Alkaloid Weight/Sample Weight)*100

Percentage Saponin

Go Percentage Saponin = (Saponin Weight/Sample Weight)*100

Preimplantation loss

Go Preimplantation Loss = Number of CL-Number of implants

Percentage Lipid

Go Percentage Lipid = (Lipid Weight/Sample Weight)*100

C/N ratio

Go CN Ratio = Carbon Weight/Nitrogen Weight

Foaming Index

Go Foaming Index = 1000/Volume of Sample

Cyanogenic Glycoside Estimation Formula

Cyanogenic Glycoside Content = (Titre Value*1.08*Extract Volume)/(Aliquot Volume*Sample Weight)
CGC = (TV*1.08*EV)/(AV*W)

What method was implemented for quantitative determination of Cyanogenic glycoside?

Cyanogenic glycoside quantitative determination methodology used in this research is that by Amadi et al. as reported by Ejikeme et al.

How to Calculate Cyanogenic Glycoside Estimation?

Cyanogenic Glycoside Estimation calculator uses Cyanogenic Glycoside Content = (Titre Value*1.08*Extract Volume)/(Aliquot Volume*Sample Weight) to calculate the Cyanogenic Glycoside Content, The Cyanogenic Glycoside Estimation formula is defined as amount of Cyanogenic glycosides, which are a group of plant toxins that account for approximately 90% of the wider group of plant toxins known as cyanogens. Cyanogenic Glycoside Content is denoted by CGC symbol.

How to calculate Cyanogenic Glycoside Estimation using this online calculator? To use this online calculator for Cyanogenic Glycoside Estimation, enter Titre Value (TV), Extract Volume (EV), Aliquot Volume (AV) & Sample Weight (W) and hit the calculate button. Here is how the Cyanogenic Glycoside Estimation calculation can be explained with given input values -> 9 = (5E-06*1.08*2.5E-05)/(0.0001*0.15).

FAQ

What is Cyanogenic Glycoside Estimation?

The Cyanogenic Glycoside Estimation formula is defined as amount of Cyanogenic glycosides, which are a group of plant toxins that account for approximately 90% of the wider group of plant toxins known as cyanogens and is represented as CGC = (TV*1.08*EV)/(AV*W) or Cyanogenic Glycoside Content = (Titre Value*1.08*Extract Volume)/(Aliquot Volume*Sample Weight). Titre Value is the volume of titrant used for a definite amount of unknown reagent at its equivalence point, Extract Volume is volume of extract present after purification, Aliquot volume is a known volume of liquid that represents a part of some larger volume & Sample Weight is weight of plant material taken.

How to calculate Cyanogenic Glycoside Estimation?

The Cyanogenic Glycoside Estimation formula is defined as amount of Cyanogenic glycosides, which are a group of plant toxins that account for approximately 90% of the wider group of plant toxins known as cyanogens is calculated using Cyanogenic Glycoside Content = (Titre Value*1.08*Extract Volume)/(Aliquot Volume*Sample Weight). To calculate Cyanogenic Glycoside Estimation, you need Titre Value (TV), Extract Volume (EV), Aliquot Volume (AV) & Sample Weight (W). With our tool, you need to enter the respective value for Titre Value, Extract Volume, Aliquot Volume & Sample Weight and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search