Drawdown in aquifer for total drawdown Calculator

✖Total Drawdown is the reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.ⓘ Total Drawdown [s_t]			+10% -10%
✖Well loss is defined as the head loss in well.ⓘ Well loss [CQⁿ]			+10% -10%

✖Change in Drawdown in the Aquifer is a term applied to the maximum lowering of the groundwater table caused by pumping or artesian flow.ⓘ Drawdown in aquifer for total drawdown [s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Engineering Hydrology Formula PDF PDF Image

Drawdown in aquifer for total drawdown Solution

STEP 0: Pre-Calculation Summary

Formula Used

Change in Drawdown = Total Drawdown-Well loss
s = s_t-CQⁿ
This formula uses 3 Variables

Variables Used

Change in Drawdown - (Measured in Meter) - Change in Drawdown in the Aquifer is a term applied to the maximum lowering of the groundwater table caused by pumping or artesian flow.
Total Drawdown - (Measured in Meter) - Total Drawdown is the reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.
Well loss - (Measured in Meter) - Well loss is defined as the head loss in well.

STEP 1: Convert Input(s) to Base Unit

Total Drawdown: 5.1 Meter --> 5.1 Meter No Conversion Required
Well loss: 5 Meter --> 5 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

s = s_t-CQⁿ --> 5.1-5

Evaluating ... ...

s = 0.0999999999999996

STEP 3: Convert Result to Output's Unit

0.0999999999999996 Meter --> No Conversion Required

FINAL ANSWER

0.0999999999999996 ≈ 0.1 Meter <-- Change in Drawdown

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Single Well Tests » Drawdown in aquifer for total drawdown

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Single Well Tests Calculators

Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics

LaTeX Go Total Drawdown = Factors related to Hydraulic Characteristics*Pumping Rate+(Factors related to Characteristics of the Well*Pumping Rate^2)

Drawdown in aquifer for total drawdown

LaTeX Go Change in Drawdown = Total Drawdown-Well loss

Total Drawdown in Pumping Well

LaTeX Go Total Drawdown = Change in Drawdown+Well loss

Well Loss for Total Drawdown

LaTeX Go Well loss = Total Drawdown-Change in Drawdown

Drawdown in aquifer for total drawdown Formula

LaTeX Go

Change in Drawdown = Total Drawdown-Well loss
s = s_t-CQⁿ

What is Water Well Drawdown?

Drawdown is a change in groundwater level due to an applied stress, caused by events such as: Pumping from a well. Pumping from a neighboring well. Intensive water taking from local area. Seasonal declines as recharge rates lower

What is an aquifer?

An aquifer is an underground layer of water-bearing permeable rock, rock fractures or unconsolidated materials. Groundwater from aquifers can be extracted using a water well. The study of water flow in aquifers and the characterization of aquifers is called hydrogeology.

How to Calculate Drawdown in aquifer for total drawdown?

Drawdown in aquifer for total drawdown calculator uses Change in Drawdown = Total Drawdown-Well loss to calculate the Change in Drawdown, The Drawdown in aquifer for total drawdown is a term applied to the maximum lowering of the groundwater table caused by pumping or artesian flow. Change in Drawdown is denoted by s symbol.

How to calculate Drawdown in aquifer for total drawdown using this online calculator? To use this online calculator for Drawdown in aquifer for total drawdown, enter Total Drawdown (s_t) & Well loss (CQⁿ) and hit the calculate button. Here is how the Drawdown in aquifer for total drawdown calculation can be explained with given input values -> 0.1 = 5.1-5.

FAQ

What is Drawdown in aquifer for total drawdown?

The Drawdown in aquifer for total drawdown is a term applied to the maximum lowering of the groundwater table caused by pumping or artesian flow and is represented as s = s_t-CQⁿ or Change in Drawdown = Total Drawdown-Well loss. Total Drawdown is the reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test & Well loss is defined as the head loss in well.

How to calculate Drawdown in aquifer for total drawdown?

The Drawdown in aquifer for total drawdown is a term applied to the maximum lowering of the groundwater table caused by pumping or artesian flow is calculated using Change in Drawdown = Total Drawdown-Well loss. To calculate Drawdown in aquifer for total drawdown, you need Total Drawdown (s_t) & Well loss (CQⁿ). With our tool, you need to enter the respective value for Total Drawdown & Well loss and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search