Distance from Antenna 2 to Target in Monopulse Radar Calculator

Engineering Chemistry Financial Health More >>

↳

Electronics Chemical Engineering Civil Electrical More >>

⤿

Radar System Amplifiers Analog Communications Analog Electronics More >>

⤿

Special Purpose Radars Radar and Antenna Specifications Radar Antennas Reception

✖Range refers to the distance between the radar antenna (or the radar system) and a target or object that reflects the radar signal.ⓘ Range [R_o]			+10% -10%
✖Distance between Antennas in Monopulse Radar is the distance between the two antennas mounted on the phase comparison Monopulse Radar.ⓘ Distance between Antennas in Monopulse Radar [s_a]			+10% -10%
✖Angle in Monopulse Radar refers to the direction or angle of arrival (AoA) of a target relative to the radar system.ⓘ Angle in Monopulse Radar [θ]			+10% -10%

✖Distance from Antenna 2 to Target in Monopulse Radar is defined as the distance of antenna from the target in the radar system.ⓘ Distance from Antenna 2 to Target in Monopulse Radar [s₂]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Special Purpose Radars Formulas PDF

Distance from Antenna 2 to Target in Monopulse Radar Solution

STEP 0: Pre-Calculation Summary

Formula Used

Distance from Antenna 2 to Target = (Range-Distance between Antennas in Monopulse Radar)/2*sin(Angle in Monopulse Radar)
s₂ = (R_o-s_a)/2*sin(θ)
This formula uses 1 Functions, 4 Variables

Functions Used

sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)

Variables Used

Distance from Antenna 2 to Target - (Measured in Meter) - Distance from Antenna 2 to Target in Monopulse Radar is defined as the distance of antenna from the target in the radar system.
Range - (Measured in Meter) - Range refers to the distance between the radar antenna (or the radar system) and a target or object that reflects the radar signal.
Distance between Antennas in Monopulse Radar - (Measured in Meter) - Distance between Antennas in Monopulse Radar is the distance between the two antennas mounted on the phase comparison Monopulse Radar.
Angle in Monopulse Radar - (Measured in Radian) - Angle in Monopulse Radar refers to the direction or angle of arrival (AoA) of a target relative to the radar system.

STEP 1: Convert Input(s) to Base Unit

Range: 40000 Meter --> 40000 Meter No Conversion Required
Distance between Antennas in Monopulse Radar: 0.45 Meter --> 0.45 Meter No Conversion Required
Angle in Monopulse Radar: 60 Degree --> 1.0471975511964 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

s₂ = (R_o-s_a)/2*sin(θ) --> (40000-0.45)/2*sin(1.0471975511964)

Evaluating ... ...

s₂ = 17320.3132199709

STEP 3: Convert Result to Output's Unit

17320.3132199709 Meter --> No Conversion Required

FINAL ANSWER

17320.3132199709 ≈ 17320.31 Meter <-- Distance from Antenna 2 to Target

(Calculation completed in 00.010 seconds)

You are here -

Home » Engineering » Electronics » Radar System » Special Purpose Radars » Distance from Antenna 2 to Target in Monopulse Radar

Credits

Created by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has created this Calculator and 900+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Special Purpose Radars Calculators

Amplitude of Signal Received from Target at Range

LaTeX Go Amplitude of Signal Received = Echo Signal Voltage/(sin((2*pi*(Carrier Frequency+Doppler Frequency Shift)*Time Period)-((4*pi*Carrier Frequency*Range)/[c])))

Amplitude of Reference Signal

LaTeX Go Amplitude of Reference Signal = CW Oscillator Reference Voltage/(sin(2*pi*Angular Frequency*Time Period))

Reference Voltage of CW Oscillator

LaTeX Go CW Oscillator Reference Voltage = Amplitude of Reference Signal*sin(2*pi*Angular Frequency*Time Period)

Doppler Frequency Shift

LaTeX Go Doppler Frequency Shift = (2*Target Velocity)/Wavelength

Distance from Antenna 2 to Target in Monopulse Radar Formula

LaTeX Go

Distance from Antenna 2 to Target = (Range-Distance between Antennas in Monopulse Radar)/2*sin(Angle in Monopulse Radar)
s₂ = (R_o-s_a)/2*sin(θ)

How does the Frequency of Radar affect Measurement?

A higher frequency provides a more concentrated narrow beam which can be useful in applications where there are obstacles present in the tank such as many-ways, agitators or heating coils.

How to Calculate Distance from Antenna 2 to Target in Monopulse Radar?

Distance from Antenna 2 to Target in Monopulse Radar calculator uses Distance from Antenna 2 to Target = (Range-Distance between Antennas in Monopulse Radar)/2*sin(Angle in Monopulse Radar) to calculate the Distance from Antenna 2 to Target, The Distance from Antenna 2 to Target in Monopulse Radar formula is the distance between one of the 2 antennas in the monopulse radar and target as multiple antennas are employed to provide improved angular resolution and tracking accuracy of a target. Distance from Antenna 2 to Target is denoted by s₂ symbol.

How to calculate Distance from Antenna 2 to Target in Monopulse Radar using this online calculator? To use this online calculator for Distance from Antenna 2 to Target in Monopulse Radar, enter Range (R_o), Distance between Antennas in Monopulse Radar (s_a) & Angle in Monopulse Radar (θ) and hit the calculate button. Here is how the Distance from Antenna 2 to Target in Monopulse Radar calculation can be explained with given input values -> 17320.31 = (40000-0.45)/2*sin(1.0471975511964).

FAQ

What is Distance from Antenna 2 to Target in Monopulse Radar?

The Distance from Antenna 2 to Target in Monopulse Radar formula is the distance between one of the 2 antennas in the monopulse radar and target as multiple antennas are employed to provide improved angular resolution and tracking accuracy of a target and is represented as s₂ = (R_o-s_a)/2*sin(θ) or Distance from Antenna 2 to Target = (Range-Distance between Antennas in Monopulse Radar)/2*sin(Angle in Monopulse Radar). Range refers to the distance between the radar antenna (or the radar system) and a target or object that reflects the radar signal, Distance between Antennas in Monopulse Radar is the distance between the two antennas mounted on the phase comparison Monopulse Radar & Angle in Monopulse Radar refers to the direction or angle of arrival (AoA) of a target relative to the radar system.

How to calculate Distance from Antenna 2 to Target in Monopulse Radar?

The Distance from Antenna 2 to Target in Monopulse Radar formula is the distance between one of the 2 antennas in the monopulse radar and target as multiple antennas are employed to provide improved angular resolution and tracking accuracy of a target is calculated using Distance from Antenna 2 to Target = (Range-Distance between Antennas in Monopulse Radar)/2*sin(Angle in Monopulse Radar). To calculate Distance from Antenna 2 to Target in Monopulse Radar, you need Range (R_o), Distance between Antennas in Monopulse Radar (s_a) & Angle in Monopulse Radar (θ). With our tool, you need to enter the respective value for Range, Distance between Antennas in Monopulse Radar & Angle in Monopulse Radar and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Spanish French German Russian Italian Portuguese Polish Dutch

Home FREE PDFs

🔍 Search