Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir Calculator

✖New Total Depth of Reservoir is the depth where water is collected and kept in quantity for use.ⓘ New Total Depth of Reservoir [D]			+10% -10%
✖Height above Bed is the elevation from surface of zero elevation to which heights of various points are referenced.ⓘ Height above Bed [h_o]			+10% -10%

✖Difference in the Elevation (FRL and Original bed) of the reservoir is the depth of the reservoir at the Full Reservoir Level (FRL).ⓘ Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir [H]

⎘ Copy

👎

Formula

✖

Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir

Formula

`"H" = "D"+"h"_{"o"}`

Example

`"11m"="9m"+"2m"`

Calculator

LaTeX

Reset

👍

Download Prediction of Sediment Distribution Formulas PDF

Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir Solution

STEP 0: Pre-Calculation Summary

Formula Used

Difference in the Elevation (FRL and Original bed) = New Total Depth of Reservoir+Height above Bed
H = D+h_o
This formula uses 3 Variables

Variables Used

Difference in the Elevation (FRL and Original bed) - (Measured in Meter) - Difference in the Elevation (FRL and Original bed) of the reservoir is the depth of the reservoir at the Full Reservoir Level (FRL).
New Total Depth of Reservoir - (Measured in Meter) - New Total Depth of Reservoir is the depth where water is collected and kept in quantity for use.
Height above Bed - (Measured in Meter) - Height above Bed is the elevation from surface of zero elevation to which heights of various points are referenced.

STEP 1: Convert Input(s) to Base Unit

New Total Depth of Reservoir: 9 Meter --> 9 Meter No Conversion Required
Height above Bed: 2 Meter --> 2 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

H = D+h_o --> 9+2

Evaluating ... ...

H = 11

STEP 3: Convert Result to Output's Unit

11 Meter --> No Conversion Required

FINAL ANSWER

11 Meter <-- Difference in the Elevation (FRL and Original bed)

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Erosion and Reservoir Sedimentation » Prediction of Sediment Distribution » Empirical Area Reduction Method » Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< 11 Empirical Area Reduction Method Calculators

Volume of Sediment Deposited between two Consecutive Heights by Weighted Area Method

Go Volume of Sediment Deposit = (Cross-Sectional Area at Point 1+Cross-Sectional Area at Point 2+sqrt(Cross-Sectional Area at Point 1*Cross-Sectional Area at Point 2))*(Change in Head Between the Points/3)

Relative Area for Different Type Classification of Reservoir

Go Dimensionless Relative Area = Coefficient c*(Relative Depth^Coefficient m1)*(1-Relative Depth)^Coefficient n1

Volume of Sediment Deposition given Incremental Area

Go Volume of Sediment Deposit = 0.5*((Cross-Sectional Area at Point 1+Cross-Sectional Area at Point 2)*Change in Head Between the Points)

Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method

Go Volume of Sediment Deposit = (Cross-Sectional Area at Point 1+Cross-Sectional Area at Point 2)*(Change in Head Between the Points/2)

Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir

Go Difference in the Elevation (FRL and Original bed) = New Total Depth of Reservoir+Height above Bed

New Total Depth of Reservoir

Go New Total Depth of Reservoir = Difference in the Elevation (FRL and Original bed)-Height above Bed

Difference in Elevations of Full Reservoir Level and Original Bed of Reservoir

Go Difference in the Elevation (FRL and Original bed) = Height above Bed/Relative Depth

Height up to which Sediment Completely Fills up given New Relative Depth

Go Height above Bed = Relative Depth*Difference in the Elevation (FRL and Original bed)

Relative Depth at New Zero Elevation

Go Relative Depth = Height above Bed/Difference in the Elevation (FRL and Original bed)

Relative Area given Soil Erodibility Factor

Go Dimensionless Relative Area = Sediment Area/Soil Erodibility Factor

Sediment Area at any Height above Datum

Go Sediment Area = Dimensionless Relative Area*Soil Erodibility Factor

Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir Formula

Difference in the Elevation (FRL and Original bed) = New Total Depth of Reservoir+Height above Bed
H = D+h_o

What is a Reservoir?

A Reservoir is an artificial lake where water is stored. Most reservoirs are formed by constructing dams across rivers. A reservoir can also be formed from a natural lake whose outlet has been dammed to control the water level. The dam controls the amount of water that flows out of the reservoir.

How to Calculate Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir?

Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir calculator uses Difference in the Elevation (FRL and Original bed) = New Total Depth of Reservoir+Height above Bed to calculate the Difference in the Elevation (FRL and Original bed), The Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir formula is defined as the difference equals to the depth of the reservoir at level (FRL). Difference in the Elevation (FRL and Original bed) is denoted by H symbol.

How to calculate Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir using this online calculator? To use this online calculator for Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir, enter New Total Depth of Reservoir (D) & Height above Bed (h_o) and hit the calculate button. Here is how the Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir calculation can be explained with given input values -> 11 = 9+2.

FAQ

What is Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir?

The Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir formula is defined as the difference equals to the depth of the reservoir at level (FRL) and is represented as H = D+h_o or Difference in the Elevation (FRL and Original bed) = New Total Depth of Reservoir+Height above Bed. New Total Depth of Reservoir is the depth where water is collected and kept in quantity for use & Height above Bed is the elevation from surface of zero elevation to which heights of various points are referenced.

How to calculate Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir?

The Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir formula is defined as the difference equals to the depth of the reservoir at level (FRL) is calculated using Difference in the Elevation (FRL and Original bed) = New Total Depth of Reservoir+Height above Bed. To calculate Difference in Elevations and Original Bed of Reservoir given New Total Depth of Reservoir, you need New Total Depth of Reservoir (D) & Height above Bed (h_o). With our tool, you need to enter the respective value for New Total Depth of Reservoir & Height above Bed and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Difference in the Elevation (FRL and Original bed)?

In this formula, Difference in the Elevation (FRL and Original bed) uses New Total Depth of Reservoir & Height above Bed. We can use 1 other way(s) to calculate the same, which is/are as follows -

Difference in the Elevation (FRL and Original bed) = Height above Bed/Relative Depth

Home

FREE PDFs

🔍 Search