Depth of Contact using Maximum Depth and Displacement of Surface Calculator

⤿

Mechanical and Nanomechanical Properties

Electronic Structure in Clusters and Nanoparticles

Optical Properties of Metallic Nanoparticles

Size Effects on Structure and Morphology of Free or Supported Nanoparticles

✖The Maximum Depth is the highest possible depth quantity during indentation.ⓘ Maximum Depth [h_max]			+10% -10%
✖The Displacement of Surface is simply the displacement of the surface on the perimeter of the contact due to elastic depression.ⓘ Displacement of Surface [h_s]			+10% -10%

✖The Depth of Contact is defined as the depth of penetration when the indenter is in contact with the sample.ⓘ Depth of Contact using Maximum Depth and Displacement of Surface [h_c]

⎘ Copy

👎

Formula

✖

Depth of Contact using Maximum Depth and Displacement of Surface

Formula

`"h"_{"c"} = "h"_{"max"}-"h"_{"s"}`

Example

`"30nm"="80nm"-"50nm"`

Calculator

LaTeX

Reset

👍

Download Chemistry Formula PDF PDF Image

Depth of Contact using Maximum Depth and Displacement of Surface Solution

STEP 0: Pre-Calculation Summary

Formula Used

Depth of Contact = Maximum Depth-Displacement of Surface
h_c = h_max-h_s
This formula uses 3 Variables

Variables Used

Depth of Contact - (Measured in Meter) - The Depth of Contact is defined as the depth of penetration when the indenter is in contact with the sample.
Maximum Depth - (Measured in Meter) - The Maximum Depth is the highest possible depth quantity during indentation.
Displacement of Surface - (Measured in Meter) - The Displacement of Surface is simply the displacement of the surface on the perimeter of the contact due to elastic depression.

STEP 1: Convert Input(s) to Base Unit

Maximum Depth: 80 Nanometer --> 8E-08 Meter (Check conversion here)
Displacement of Surface: 50 Nanometer --> 5E-08 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_c = h_max-h_s --> 8E-08-5E-08

Evaluating ... ...

h_c = 3E-08

STEP 3: Convert Result to Output's Unit

3E-08 Meter -->30 Nanometer (Check conversion here)

FINAL ANSWER

30 Nanometer <-- Depth of Contact

(Calculation completed in 00.018 seconds)

You are here -

Home » Chemistry » Nanomaterials and Nanochemistry » Mechanical and Nanomechanical Properties » Depth of Contact using Maximum Depth and Displacement of Surface

Credits

Created by Abhijit gharphalia

national institute of technology meghalaya (NIT Meghalaya), Shillong

Abhijit gharphalia has created this Calculator and 50+ more calculators!

Verified by Soupayan banerjee

National University of Judicial Science (NUJS), Kolkata

Soupayan banerjee has verified this Calculator and 800+ more calculators!

< 8 Mechanical and Nanomechanical Properties Calculators

Displacement of Surface using Final Depth and Maximum Depth

Go Displacement of Surface = ((pi-2)/pi)*(Maximum Depth-Final Depth)

Maximum Depth using Final Depth and Displacement of Surface

Go Maximum Depth = ((pi*Displacement of Surface)/(pi-2))+Final Depth

Depth during Indentation using Displacement of Surface and Depth of Contact

Go Depth during Indentation = Displacement of Surface+Depth of Contact

Displacement of Surface using Depth during Indentation and Depth of Contact

Go Displacement of Surface = Depth during Indentation-Depth of Contact

Depth of Contact using Depth during Indentation and Displacement of Surface

Go Depth of Contact = Depth during Indentation-Displacement of Surface

Depth of Contact using Maximum Depth and Displacement of Surface

Go Depth of Contact = Maximum Depth-Displacement of Surface

Maximum Depth using Depth of Contact and Displacement of Surface

Go Maximum Depth = Depth of Contact+Displacement of Surface

Displacement of Surface using Maximum Depth and Depth of Contact

Go Displacement of Surface = Maximum Depth-Depth of Contact

Depth of Contact using Maximum Depth and Displacement of Surface Formula

Depth of Contact = Maximum Depth-Displacement of Surface
h_c = h_max-h_s

What is Vickers hardness test?

The Vickers hardness test was developed in 1921 by Robert L. Smith and George E. Sandland at Vickers Ltd as an alternative to the Brinell method to measure the hardness of materials.The Vickers test is often easier to use than other hardness tests since the required calculations are independent of the size of the indenter, and the indenter can be used for all materials irrespective of hardness.

How to Calculate Depth of Contact using Maximum Depth and Displacement of Surface?

Depth of Contact using Maximum Depth and Displacement of Surface calculator uses Depth of Contact = Maximum Depth-Displacement of Surface to calculate the Depth of Contact, The Depth of Contact using Maximum Depth and Displacement of Surface formula is defined as the subtracted value of the displacement of surface from the maximum depth. Depth of Contact is denoted by h_c symbol.

How to calculate Depth of Contact using Maximum Depth and Displacement of Surface using this online calculator? To use this online calculator for Depth of Contact using Maximum Depth and Displacement of Surface, enter Maximum Depth (h_max) & Displacement of Surface (h_s) and hit the calculate button. Here is how the Depth of Contact using Maximum Depth and Displacement of Surface calculation can be explained with given input values -> 3E+10 = 8E-08-5E-08.

FAQ

What is Depth of Contact using Maximum Depth and Displacement of Surface?

The Depth of Contact using Maximum Depth and Displacement of Surface formula is defined as the subtracted value of the displacement of surface from the maximum depth and is represented as h_c = h_max-h_s or Depth of Contact = Maximum Depth-Displacement of Surface. The Maximum Depth is the highest possible depth quantity during indentation & The Displacement of Surface is simply the displacement of the surface on the perimeter of the contact due to elastic depression.

How to calculate Depth of Contact using Maximum Depth and Displacement of Surface?

The Depth of Contact using Maximum Depth and Displacement of Surface formula is defined as the subtracted value of the displacement of surface from the maximum depth is calculated using Depth of Contact = Maximum Depth-Displacement of Surface. To calculate Depth of Contact using Maximum Depth and Displacement of Surface, you need Maximum Depth (h_max) & Displacement of Surface (h_s). With our tool, you need to enter the respective value for Maximum Depth & Displacement of Surface and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Depth of Contact?

In this formula, Depth of Contact uses Maximum Depth & Displacement of Surface. We can use 1 other way(s) to calculate the same, which is/are as follows -

Depth of Contact = Depth during Indentation-Displacement of Surface

Home

FREE PDFs

🔍 Search