Diameter of Port given Projected Width of Valve Seat Solution

STEP 0: Pre-Calculation Summary
Formula Used
Diameter of Port = Projected Width of Valve Seat/0.06
dp = w/0.06
This formula uses 2 Variables
Variables Used
Diameter of Port - (Measured in Meter) - Diameter of Port is the diameter of the opening of the port of an IC Engine.
Projected Width of Valve Seat - (Measured in Meter) - Projected Width of Valve Seat is the projected width of the seat of the valve for a seat angle of 45 degrees and is perpendicular to valve length.
STEP 1: Convert Input(s) to Base Unit
Projected Width of Valve Seat: 3 Millimeter --> 0.003 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
dp = w/0.06 --> 0.003/0.06
Evaluating ... ...
dp = 0.05
STEP 3: Convert Result to Output's Unit
0.05 Meter -->50 Millimeter (Check conversion here)
FINAL ANSWER
50 Millimeter <-- Diameter of Port
(Calculation completed in 00.004 seconds)

Credits

Created by Saurabh Patil
Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
Verified by Ravi Khiyani
Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore
Ravi Khiyani has verified this Calculator and 300+ more calculators!

12 Valve Head Calculators

Diameter of Valve Head given Load on Exhaust Valve and Back Pressure
Go Diameter of Valve Head = sqrt((4*Gas Load on Exhaust Valve)/(pi*Back Pressure on Engine Valve))
Projected Width of Valve Seat given Diameter of Port and Diameter of Valve Head
Go Projected Width of Valve Seat = (Diameter of Valve Head-Diameter of Port)/2
Diameter of Valve Head given Diameter of Port and Projected Width of Valve Seat
Go Diameter of Valve Head = Diameter of Port+2*Projected Width of Valve Seat
Diameter of Port given Diameter of Valve Head and Projected Width of Valve Seat
Go Diameter of Port = Diameter of Valve Head-2*Projected Width of Valve Seat
Diameter of Valve Head given Projected Width of Valve Seat
Go Diameter of Valve Head = 18.666*Projected Width of Valve Seat
Projected Width of Valve Seat given Diameter of Valve Head
Go Projected Width of Valve Seat = Diameter of Valve Head/18.666
Minimum Projected Width of Valve Seat given Port Diameter
Go Projected Width of Valve Seat = 0.05*Diameter of Port
Maximum Projected Width of Valve Seat given Port Diameter
Go Projected Width of Valve Seat = 0.07*Diameter of Port
Diameter of Port given Projected Width of Valve Seat
Go Diameter of Port = Projected Width of Valve Seat/0.06
Projected Width of Valve Seat given Port Diameter
Go Projected Width of Valve Seat = 0.06*Diameter of Port
Diameter of Valve Head given Port Diameter
Go Diameter of Valve Head = 1.12*Diameter of Port
Port Diameter given Diameter of Valve Head
Go Diameter of Port = Diameter of Valve Head/1.12

Diameter of Port given Projected Width of Valve Seat Formula

Diameter of Port = Projected Width of Valve Seat/0.06
dp = w/0.06

Valve function in engine

The machine elements with a vital role in the operation of internal combustion engines are the engine valves. They serve for opening and closing the inlet port for fresh gases in the combustion chamber (intake valves) and output for the combustion gases (exhaust valves).

How to Calculate Diameter of Port given Projected Width of Valve Seat?

Diameter of Port given Projected Width of Valve Seat calculator uses Diameter of Port = Projected Width of Valve Seat/0.06 to calculate the Diameter of Port, The Diameter of Port given Projected Width of Valve Seat is the diameter of the opening of the port of an IC Engine. Diameter of Port is denoted by dp symbol.

How to calculate Diameter of Port given Projected Width of Valve Seat using this online calculator? To use this online calculator for Diameter of Port given Projected Width of Valve Seat, enter Projected Width of Valve Seat (w) and hit the calculate button. Here is how the Diameter of Port given Projected Width of Valve Seat calculation can be explained with given input values -> 50000 = 0.003/0.06.

FAQ

What is Diameter of Port given Projected Width of Valve Seat?
The Diameter of Port given Projected Width of Valve Seat is the diameter of the opening of the port of an IC Engine and is represented as dp = w/0.06 or Diameter of Port = Projected Width of Valve Seat/0.06. Projected Width of Valve Seat is the projected width of the seat of the valve for a seat angle of 45 degrees and is perpendicular to valve length.
How to calculate Diameter of Port given Projected Width of Valve Seat?
The Diameter of Port given Projected Width of Valve Seat is the diameter of the opening of the port of an IC Engine is calculated using Diameter of Port = Projected Width of Valve Seat/0.06. To calculate Diameter of Port given Projected Width of Valve Seat, you need Projected Width of Valve Seat (w). With our tool, you need to enter the respective value for Projected Width of Valve Seat and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Diameter of Port?
In this formula, Diameter of Port uses Projected Width of Valve Seat. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Diameter of Port = Diameter of Valve Head-2*Projected Width of Valve Seat
  • Diameter of Port = Diameter of Valve Head/1.12
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!