Depth of Prism given Vertical Stress on Surface of Prism Solution

STEP 0: Pre-Calculation Summary
Formula Used
Depth of Prism = Vertical Stress at a Point in Pascal/(Unit Weight of Soil*cos((Angle of Inclination)))
z = σvertical/(γ*cos((I)))
This formula uses 1 Functions, 4 Variables
Functions Used
cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)
Variables Used
Depth of Prism - (Measured in Meter) - Depth of Prism is the length of prism along z direction.
Vertical Stress at a Point in Pascal - (Measured in Pascal) - Vertical Stress at a Point in Pascal is the stress acting perpendicular to the surface.
Unit Weight of Soil - (Measured in Kilonewton per Cubic Meter) - Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.
Angle of Inclination - (Measured in Radian) - Angle of Inclination is defined as the angle measured from the horizontal surface of the wall or any object.
STEP 1: Convert Input(s) to Base Unit
Vertical Stress at a Point in Pascal: 10 Pascal --> 10 Pascal No Conversion Required
Unit Weight of Soil: 18 Kilonewton per Cubic Meter --> 18 Kilonewton per Cubic Meter No Conversion Required
Angle of Inclination: 80 Degree --> 1.3962634015952 Radian (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
z = σvertical/(γ*cos((I))) --> 10/(18*cos((1.3962634015952)))
Evaluating ... ...
z = 3.19931693507501
STEP 3: Convert Result to Output's Unit
3.19931693507501 Meter --> No Conversion Required
FINAL ANSWER
3.19931693507501 3.199317 Meter <-- Depth of Prism
(Calculation completed in 00.020 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

23 Stability Analysis of Infinite Slopes in Prism Calculators

Unit Weight of Soil given Factor of Safety for Cohesive Soil
Go Unit Weight of Soil = Cohesion of Soil/((Factor of Safety-(tan((Angle of Internal Friction*pi)/180)/tan((Angle of Inclination*pi)/180)))*Depth of Prism*cos((Angle of Inclination*pi)/180)*sin((Angle of Inclination*pi)/180))
Cohesion given Factor of Safety for Cohesive Soil
Go Cohesion of Soil = (Factor of Safety-(tan((Angle of Internal Friction*pi)/180)/tan((Angle of Inclination*pi)/180)))*(Unit Weight of Soil*Depth of Prism*cos((Angle of Inclination*pi)/180)*sin((Angle of Inclination*pi)/180))
Depth of Prism given Factor of Safety for Cohesive Soil
Go Depth of Prism = Unit Cohesion/((Factor of Safety-(tan((Angle of Internal Friction of Soil))/tan((Angle of Inclination))))*Unit Weight of Soil*cos((Angle of Inclination))*sin((Angle of Inclination)))
Factor of Safety for Cohesive Soil given Cohesion
Go Factor of Safety = (Unit Cohesion/(Unit Weight of Soil*Depth of Prism*cos((Angle of Inclination))*sin((Angle of Inclination))))+(tan((Angle of Internal Friction of Soil))/tan((Angle of Inclination)))
Inclined Length along Slope given Weight of Soil Prism
Go Inclined Length = Weight of Prism/(Unit Weight of Soil*Depth of Prism*cos((Angle of Inclination)))
Unit Weight of Soil given Weight of Soil Prism
Go Unit Weight of Soil = Weight of Prism/(Depth of Prism*Inclined Length*cos((Angle of Inclination)))
Weight of Soil Prism in Stability Analysis
Go Weight of Prism = (Unit Weight of Soil*Depth of Prism*Inclined Length*cos((Angle of Inclination)))
Depth of Prism given Weight of Soil Prism
Go Depth of Prism = Weight of Prism/(Unit Weight of Soil*Inclined Length*cos((Angle of Inclination)))
Angle of Inclination given Weight of Soil Prism
Go Angle of Inclination = acos(Weight of Prism/(Unit Weight of Soil*Depth of Prism*Inclined Length))
Unit Weight of Soil given Vertical Stress on Surface of Prism
Go Unit Weight of Soil = Vertical Stress at a Point in Pascal/(Depth of Prism*cos((Angle of Inclination)))
Depth of Prism given Vertical Stress on Surface of Prism
Go Depth of Prism = Vertical Stress at a Point in Pascal/(Unit Weight of Soil*cos((Angle of Inclination)))
Angle of Inclination given Vertical Stress on Surface of Prism
Go Angle of Inclination = acos(Vertical Stress at a Point in Pascal/(Depth of Prism*Unit Weight of Soil))
Inclined Length along Slope given Volume Per Unit Length of Prism
Go Inclined Length = Volume per unit length of prism/(Depth of Prism*cos((Angle of Inclination)))
Depth of Prism given Volume per Unit Length of Prism
Go Depth of Prism = Volume per unit length of prism/(Inclined Length*cos((Angle of Inclination)))
Volume Per Unit Length of Prism
Go Volume per unit length of prism = (Depth of Prism*Inclined Length*cos((Angle of Inclination)))
Vertical Stress on Surface of Prism given Unit Weight of Soil
Go Vertical Stress at a Point = (Depth of Prism*Unit Weight of Soil*cos((Angle of Inclination)))
Angle of Inclination given Volume per Unit Length of Prism
Go Angle of Inclination = acos(Volume per unit length of prism/(Depth of Prism*Inclined Length))
Inclined Length along Slope given Horizontal Length of Prism
Go Inclined Length = Horizontal Length of Prism/cos((Angle of Inclination))
Horizontal Length of Prism
Go Horizontal Length of Prism = Inclined Length*cos((Angle of Inclination))
Angle of Inclination given Horizontal Length of Prism
Go Angle of Inclination = acos(Horizontal Length of Prism/Inclined Length)
Weight of Soil Prism given Vertical Stress on Surface of Prism
Go Weight of Prism = Vertical Stress at a Point in Pascal*Inclined Length
Inclined Length along Slope given Vertical Stress on Surface of Prism
Go Inclined Length = Weight of Prism/Vertical Stress at a Point*5
Vertical Stress on Surface of Prism
Go Vertical Stress at a Point = Weight of Prism/Inclined Length

Depth of Prism given Vertical Stress on Surface of Prism Formula

Depth of Prism = Vertical Stress at a Point in Pascal/(Unit Weight of Soil*cos((Angle of Inclination)))
z = σvertical/(γ*cos((I)))

What is Vertical Stress?

In other words the vertical stress (σv) and horizontal stress (σH) are principal stresses. The vertical stress on element A can be determined simply from the mass of the. overlying material.

How to Calculate Depth of Prism given Vertical Stress on Surface of Prism?

Depth of Prism given Vertical Stress on Surface of Prism calculator uses Depth of Prism = Vertical Stress at a Point in Pascal/(Unit Weight of Soil*cos((Angle of Inclination))) to calculate the Depth of Prism, The Depth of Prism given Vertical Stress on Surface of Prism is defined as the distance below the surface where vertical stress is applied to the prism. Depth of Prism is denoted by z symbol.

How to calculate Depth of Prism given Vertical Stress on Surface of Prism using this online calculator? To use this online calculator for Depth of Prism given Vertical Stress on Surface of Prism, enter Vertical Stress at a Point in Pascal vertical), Unit Weight of Soil (γ) & Angle of Inclination (I) and hit the calculate button. Here is how the Depth of Prism given Vertical Stress on Surface of Prism calculation can be explained with given input values -> 0.383918 = 10/(18000*cos((1.3962634015952))).

FAQ

What is Depth of Prism given Vertical Stress on Surface of Prism?
The Depth of Prism given Vertical Stress on Surface of Prism is defined as the distance below the surface where vertical stress is applied to the prism and is represented as z = σvertical/(γ*cos((I))) or Depth of Prism = Vertical Stress at a Point in Pascal/(Unit Weight of Soil*cos((Angle of Inclination))). Vertical Stress at a Point in Pascal is the stress acting perpendicular to the surface, Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil & Angle of Inclination is defined as the angle measured from the horizontal surface of the wall or any object.
How to calculate Depth of Prism given Vertical Stress on Surface of Prism?
The Depth of Prism given Vertical Stress on Surface of Prism is defined as the distance below the surface where vertical stress is applied to the prism is calculated using Depth of Prism = Vertical Stress at a Point in Pascal/(Unit Weight of Soil*cos((Angle of Inclination))). To calculate Depth of Prism given Vertical Stress on Surface of Prism, you need Vertical Stress at a Point in Pascal vertical), Unit Weight of Soil (γ) & Angle of Inclination (I). With our tool, you need to enter the respective value for Vertical Stress at a Point in Pascal, Unit Weight of Soil & Angle of Inclination and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Depth of Prism?
In this formula, Depth of Prism uses Vertical Stress at a Point in Pascal, Unit Weight of Soil & Angle of Inclination. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Depth of Prism = Weight of Prism/(Unit Weight of Soil*Inclined Length*cos((Angle of Inclination)))
  • Depth of Prism = Volume per unit length of prism/(Inclined Length*cos((Angle of Inclination)))
  • Depth of Prism = Unit Cohesion/((Factor of Safety-(tan((Angle of Internal Friction of Soil))/tan((Angle of Inclination))))*Unit Weight of Soil*cos((Angle of Inclination))*sin((Angle of Inclination)))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!