Calculator A to Z

Diameter of bolt in terms of leakage of fluid Calculator

Main CategoryPhysics ↺
PhysicsMachine Design ↺
Machine DesignPacking and seals ↺
Packing and sealsPackingless seals ↺
✖The Discharge through orifice is an opening, of any size or shape, in a pipe or at the bottom or side wall of a container (water tank, reservoir, etc.), through which fluid is discharged.ⓘ Discharge through orifice [Q]
+10%
-10%
✖The Radial Clearance can be calculated in many ways and is denoted by c symbol.ⓘ Radial Clearance [c]
+10%
-10%
✖Fluid pressure refers to the pressure exerted by both liquids and gas.ⓘ Fluid Pressure [p1
+10%
-10%
✖Fluid pressure refers to the pressure exerted by both liquids and gas.ⓘ Fluid Pressure [p2]
+10%
-10%
✖Depth of u collar is the distance from the top or surface to the bottom of u collar.ⓘ Depth of u collar [l]
+10%
-10%
✖The Viscosity of oil is considered in the viscous or laminar flow.ⓘ Viscosity of oil [μ]
+10%
-10%
✖Diameter of bolt is a chord that runs through the center point of the circle.ⓘ Diameter of bolt in terms of leakage of fluid [d]
⎘ Copy
👎
Formula
Reset
👍

Credits

sanjay shiva
national institute of technology hamirpur (NITH ), hamirpur , himachal pradesh
sanjay shiva has created this Calculator and 25+ more calculators!
Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 1600+ more calculators!

Diameter of bolt in terms of leakage of fluid Solution

STEP 0: Pre-Calculation Summary
Formula Used
diameter_of_bolt = (Discharge through orifice-(pi*(Radial Clearance^3)*(Fluid Pressure-Fluid Pressure)))*12*Depth of u collar*Viscosity of oil
d = (Q-(pi*(c^3)*(p1-p2)))*12*l*μ
This formula uses 1 Constants, 6 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Variables Used
Discharge through orifice - The Discharge through orifice is an opening, of any size or shape, in a pipe or at the bottom or side wall of a container (water tank, reservoir, etc.), through which fluid is discharged. (Measured in Meter³ per Second)
Radial Clearance - The Radial Clearance can be calculated in many ways and is denoted by c symbol. (Measured in Meter)
Fluid Pressure - Fluid pressure refers to the pressure exerted by both liquids and gas. (Measured in Pascal)
Fluid Pressure - Fluid pressure refers to the pressure exerted by both liquids and gas. (Measured in Pascal)
Depth of u collar - Depth of u collar is the distance from the top or surface to the bottom of u collar. (Measured in Meter)
Viscosity of oil - The Viscosity of oil is considered in the viscous or laminar flow. (Measured in Newton Second per Meter²)
STEP 1: Convert Input(s) to Base Unit
Discharge through orifice: 1 Meter³ per Second --> 1 Meter³ per Second No Conversion Required
Radial Clearance: 0.001 Meter --> 0.001 Meter No Conversion Required
Fluid Pressure: 20 Pascal --> 20 Pascal No Conversion Required
Fluid Pressure: 10 Pascal --> 10 Pascal No Conversion Required
Depth of u collar: 1 Meter --> 1 Meter No Conversion Required
Viscosity of oil: 0.1 Newton Second per Meter² --> 0.1 Pascal Second (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
d = (Q-(pi*(c^3)*(p1-p2)))*12*l*μ --> (1-(pi*(0.001^3)*(20-10)))*12*1*0.1
Evaluating ... ...
d = 1.19999996230089
STEP 3: Convert Result to Output's Unit
1.19999996230089 Meter --> No Conversion Required
FINAL ANSWER
1.19999996230089 Meter <-- Diameter of bolt
(Calculation completed in 00.051 seconds)
You are here

4 Packingless seals Calculators

Diameter of bolt in terms of leakage of fluid
diameter_of_bolt = (Discharge through orifice-(pi*(Radial Clearance^3)*(Fluid Pressure-Fluid Pressure)))*12*Depth of u collar*Viscosity of oil Go
Radial clearance in terms of leakage
radial_clearance = ((Discharge through orifice*12*Depth of u collar*Viscosity of oil)/(3.14*(Fluid Pressure-Fluid Pressure)*Diameter of bolt))^1/3 Go
Leakage of fluid past a rod
actual_discharge = 3.14*((Radial Clearance)^3)*(Fluid Pressure-Fluid Pressure)*Diameter of bolt/(Absolute Viscosity of Oil*Depth of u collar*12) Go
Depth of U collar in terms of leakage
depth_of_u_collar = 3.14*(Radial Clearance)^3*(Fluid Pressure-Fluid Pressure)*Diameter of bolt/(Absolute Viscosity of Oil*12*Actual discharge) Go

Diameter of bolt in terms of leakage of fluid Formula

diameter_of_bolt = (Discharge through orifice-(pi*(Radial Clearance^3)*(Fluid Pressure-Fluid Pressure)))*12*Depth of u collar*Viscosity of oil
d = (Q-(pi*(c^3)*(p1-p2)))*12*l*μ

What is Diameter of bolt?

Diameter of bolt is defined as chord that runs through the center point of the circle.a unit of linear measurement of magnifying power.

How to Calculate Diameter of bolt in terms of leakage of fluid?

Diameter of bolt in terms of leakage of fluid calculator uses diameter_of_bolt = (Discharge through orifice-(pi*(Radial Clearance^3)*(Fluid Pressure-Fluid Pressure)))*12*Depth of u collar*Viscosity of oil to calculate the Diameter of bolt, The Diameter of bolt in terms of leakage of fluid formula is defined as chord that runs through the center point of the circle. Diameter of bolt is denoted by d symbol.

How to calculate Diameter of bolt in terms of leakage of fluid using this online calculator? To use this online calculator for Diameter of bolt in terms of leakage of fluid, enter Discharge through orifice (Q), Radial Clearance (c), Fluid Pressure (p1, Fluid Pressure (p2), Depth of u collar (l) & Viscosity of oil (μ) and hit the calculate button. Here is how the Diameter of bolt in terms of leakage of fluid calculation can be explained with given input values -> 1.2 = (1-(pi*(0.001^3)*(20-10)))*12*1*0.1.

FAQ

What is Diameter of bolt in terms of leakage of fluid?
The Diameter of bolt in terms of leakage of fluid formula is defined as chord that runs through the center point of the circle and is represented as d = (Q-(pi*(c^3)*(p1-p2)))*12*l*μ or diameter_of_bolt = (Discharge through orifice-(pi*(Radial Clearance^3)*(Fluid Pressure-Fluid Pressure)))*12*Depth of u collar*Viscosity of oil. The Discharge through orifice is an opening, of any size or shape, in a pipe or at the bottom or side wall of a container (water tank, reservoir, etc.), through which fluid is discharged, The Radial Clearance can be calculated in many ways and is denoted by c symbol, Fluid pressure refers to the pressure exerted by both liquids and gas, Fluid pressure refers to the pressure exerted by both liquids and gas, Depth of u collar is the distance from the top or surface to the bottom of u collar & The Viscosity of oil is considered in the viscous or laminar flow.
How to calculate Diameter of bolt in terms of leakage of fluid?
The Diameter of bolt in terms of leakage of fluid formula is defined as chord that runs through the center point of the circle is calculated using diameter_of_bolt = (Discharge through orifice-(pi*(Radial Clearance^3)*(Fluid Pressure-Fluid Pressure)))*12*Depth of u collar*Viscosity of oil. To calculate Diameter of bolt in terms of leakage of fluid, you need Discharge through orifice (Q), Radial Clearance (c), Fluid Pressure (p1, Fluid Pressure (p2), Depth of u collar (l) & Viscosity of oil (μ). With our tool, you need to enter the respective value for Discharge through orifice, Radial Clearance, Fluid Pressure, Fluid Pressure, Depth of u collar & Viscosity of oil and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Diameter of bolt?
In this formula, Diameter of bolt uses Discharge through orifice, Radial Clearance, Fluid Pressure, Fluid Pressure, Depth of u collar & Viscosity of oil. We can use 4 other way(s) to calculate the same, which is/are as follows -
  • actual_discharge = 3.14*((Radial Clearance)^3)*(Fluid Pressure-Fluid Pressure)*Diameter of bolt/(Absolute Viscosity of Oil*Depth of u collar*12)
  • diameter_of_bolt = (Discharge through orifice-(pi*(Radial Clearance^3)*(Fluid Pressure-Fluid Pressure)))*12*Depth of u collar*Viscosity of oil
  • depth_of_u_collar = 3.14*(Radial Clearance)^3*(Fluid Pressure-Fluid Pressure)*Diameter of bolt/(Absolute Viscosity of Oil*12*Actual discharge)
  • radial_clearance = ((Discharge through orifice*12*Depth of u collar*Viscosity of oil)/(3.14*(Fluid Pressure-Fluid Pressure)*Diameter of bolt))^1/3
About | Contact | Disclaimer | Terms
© 2011-2022 A softusvista inc. venture!


Share Image
Let Others Know
✖
LinkedIn
Email
WhatsApp
Copied!