Distance from Extreme Fiber given Young's Modulus along with Radius and Stress Induced Solution

STEP 0: Pre-Calculation Summary
Formula Used
Distance from Neutral Axis = (Radius of Curvature*Fibre Stress at Distance ‘y’ from NA)/Young's Modulus
y = (Rcurvature*σy)/E
This formula uses 4 Variables
Variables Used
Distance from Neutral Axis - (Measured in Meter) - Distance from Neutral Axis is measured between N.A. and the extreme point.
Radius of Curvature - (Measured in Meter) - The Radius of Curvature is the reciprocal of the curvature.
Fibre Stress at Distance ‘y’ from NA - (Measured in Megapascal) - Fibre Stress at Distance ‘y’ from NA is denoted by σ.
Young's Modulus - (Measured in Megapascal) - Young's Modulus is a mechanical property of linear elastic solid substances. It describes the relationship between longitudinal stress and longitudinal strain.
STEP 1: Convert Input(s) to Base Unit
Radius of Curvature: 152 Millimeter --> 0.152 Meter (Check conversion here)
Fibre Stress at Distance ‘y’ from NA: 3289.474 Megapascal --> 3289.474 Megapascal No Conversion Required
Young's Modulus: 20000 Megapascal --> 20000 Megapascal No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
y = (Rcurvaturey)/E --> (0.152*3289.474)/20000
Evaluating ... ...
y = 0.0250000024
STEP 3: Convert Result to Output's Unit
0.0250000024 Meter -->25.0000024 Millimeter (Check conversion here)
FINAL ANSWER
25.0000024 25 Millimeter <-- Distance from Neutral Axis
(Calculation completed in 00.004 seconds)

Credits

Created by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has created this Calculator and 1300+ more calculators!
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

19 Combined Axial and Bending Loads Calculators

Neutral Axis to Outermost Fiber Distance given Maximum Stress for Short Beams
Go Distance from Neutral Axis = ((Maximum Stress*Cross Sectional Area*Area Moment of Inertia)-(Axial Load*Area Moment of Inertia))/(Maximum Bending Moment*Cross Sectional Area)
Maximum Stress in Short Beams for Large Deflection
Go Maximum Stress = (Axial Load/Cross Sectional Area)+(((Maximum Bending Moment+Axial Load*Deflection of Beam)*Distance from Neutral Axis)/Area Moment of Inertia)
Neutral Axis Moment of Inertia given Maximum Stress for Short Beams
Go Area Moment of Inertia = (Maximum Bending Moment*Cross Sectional Area*Distance from Neutral Axis)/((Maximum Stress*Cross Sectional Area)-(Axial Load))
Axial Load given Maximum Stress for Short Beams
Go Axial Load = Cross Sectional Area*(Maximum Stress -((Maximum Bending Moment*Distance from Neutral Axis)/Area Moment of Inertia))
Maximum Bending Moment given Maximum Stress for Short Beams
Go Maximum Bending Moment = ((Maximum Stress-(Axial Load/Cross Sectional Area))*Area Moment of Inertia)/Distance from Neutral Axis
Cross-Sectional Area given Maximum Stress for Short Beams
Go Cross Sectional Area = Axial Load/(Maximum Stress-((Maximum Bending Moment*Distance from Neutral Axis)/Area Moment of Inertia))
Maximum Stress for Short Beams
Go Maximum Stress = (Axial Load/Cross Sectional Area)+((Maximum Bending Moment*Distance from Neutral Axis)/Area Moment of Inertia)
Young's Modulus given Distance from Extreme Fiber along with Radius and Stress Induced
Go Young's Modulus = ((Radius of Curvature*Fibre Stress at Distance ‘y’ from NA)/Distance from Neutral Axis)
Stress Induced with known Distance from Extreme Fiber, Young's Modulus and Radius of curvature
Go Fibre Stress at Distance ‘y’ from NA = (Young's Modulus*Distance from Neutral Axis)/Radius of Curvature
Distance from Extreme Fiber given Young's Modulus along with Radius and Stress Induced
Go Distance from Neutral Axis = (Radius of Curvature*Fibre Stress at Distance ‘y’ from NA)/Young's Modulus
Deflection for Transverse Loading given Deflection for Axial Bending
Go Deflection for Transverse Loading Alone = Deflection of Beam*(1-(Axial Load/Critical Buckling Load))
Deflection for Axial Compression and Bending
Go Deflection of Beam = Deflection for Transverse Loading Alone/(1-(Axial Load/Critical Buckling Load))
Distance from Extreme Fiber given Moment of Resistance and Moment of Inertia along with Stress
Go Distance from Neutral Axis = (Area Moment of Inertia*Bending Stress)/Moment of Resistance
Moment of Inertia given Moment of Resistance, Stress induced and Distance from Extreme Fiber
Go Area Moment of Inertia = (Distance from Neutral Axis*Moment of Resistance)/Bending Stress
Stress Induced using Moment of Resistance, Moment of Inertia and Distance from Extreme Fiber
Go Bending Stress = (Distance from Neutral Axis*Moment of Resistance)/Area Moment of Inertia
Moment of Resistance in Bending Equation
Go Moment of Resistance = (Area Moment of Inertia*Bending Stress)/Distance from Neutral Axis
Young's Modulus using Moment of Resistance, Moment of Inertia and Radius
Go Young's Modulus = (Moment of Resistance*Radius of Curvature)/Area Moment of Inertia
Moment of Resistance given Young's Modulus, Moment of Inertia and Radius
Go Moment of Resistance = (Area Moment of Inertia*Young's Modulus)/Radius of Curvature
Moment of Inertia given Young's Modulus, Moment of Resistance and Radius
Go Area Moment of Inertia = (Moment of Resistance*Radius of Curvature)/Young's Modulus

Distance from Extreme Fiber given Young's Modulus along with Radius and Stress Induced Formula

Distance from Neutral Axis = (Radius of Curvature*Fibre Stress at Distance ‘y’ from NA)/Young's Modulus
y = (Rcurvature*σy)/E

What is Simple Bending?

The Bending will be called as simple bending when it occurs because of beam self-load and external load. This type of bending is also known as ordinary bending and in this type of bending results both shear stress and normal stress in the beam.

Define Stress.

Stress is a physical quantity that expresses the internal forces that neighbouring particles of a continuous material exert on each other, while strain is the measure of the deformation of the material. Thus, Stress is defined as “The restoring force per unit area of the material”. It is a tensor quantity. Denoted by the Greek letter σ. Measured using Pascal or N/m2.

How to Calculate Distance from Extreme Fiber given Young's Modulus along with Radius and Stress Induced?

Distance from Extreme Fiber given Young's Modulus along with Radius and Stress Induced calculator uses Distance from Neutral Axis = (Radius of Curvature*Fibre Stress at Distance ‘y’ from NA)/Young's Modulus to calculate the Distance from Neutral Axis, The Distance from Extreme Fiber given Young's Modulus along with Radius and Stress Induced formula is defined as the distance of the extreme fiber from the neutral axis when the beam is undergoing simple bending. Distance from Neutral Axis is denoted by y symbol.

How to calculate Distance from Extreme Fiber given Young's Modulus along with Radius and Stress Induced using this online calculator? To use this online calculator for Distance from Extreme Fiber given Young's Modulus along with Radius and Stress Induced, enter Radius of Curvature (Rcurvature), Fibre Stress at Distance ‘y’ from NA y) & Young's Modulus (E) and hit the calculate button. Here is how the Distance from Extreme Fiber given Young's Modulus along with Radius and Stress Induced calculation can be explained with given input values -> 0.025 = (0.152*3289474000)/20000000000.

FAQ

What is Distance from Extreme Fiber given Young's Modulus along with Radius and Stress Induced?
The Distance from Extreme Fiber given Young's Modulus along with Radius and Stress Induced formula is defined as the distance of the extreme fiber from the neutral axis when the beam is undergoing simple bending and is represented as y = (Rcurvaturey)/E or Distance from Neutral Axis = (Radius of Curvature*Fibre Stress at Distance ‘y’ from NA)/Young's Modulus. The Radius of Curvature is the reciprocal of the curvature, Fibre Stress at Distance ‘y’ from NA is denoted by σ & Young's Modulus is a mechanical property of linear elastic solid substances. It describes the relationship between longitudinal stress and longitudinal strain.
How to calculate Distance from Extreme Fiber given Young's Modulus along with Radius and Stress Induced?
The Distance from Extreme Fiber given Young's Modulus along with Radius and Stress Induced formula is defined as the distance of the extreme fiber from the neutral axis when the beam is undergoing simple bending is calculated using Distance from Neutral Axis = (Radius of Curvature*Fibre Stress at Distance ‘y’ from NA)/Young's Modulus. To calculate Distance from Extreme Fiber given Young's Modulus along with Radius and Stress Induced, you need Radius of Curvature (Rcurvature), Fibre Stress at Distance ‘y’ from NA y) & Young's Modulus (E). With our tool, you need to enter the respective value for Radius of Curvature, Fibre Stress at Distance ‘y’ from NA & Young's Modulus and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Distance from Neutral Axis?
In this formula, Distance from Neutral Axis uses Radius of Curvature, Fibre Stress at Distance ‘y’ from NA & Young's Modulus. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Distance from Neutral Axis = ((Maximum Stress*Cross Sectional Area*Area Moment of Inertia)-(Axial Load*Area Moment of Inertia))/(Maximum Bending Moment*Cross Sectional Area)
  • Distance from Neutral Axis = (Area Moment of Inertia*Bending Stress)/Moment of Resistance
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!