Diameter of Socket Collar given Rod Diameter Solution

STEP 0: Pre-Calculation Summary
Formula Used
Diameter of Socket Collar = 2.4*Diameter of Rod of Cotter Joint
d4 = 2.4*d
This formula uses 2 Variables
Variables Used
Diameter of Socket Collar - (Measured in Meter) - Diameter of socket collar is the external diameter of collar of the socket of a cotter joint.
Diameter of Rod of Cotter Joint - (Measured in Meter) - Diameter of Rod of Cotter Joint is defined as the length of the longest chord passing across the rod of a cotter joint end.
STEP 1: Convert Input(s) to Base Unit
Diameter of Rod of Cotter Joint: 31 Millimeter --> 0.031 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
d4 = 2.4*d --> 2.4*0.031
Evaluating ... ...
d4 = 0.0744
STEP 3: Convert Result to Output's Unit
0.0744 Meter -->74.4 Millimeter (Check conversion here)
FINAL ANSWER
74.4 Millimeter <-- Diameter of Socket Collar
(Calculation completed in 00.004 seconds)

Credits

Created by Saurabh Patil
Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
Vishwakarma Institute of Information Technology, Pune (VIIT Pune), Pune
Abhishek Dharmendra Bansile has verified this Calculator and 10+ more calculators!

25 Joint Geometry and Dimensions Calculators

Thickness of Cotter given Tensile Stress in Socket
Go Thickness of Cotter = ((pi/4*(Outside Diameter of Socket^2-Diameter of Spigot^2))-(Load at Cotter Joint)/Tensile Stress In Socket)/(Outside Diameter of Socket-Diameter of Spigot)
Width of Cotter by Bending Consideration
Go Mean Width of Cotter = (3*Load on Cotter Joint/(Thickness of Cotter*Bending Stress in Cotter)*(Diameter of Spigot/4+(Diameter of Socket Collar-Diameter of Spigot)/6))^0.5
Thickness of Cotter Joint given Bending Stress in Cotter
Go Thickness of Cotter = (2*Diameter of Socket Collar+Diameter of Spigot)*((Load on Cotter Joint)/(4*Mean Width of Cotter^2*Bending Stress in Cotter))
Diameter of Socket Collar of Cotter Joint given Bending Stress in Cotter
Go Diameter of Socket Collar = (4*Mean Width of Cotter^2*Bending Stress in Cotter*(Thickness of Cotter)/Load on Cotter Joint-Diameter of Spigot)/2
Diameter of Spigot of Cotter Joint given Bending Stress in Cotter
Go Diameter of Spigot = 4*Mean Width of Cotter^2*Bending Stress in Cotter*(Thickness of Cotter)/Load on Cotter Joint-2*Diameter of Socket Collar
Inside Diameter of Socket of Cotter Joint given Shear Stress in Socket
Go Diameter of Spigot = Diameter of Socket Collar-(Load on Cotter Joint)/(2*Axial Distance From Slot to End of Socket Collar*Shear Stress in Socket)
Diameter of socket collar of cotter joint given shear stress in socket
Go Diameter of Socket Collar = (Load on Cotter Joint)/(2*Axial Distance From Slot to End of Socket Collar*Shear Stress in Socket)+Diameter of Spigot
Thickness of Cotter given Compressive Stress in Socket
Go Thickness of Cotter = (Load on Cotter Joint)/((Diameter of Socket Collar-Diameter of Spigot)*Compressive Stress In Socket)
Diameter of Socket Collar of Cotter Joint given Compressive Stress
Go Diameter of Socket Collar = Diameter of Spigot+(Load on Cotter Joint)/(Thickness of Cotter*Compressive Stress in Spigot)
Diameter of Spigot of Cotter Joint given Compressive Stress
Go Diameter of Spigot = Diameter of Socket Collar-(Load on Cotter Joint)/(Thickness of Cotter*Compressive Stress in Spigot)
Minimum Rod Diameter in Cotter Joint given Axial Tensile Force and Stress
Go Diameter of Rod of Cotter Joint = sqrt((4*Load on Cotter Joint)/(Tensile Stress in Cotter Joint Rod*pi))
Cross Section Area of Spigot of Cotter Joint Prone to Failure
Go Cross Sectional Area of Spigot = (pi*Diameter of Spigot^2)/4-Diameter of Spigot*Thickness of Cotter
Diameter of Spigot of Cotter Joint given Shear Stress in Spigot
Go Diameter of Spigot = (Load on Cotter Joint)/(2*Gap between End of Slot to End of Spigot*Shear Stress in Spigot)
Minimum Diameter of Spigot in Cotter Joint Subjected to Crushing Stress
Go Diameter of Spigot = Load on Cotter Joint/(Crushing Stress induced in Cotter*Thickness of Cotter)
Thickness of Cotter given Compressive Stress in Spigot
Go Thickness of Cotter = (Load on Cotter Joint)/(Compressive Stress in Spigot*Diameter of Spigot)
Thickness of Cotter given Shear Stress in Cotter
Go Thickness of Cotter = (Load on Cotter Joint)/(2*Shear Stress in Cotter*Mean Width of Cotter)
Width of Cotter by Shear Consideration
Go Mean Width of Cotter = Shear Force on Cotter/(2*Shear Stress in Cotter*Thickness of Cotter)
Diameter of Rod of Cotter Joint given Thickness of Spigot Collar
Go Diameter of Rod of Cotter Joint = Thickness of Spigot Collar/(0.45)
Thickness of Spigot Collar when Rod Diameter is Available
Go Thickness of Spigot Collar = 0.45*Diameter of Rod of Cotter Joint
Diameter of Rod of Cotter Joint given Spigot Collar Diameter
Go Diameter of Rod of Cotter Joint = Diameter of Spigot Collar/1.5
Diameter of Rod of Cotter Joint given Socket Collar Diameter
Go Diameter of Rod of Cotter Joint = Diameter of Socket Collar/2.4
Diameter of Spigot Collar given Rod Diameter
Go Diameter of Spigot Collar = 1.5*Diameter of Rod of Cotter Joint
Diameter of Socket Collar given Rod Diameter
Go Diameter of Socket Collar = 2.4*Diameter of Rod of Cotter Joint
Diameter of Rod of Cotter Joint given Thickness of Cotter
Go Diameter of Rod of Cotter Joint = Thickness of Cotter/(0.31)
Thickness of Cotter Joint
Go Thickness of Cotter = 0.31*Diameter of Rod of Cotter Joint

Diameter of Socket Collar given Rod Diameter Formula

Diameter of Socket Collar = 2.4*Diameter of Rod of Cotter Joint
d4 = 2.4*d

What is a socket in cotter joint?

A cotter joint, also known as a socket and spigot joint, is a method of temporarily joining two coaxial rods. One rod is fitted with a spigot, which fits inside a socket on one end of the other rod. Slots in the socket and the spigot align so that a cotter can be inserted to lock the two rods together.

How to Calculate Diameter of Socket Collar given Rod Diameter?

Diameter of Socket Collar given Rod Diameter calculator uses Diameter of Socket Collar = 2.4*Diameter of Rod of Cotter Joint to calculate the Diameter of Socket Collar, The Diameter of socket collar given rod diameter formula is defined as diameter of collar of the socket of a cotter joint. Diameter of Socket Collar is denoted by d4 symbol.

How to calculate Diameter of Socket Collar given Rod Diameter using this online calculator? To use this online calculator for Diameter of Socket Collar given Rod Diameter, enter Diameter of Rod of Cotter Joint (d) and hit the calculate button. Here is how the Diameter of Socket Collar given Rod Diameter calculation can be explained with given input values -> 74400 = 2.4*0.031.

FAQ

What is Diameter of Socket Collar given Rod Diameter?
The Diameter of socket collar given rod diameter formula is defined as diameter of collar of the socket of a cotter joint and is represented as d4 = 2.4*d or Diameter of Socket Collar = 2.4*Diameter of Rod of Cotter Joint. Diameter of Rod of Cotter Joint is defined as the length of the longest chord passing across the rod of a cotter joint end.
How to calculate Diameter of Socket Collar given Rod Diameter?
The Diameter of socket collar given rod diameter formula is defined as diameter of collar of the socket of a cotter joint is calculated using Diameter of Socket Collar = 2.4*Diameter of Rod of Cotter Joint. To calculate Diameter of Socket Collar given Rod Diameter, you need Diameter of Rod of Cotter Joint (d). With our tool, you need to enter the respective value for Diameter of Rod of Cotter Joint and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Diameter of Socket Collar?
In this formula, Diameter of Socket Collar uses Diameter of Rod of Cotter Joint. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Diameter of Socket Collar = (Load on Cotter Joint)/(2*Axial Distance From Slot to End of Socket Collar*Shear Stress in Socket)+Diameter of Spigot
  • Diameter of Socket Collar = Diameter of Spigot+(Load on Cotter Joint)/(Thickness of Cotter*Compressive Stress in Spigot)
  • Diameter of Socket Collar = (4*Mean Width of Cotter^2*Bending Stress in Cotter*(Thickness of Cotter)/Load on Cotter Joint-Diameter of Spigot)/2
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!