Depth of Heavy Beams and Girders Calculator

Depth of Beam - (Measured in Meter) - Depth of Beam is the overall depth of the cross-section of the beam perpendicular to the axis of the beam.
Length of Span - (Measured in Meter) - Length of Span refers to the length of the opening above which the beam is spanning.

STEP 1: Convert Input(s) to Base Unit

Length of Span: 10.01 Meter --> 10.01 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

D_B = (I_n/12)+(I_n/10) --> (10.01/12)+(10.01/10)

Evaluating ... ...

D_B = 1.83516666666667

STEP 3: Convert Result to Output's Unit

1.83516666666667 Meter --> No Conversion Required

FINAL ANSWER

1.83516666666667 ≈ 1.835167 Meter <-- Depth of Beam

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Structural Engineering » Concrete Structures » Behaviour in Flexure » Analysis Using Working Stress Method » Singly Reinforced Sections » Singly Reinforced Rectangular Sections » Depth of Heavy Beams and Girders

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Mridul Sharma

Indian Institute of Information Technology (IIIT), Bhopal

Mridul Sharma has verified this Calculator and 1700+ more calculators!

< 9 Singly Reinforced Rectangular Sections Calculators

Moment Resistance of Steel given Steel Ratio

Go Moment Resistance of Steel = Tensile Stress in Steel*Steel Ratio*Ratio of Distance between Centroids*Width of Beam*(Effective Depth of Beam)^2

Stress in Steel given Cross-Sectional Reinforcing Tensile Area to Beam Area Ratio

Go Stress in Compressive Steel = Bending Moment/(Modular Ratio for Elastic Shortening*Constant j*Width of Beam*Depth of Beam^2)

Moment Resistance of Steel given Stress and Area

Go Moment Resistance of Steel = (Tensile Stress in Steel*Area of Steel required*Ratio of Distance between Centroids*Effective Depth of Beam)

Stress in Concrete

Go Stress in Concrete = 2*Bending Moment/(Constant k*Constant j*Width of Beam*Depth of Beam^2)

Stress in Steel

Go Stress in Compressive Steel = Moment in Structures/(Area of Tension Reinforcement*Constant j*Depth of Beam)

Bending Moment given Stress in Concrete

Go Bending Moment = (Stress in Concrete*Constant k*Width of Beam*Depth of Beam^2)/2

Depth of Heavy Beams and Girders

Go Depth of Beam = (Length of Span/12)+(Length of Span/10)

Depth of Roof and Floor Slabs

Go Depth of Beam = Length of Span/25

Depth of Light Beams

Go Depth of Beam = Length of Span/15

Depth of Heavy Beams and Girders Formula

Depth of Beam = (Length of Span/12)+(Length of Span/10)
D_B = (I_n/12)+(I_n/10)

Define Griders?

A girder is a support beam used in construction. It is the main horizontal support of a structure that supports smaller beams. Girders often have an I-beam cross-section composed of two load-bearing flanges separated by a stabilizing web, but may also have a box shape, Z shape, or other forms. A girder is commonly used to build bridges.

How to Calculate Depth of Heavy Beams and Girders?

Depth of Heavy Beams and Girders calculator uses Depth of Beam = (Length of Span/12)+(Length of Span/10) to calculate the Depth of Beam, The Depth of Heavy Beams and Girders formula is defined as the distance from the top or surface to the bottom of Heavy Beams and Girders. Depth of Beam is denoted by D_B symbol.

How to calculate Depth of Heavy Beams and Girders using this online calculator? To use this online calculator for Depth of Heavy Beams and Girders, enter Length of Span (I_n) and hit the calculate button. Here is how the Depth of Heavy Beams and Girders calculation can be explained with given input values -> 1.835167 = (10.01/12)+(10.01/10).

FAQ

What is Depth of Heavy Beams and Girders?

The Depth of Heavy Beams and Girders formula is defined as the distance from the top or surface to the bottom of Heavy Beams and Girders and is represented as D_B = (I_n/12)+(I_n/10) or Depth of Beam = (Length of Span/12)+(Length of Span/10). Length of Span refers to the length of the opening above which the beam is spanning.

How to calculate Depth of Heavy Beams and Girders?

The Depth of Heavy Beams and Girders formula is defined as the distance from the top or surface to the bottom of Heavy Beams and Girders is calculated using Depth of Beam = (Length of Span/12)+(Length of Span/10). To calculate Depth of Heavy Beams and Girders, you need Length of Span (I_n). With our tool, you need to enter the respective value for Length of Span and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Depth of Beam?

In this formula, Depth of Beam uses Length of Span. We can use 2 other way(s) to calculate the same, which is/are as follows -

Depth of Beam = Length of Span/25
Depth of Beam = Length of Span/15

Home

FREE PDFs

🔍 Search