Drawdown in aquifer given well efficiency Solution

STEP 0: Pre-Calculation Summary
Formula Used
Change in Drawdown = Well Efficiency*Drawdown Inside the Well
s = E*st
This formula uses 3 Variables
Variables Used
Change in Drawdown - (Measured in Meter) - Change in Drawdown in the Aquifer is a term applied to the maximum lowering of the groundwater table caused by pumping or artesian flow.
Well Efficiency - Well Efficiency can be defined as the ratio of the drawdown in the aquifer at the radius of the pumping well to the drawdown inside the well .
Drawdown Inside the Well - (Measured in Meter) - Drawdown Inside the Well at the radius of the pumping well is a change in groundwater level due to an applied stress.
STEP 1: Convert Input(s) to Base Unit
Well Efficiency: 1.11 --> No Conversion Required
Drawdown Inside the Well: 9 Meter --> 9 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
s = E*st --> 1.11*9
Evaluating ... ...
s = 9.99
STEP 3: Convert Result to Output's Unit
9.99 Meter --> No Conversion Required
FINAL ANSWER
9.99 Meter <-- Change in Drawdown
(Calculation completed in 00.004 seconds)

Credits

Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verified by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has verified this Calculator and 1700+ more calculators!

6 Well Efficiency Calculators

Well Efficiency
Go Well Efficiency = (Change in Drawdown/Drawdown Inside the Well)*100
Drawdown Inside well given well efficiency
Go Drawdown Inside the Well = Change in Drawdown/Well Efficiency
Drawdown in aquifer given well efficiency
Go Change in Drawdown = Well Efficiency*Drawdown Inside the Well
Pumping Rate given Specific Capacity
Go Pumping Rate = Specific Capacity*Drawdown Inside the Well
Drawdown given Specific Capacity
Go Drawdown Inside the Well = Pumping Rate/Specific Capacity
Specific Capacity
Go Specific Capacity = Pumping Rate/Drawdown Inside the Well

Drawdown in aquifer given well efficiency Formula

Change in Drawdown = Well Efficiency*Drawdown Inside the Well
s = E*st

What is Well Efficiency?

Well efficiency can be defined as the ratio of the drawdown in the aquifer at the radius of the pumping well to the drawdown inside the well .

What is an aquifer?

An aquifer is an underground layer of water-bearing permeable rock, rock fractures or unconsolidated materials. Groundwater from aquifers can be extracted using a water well. The study of water flow in aquifers and the characterization of aquifers is called hydrogeology

How to Calculate Drawdown in aquifer given well efficiency?

Drawdown in aquifer given well efficiency calculator uses Change in Drawdown = Well Efficiency*Drawdown Inside the Well to calculate the Change in Drawdown, The Drawdown in aquifer given well efficiency (not in Percentage) is the product of well efficiency and drawdown inside the well which is the reduction in hydraulic head observed at a well in an aquifer. Change in Drawdown is denoted by s symbol.

How to calculate Drawdown in aquifer given well efficiency using this online calculator? To use this online calculator for Drawdown in aquifer given well efficiency, enter Well Efficiency (E) & Drawdown Inside the Well (st) and hit the calculate button. Here is how the Drawdown in aquifer given well efficiency calculation can be explained with given input values -> 9.99 = 1.11*9.

FAQ

What is Drawdown in aquifer given well efficiency?
The Drawdown in aquifer given well efficiency (not in Percentage) is the product of well efficiency and drawdown inside the well which is the reduction in hydraulic head observed at a well in an aquifer and is represented as s = E*st or Change in Drawdown = Well Efficiency*Drawdown Inside the Well. Well Efficiency can be defined as the ratio of the drawdown in the aquifer at the radius of the pumping well to the drawdown inside the well & Drawdown Inside the Well at the radius of the pumping well is a change in groundwater level due to an applied stress.
How to calculate Drawdown in aquifer given well efficiency?
The Drawdown in aquifer given well efficiency (not in Percentage) is the product of well efficiency and drawdown inside the well which is the reduction in hydraulic head observed at a well in an aquifer is calculated using Change in Drawdown = Well Efficiency*Drawdown Inside the Well. To calculate Drawdown in aquifer given well efficiency, you need Well Efficiency (E) & Drawdown Inside the Well (st). With our tool, you need to enter the respective value for Well Efficiency & Drawdown Inside the Well and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!