Deflection for Hollow Rectangle When Load is Distributed Calculator

Category	Engineering ↺
Engineering	Civil ↺
Civil	Beams ↺
Beams	Rolling and Moving Loads ↺

✖Greatest safe load is the maximum safe point load allowable at the center of the beam.ⓘ Greatest Safe Load [W]			+10% -10%
✖Length of the beam is the center to center distance between the supports or the effective length of the beam.ⓘ Length of the Beam [L]			+10% -10%
✖Sectional Area is the area of a two-dimensional shape that is obtained when a three-dimensional object is sliced perpendicular to the axis of the beam at a point.ⓘ Sectional Area [A]			+10% -10%
✖Depth of the Beam is the overall depth of the cross section of the beam perpendicular to the axis of the beam.ⓘ Depth of the Beam [D]			+10% -10%
✖Interior cross-sectional area of beam is the hollow area of a two-dimensional shape that is obtained when a three-dimensional object is sliced perpendicular to the axis at a point.ⓘ Interior Cross-Sectional Area of Beam [a]			+10% -10%
✖Interior Depth of the beam is the depth of the hollow cross section of the beam perpendicular to the axis of the beam.ⓘ Interior Depth of the Beam [d]			+10% -10%

✖Deflection of beam is the degree to which a structural element is displaced under a load (due to its deformation). It may refer to an angle or a distance.ⓘ Deflection for Hollow Rectangle When Load is Distributed [ɗ]

⎘ Copy

👎 Report Issue!

👍 Share Now!

You are here:

Home »
Engineering »
Civil »
Beams »
Rolling and Moving Loads »
Deflection for Hollow Rectangle When Load is Distributed

Rudrani Tidke

Cummins College of Engineering for Women (CCEW), Pune

Rudrani Tidke has created this Calculator and 100+ more calculators!

Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 500+ more calculators!

< 11 Other formulas that you can solve using the same Inputs

Deflection for Hollow Rectangle When Load in Middle

Deflection of Beam=(Greatest Safe Load*Length of the Beam^3)/(32*(Sectional Area*(Depth of the Beam^2)-Interior Cross-Sectional Area of Beam*(Interior Depth of the Beam^2))) GO

Greatest Safe Load for Hollow Rectangle When Load is Distributed

Greatest Safe Load=1780*(Sectional Area*Depth of the Beam-Interior Cross-Sectional Area of Beam*Interior Depth of the Beam)/Distance between Supports GO

Greatest Safe Load for Hollow Rectangle When Load in Middle

Greatest Safe Load=(890*(Sectional Area*Depth of the Beam-Interior Cross-Sectional Area of Beam*Interior Depth of the Beam))/Length of the Beam GO

Static deflection for cantilever beam with a point load at free end

Static deflection=(Load attached to the free end of constraint*(Length of the Beam^3))/(3*Young's Modulus*Moment of inertia of the beam) GO

Static deflection for cantilever beam with a uniformly distributed load

Static deflection=(Load per unit length*(Length of the Beam^4))/(8*Young's Modulus*Moment of inertia of the beam) GO

Deflection for Solid Rectangle When Load is Distributed

Deflection of Beam=(Greatest safe distributed load*Length of the Beam^3)/(52*Sectional Area*Depth of the Beam^2) GO

Deflection for Solid Rectangle When Load in Middle

Deflection of Beam=(Greatest Safe Load*Length of the Beam^3)/(32*Sectional Area*Depth of the Beam^2) GO

Greatest Safe Load for Solid Rectangle When Load is Distributed

Greatest safe distributed load=1780*Sectional Area*Depth of the Beam/Length of the Beam GO

Greatest Safe Load for Solid Cylinder When Load is Distributed

Greatest Safe Load=1333*(Sectional Area*Depth of the Beam)/Length of the Beam GO

Greatest Safe Load for Solid Cylinder When Load in Middle

Greatest Safe Load=(667*Sectional Area*Depth of the Beam)/Length of the Beam GO

Greatest Safe Load for Solid Rectangle When Load in Middle

Greatest Safe Load=890*Sectional Area*Depth of the Beam/Length of the Beam GO

< 3 Other formulas that calculate the same Output

Deflection for Hollow Rectangle When Load in Middle

Deflection of Beam=(Greatest Safe Load*Length of the Beam^3)/(32*(Sectional Area*(Depth of the Beam^2)-Interior Cross-Sectional Area of Beam*(Interior Depth of the Beam^2))) GO

Deflection for Solid Rectangle When Load is Distributed

Deflection of Beam=(Greatest safe distributed load*Length of the Beam^3)/(52*Sectional Area*Depth of the Beam^2) GO

Deflection for Solid Rectangle When Load in Middle

Deflection of Beam=(Greatest Safe Load*Length of the Beam^3)/(32*Sectional Area*Depth of the Beam^2) GO

Deflection for Hollow Rectangle When Load is Distributed Formula

Deflection of Beam=Greatest Safe Load*(Length of the Beam^3)/(52*(Sectional Area*Depth of the Beam^-Interior Cross-Sectional Area of Beam*Interior Depth of the Beam^2))
ɗ=W*(L^3)/(52*(A*D^-a*d^2))

More formulas

Greatest Safe Load for Solid Rectangle When Load in Middle GO

Greatest Safe Load for Solid Rectangle When Load is Distributed GO

Deflection for Solid Rectangle When Load in Middle GO

Deflection for Solid Rectangle When Load is Distributed GO

Greatest Safe Load for Hollow Rectangle When Load in Middle GO

Greatest Safe Load for Hollow Rectangle When Load is Distributed GO

Deflection for Hollow Rectangle When Load in Middle GO

Greatest Safe Load for Solid Cylinder When Load in Middle GO

Greatest Safe Load for Solid Cylinder When Load is Distributed GO

Why is beam deflection important?

Deflection is caused by many sources, such as, loads, temperature, construction error, and settlements. It is important to include the calculation of deflections into the design procedure to prevent structural damage to secondary structures (concrete or plaster walls or roofs) or to solve indeterminate problems.

How to Calculate Deflection for Hollow Rectangle When Load is Distributed?

Deflection for Hollow Rectangle When Load is Distributed calculator uses Deflection of Beam=Greatest Safe Load*(Length of the Beam^3)/(52*(Sectional Area*Depth of the Beam^-Interior Cross-Sectional Area of Beam*Interior Depth of the Beam^2)) to calculate the Deflection of Beam, The Deflection for Hollow Rectangle When Load is Distributed formula is defined as the vertical displacement of a point on a hallow rectangular beam loaded in distributed. Deflection of Beam and is denoted by ɗ symbol.

How to calculate Deflection for Hollow Rectangle When Load is Distributed using this online calculator? To use this online calculator for Deflection for Hollow Rectangle When Load is Distributed, enter Greatest Safe Load (W), Length of the Beam (L), Sectional Area (A), Depth of the Beam (D), Interior Cross-Sectional Area of Beam (a) and Interior Depth of the Beam (d) and hit the calculate button. Here is how the Deflection for Hollow Rectangle When Load is Distributed calculation can be explained with given input values -> 2.271E+6 = 44.4822161525477*(3.04800000001219^3)/(52*(0.00645160000005161*0.254000000001016^-0.00645160000005161*0.254000000001016^2)).

FAQ

What is Deflection for Hollow Rectangle When Load is Distributed?

The Deflection for Hollow Rectangle When Load is Distributed formula is defined as the vertical displacement of a point on a hallow rectangular beam loaded in distributed and is represented as ɗ=W*(L^3)/(52*(A*D^-a*d^2)) or Deflection of Beam=Greatest Safe Load*(Length of the Beam^3)/(52*(Sectional Area*Depth of the Beam^-Interior Cross-Sectional Area of Beam*Interior Depth of the Beam^2)). Greatest safe load is the maximum safe point load allowable at the center of the beam, Length of the beam is the center to center distance between the supports or the effective length of the beam, Sectional Area is the area of a two-dimensional shape that is obtained when a three-dimensional object is sliced perpendicular to the axis of the beam at a point, Depth of the Beam is the overall depth of the cross section of the beam perpendicular to the axis of the beam, Interior cross-sectional area of beam is the hollow area of a two-dimensional shape that is obtained when a three-dimensional object is sliced perpendicular to the axis at a point and Interior Depth of the beam is the depth of the hollow cross section of the beam perpendicular to the axis of the beam.

How to calculate Deflection for Hollow Rectangle When Load is Distributed?

The Deflection for Hollow Rectangle When Load is Distributed formula is defined as the vertical displacement of a point on a hallow rectangular beam loaded in distributed is calculated using Deflection of Beam=Greatest Safe Load*(Length of the Beam^3)/(52*(Sectional Area*Depth of the Beam^-Interior Cross-Sectional Area of Beam*Interior Depth of the Beam^2)). To calculate Deflection for Hollow Rectangle When Load is Distributed, you need Greatest Safe Load (W), Length of the Beam (L), Sectional Area (A), Depth of the Beam (D), Interior Cross-Sectional Area of Beam (a) and Interior Depth of the Beam (d). With our tool, you need to enter the respective value for Greatest Safe Load, Length of the Beam, Sectional Area, Depth of the Beam, Interior Cross-Sectional Area of Beam and Interior Depth of the Beam and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Deflection of Beam?

In this formula, Deflection of Beam uses Greatest Safe Load, Length of the Beam, Sectional Area, Depth of the Beam, Interior Cross-Sectional Area of Beam and Interior Depth of the Beam. We can use 3 other way(s) to calculate the same, which is/are as follows -

Deflection of Beam=(Greatest Safe Load*Length of the Beam^3)/(32*Sectional Area*Depth of the Beam^2)
Deflection of Beam=(Greatest safe distributed load*Length of the Beam^3)/(52*Sectional Area*Depth of the Beam^2)
Deflection of Beam=(Greatest Safe Load*Length of the Beam^3)/(32*(Sectional Area*(Depth of the Beam^2)-Interior Cross-Sectional Area of Beam*(Interior Depth of the Beam^2)))

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!