## Credits

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2600+ more calculators!

## Diameter of rod of cotter joint given spigot collar diameter Solution

STEP 0: Pre-Calculation Summary
Formula Used
Diameter of rod = Diameter of Spigot Collar/1.5
d = d3/1.5
This formula uses 1 Variables
Variables Used
Diameter of Spigot Collar - Diameter of spigot collar is defined as diameter of collar of the spigot of a cotter joint. (Measured in Millimeter)
STEP 1: Convert Input(s) to Base Unit
Diameter of Spigot Collar: 55 Millimeter --> 0.055 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
d = d3/1.5 --> 0.055/1.5
Evaluating ... ...
d = 0.0366666666666667
STEP 3: Convert Result to Output's Unit
0.0366666666666667 Meter -->36.6666666666667 Millimeter (Check conversion here)
36.6666666666667 Millimeter <-- Diameter of rod
(Calculation completed in 00.016 seconds)

## < 10+ Design of Cotter Joint Calculators

Width of cotter by bending consideration
Mean Width of Cotter = (((3*Load/(Thickness of cotter*Bending Stress in Cotter))*((Diameter of Spigot/4)+((Diameter of Socket Collar-Diameter of Spigot)/6))))^0.5 Go
Maximum load taken by cotter joint given spigot diameter, thickness and stress
Load = (((pi/4)*(Diameter of Spigot)^2)-(Diameter of Spigot*Thickness of cotter))*Permissible tensile stress Go
Minimum Rod diameter in cotter joint given axial tensile force and stress
Diameter of rod = sqrt((4*Axial tensile or compressive force)/(Permissible tensile stress*pi)) Go
Minimum Diameter of spigot in cotter joint subjected to crushing stress
Diameter of Spigot = Axial tensile or compressive force/(Crushing stress induced in cotter*Thickness of cotter) Go
Width of cotter by shear consideration
Mean Width of Cotter = Shear Force on Section/(2*Allowable shear stress*Thickness of cotter) Go
Load taken by cotter joint rod given tensile stress in rod
Load = (pi*(Diameter of rod^2)*Tensile Stress In Rod)/4 Go
Tensile stress in rod of cotter joint
Tensile Stress In Rod = (4*Load)/(pi*Diameter of rod^2) Go
Thickness of spigot collar when rod diameter is available
Thickness of Spigot Collar = 0.45*Diameter of rod Go
Diameter of spigot collar given rod diameter
Diameter of Spigot Collar = 1.5*Diameter of rod Go
Diameter of socket collar given rod diameter
Diameter of Socket Collar = 2.4*Diameter of rod Go

### Diameter of rod of cotter joint given spigot collar diameter Formula

Diameter of rod = Diameter of Spigot Collar/1.5
d = d3/1.5

## Sleeve and Cotter Joint

The sleeve and cotter joint is a type of joint used to typically connect two similar coaxial cylindrical rods. It includes a sleeve and two wedge-shaped tapered cotters. Appropriate slots are cut in the sleeve and in the cylindrical rods.
Rectangular rods and dissimilar cylindrical rods cannot be connected using this joint. A sleeve and cotter joints do not allow angular misalignment between its cylindrical members. It cannot connect cylindrical members which undergo rotation.

## How to Calculate Diameter of rod of cotter joint given spigot collar diameter?

Diameter of rod of cotter joint given spigot collar diameter calculator uses Diameter of rod = Diameter of Spigot Collar/1.5 to calculate the Diameter of rod, Diameter of rod of cotter joint given spigot collar diameter is the diameter of the end rod of the cotter joint. Diameter of rod is denoted by d symbol.

How to calculate Diameter of rod of cotter joint given spigot collar diameter using this online calculator? To use this online calculator for Diameter of rod of cotter joint given spigot collar diameter, enter Diameter of Spigot Collar (d3) and hit the calculate button. Here is how the Diameter of rod of cotter joint given spigot collar diameter calculation can be explained with given input values -> 36.66667 = 0.055/1.5.

### FAQ

What is Diameter of rod of cotter joint given spigot collar diameter?
Diameter of rod of cotter joint given spigot collar diameter is the diameter of the end rod of the cotter joint and is represented as d = d3/1.5 or Diameter of rod = Diameter of Spigot Collar/1.5. Diameter of spigot collar is defined as diameter of collar of the spigot of a cotter joint.
How to calculate Diameter of rod of cotter joint given spigot collar diameter?
Diameter of rod of cotter joint given spigot collar diameter is the diameter of the end rod of the cotter joint is calculated using Diameter of rod = Diameter of Spigot Collar/1.5. To calculate Diameter of rod of cotter joint given spigot collar diameter, you need Diameter of Spigot Collar (d3). With our tool, you need to enter the respective value for Diameter of Spigot Collar and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Diameter of rod?
In this formula, Diameter of rod uses Diameter of Spigot Collar. We can use 4 other way(s) to calculate the same, which is/are as follows -
• Diameter of rod = sqrt((4*Axial tensile or compressive force)/(Permissible tensile stress*pi))
• Diameter of rod = Thickness of cotter/(0.31)
• Diameter of rod = Diameter of Socket Collar/2.4
• Diameter of rod = Thickness of Spigot Collar/(0.45) Let Others Know