Diameter of Nail or Spike given Allowable Load per Inch of Penetration Solution

STEP 0: Pre-Calculation Summary
Formula Used
Diameter of Spike or Nail = Total Allowable Load for Nails or Spikes/(1380*(Specific Gravity of Wood Oven Dry)^(5/2))
Dspikes = Pnails/(1380*(G)^(5/2))
This formula uses 3 Variables
Variables Used
Diameter of Spike or Nail - (Measured in Meter) - Diameter of Spike or Nail in mm are pieces of soft iron or steel or other materials of variable lengths and thicknesses, pointed at one end and with a head at the other serving to join pieces.
Total Allowable Load for Nails or Spikes - (Measured in Newton) - Total Allowable Load for Nails or Spikes is the capacity or can say the maximum load allowed.
Specific Gravity of Wood Oven Dry - Specific gravity of wood oven dry, Specific gravity is the ratio of the density of a substance to the density of a given reference material.
STEP 1: Convert Input(s) to Base Unit
Total Allowable Load for Nails or Spikes: 2.5 Newton --> 2.5 Newton No Conversion Required
Specific Gravity of Wood Oven Dry: 0.265 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Dspikes = Pnails/(1380*(G)^(5/2)) --> 2.5/(1380*(0.265)^(5/2))
Evaluating ... ...
Dspikes = 0.0501125194048769
STEP 3: Convert Result to Output's Unit
0.0501125194048769 Meter -->50.1125194048769 Millimeter (Check conversion here)
FINAL ANSWER
50.1125194048769 50.11252 Millimeter <-- Diameter of Spike or Nail
(Calculation completed in 00.004 seconds)

Credits

Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verified by Himanshi Sharma
Bhilai Institute of Technology (BIT), Raipur
Himanshi Sharma has verified this Calculator and 800+ more calculators!

3 Nails and Spikes Calculators

Total Allowable Lateral Load for Nail or Spike
Go Total Allowable Load for Nails or Spikes = Coefficient Dependent on Group Number of Wood*(Diameter of Spike or Nail)^(3/2)
Diameter of Nail or Spike given Allowable Load per Inch of Penetration
Go Diameter of Spike or Nail = Total Allowable Load for Nails or Spikes/(1380*(Specific Gravity of Wood Oven Dry)^(5/2))
Allowable Load per Inch of Penetration into Member Receiving Point
Go Total Allowable Load for Nails or Spikes = 1380*(Specific Gravity of Wood Oven Dry^(5/2))*Diameter of Spike or Nail

Diameter of Nail or Spike given Allowable Load per Inch of Penetration Formula

Diameter of Spike or Nail = Total Allowable Load for Nails or Spikes/(1380*(Specific Gravity of Wood Oven Dry)^(5/2))
Dspikes = Pnails/(1380*(G)^(5/2))

What is allowable strength?

The Allowable Stress or Allowable Strength is the maximum stress (tensile, compressive or bending) that is allowed to be applied on a structural material.

What are wood screws?

Wood screws are handy for quickly building jigs and clamping forms, joining cabinet and furniture parts, mounting hardware and trim, and much more. Screws form strong connections between parts made from solid wood, plywood and other sheet goods without the need for cut joinery.

How to Calculate Diameter of Nail or Spike given Allowable Load per Inch of Penetration?

Diameter of Nail or Spike given Allowable Load per Inch of Penetration calculator uses Diameter of Spike or Nail = Total Allowable Load for Nails or Spikes/(1380*(Specific Gravity of Wood Oven Dry)^(5/2)) to calculate the Diameter of Spike or Nail, Diameter of Nail or Spike given Allowable Load per Inch of Penetration is defined by the parameters allowable load per inch (mm) of penetration into member receiving point, lb (N) and specific gravity of wood, oven dry. Diameter of Spike or Nail is denoted by Dspikes symbol.

How to calculate Diameter of Nail or Spike given Allowable Load per Inch of Penetration using this online calculator? To use this online calculator for Diameter of Nail or Spike given Allowable Load per Inch of Penetration, enter Total Allowable Load for Nails or Spikes (Pnails) & Specific Gravity of Wood Oven Dry (G) and hit the calculate button. Here is how the Diameter of Nail or Spike given Allowable Load per Inch of Penetration calculation can be explained with given input values -> 50112.52 = 2.5/(1380*(0.265)^(5/2)).

FAQ

What is Diameter of Nail or Spike given Allowable Load per Inch of Penetration?
Diameter of Nail or Spike given Allowable Load per Inch of Penetration is defined by the parameters allowable load per inch (mm) of penetration into member receiving point, lb (N) and specific gravity of wood, oven dry and is represented as Dspikes = Pnails/(1380*(G)^(5/2)) or Diameter of Spike or Nail = Total Allowable Load for Nails or Spikes/(1380*(Specific Gravity of Wood Oven Dry)^(5/2)). Total Allowable Load for Nails or Spikes is the capacity or can say the maximum load allowed & Specific gravity of wood oven dry, Specific gravity is the ratio of the density of a substance to the density of a given reference material.
How to calculate Diameter of Nail or Spike given Allowable Load per Inch of Penetration?
Diameter of Nail or Spike given Allowable Load per Inch of Penetration is defined by the parameters allowable load per inch (mm) of penetration into member receiving point, lb (N) and specific gravity of wood, oven dry is calculated using Diameter of Spike or Nail = Total Allowable Load for Nails or Spikes/(1380*(Specific Gravity of Wood Oven Dry)^(5/2)). To calculate Diameter of Nail or Spike given Allowable Load per Inch of Penetration, you need Total Allowable Load for Nails or Spikes (Pnails) & Specific Gravity of Wood Oven Dry (G). With our tool, you need to enter the respective value for Total Allowable Load for Nails or Spikes & Specific Gravity of Wood Oven Dry and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!