Dry Density of Soil in Sand Cone Method Calculator

✖Bulk Density of Soil is the ratio of total mass of soil to total volume.ⓘ Bulk Density of Soil [γ_t]			+10% -10%
✖Percent Moisture tell us about the moisture content of soil at field.ⓘ Percent Moisture [M]			+10% -10%

✖Dry Density is the ratio of mass of dry soil to its volume.ⓘ Dry Density of Soil in Sand Cone Method [ρ_d]

⎘ Copy

👎

Formula

✖

Dry Density of Soil in Sand Cone Method

Formula

`"ρ"_{"d"} = ("γ"_{"t"}/(1+("M"/100)))`

Example

`"11.99556kg/m³"=("12kg/m³"/(1+("0.037"/100)))`

Calculator

LaTeX

Reset

👍

Download Geotechnical Engineering Formula PDF PDF Image

Dry Density of Soil in Sand Cone Method Solution

STEP 0: Pre-Calculation Summary

Formula Used

Dry Density = (Bulk Density of Soil/(1+(Percent Moisture/100)))
ρ_d = (γ_t/(1+(M/100)))
This formula uses 3 Variables

Variables Used

Dry Density - (Measured in Kilogram per Cubic Meter) - Dry Density is the ratio of mass of dry soil to its volume.
Bulk Density of Soil - (Measured in Kilogram per Cubic Meter) - Bulk Density of Soil is the ratio of total mass of soil to total volume.
Percent Moisture - Percent Moisture tell us about the moisture content of soil at field.

STEP 1: Convert Input(s) to Base Unit

Bulk Density of Soil: 12 Kilogram per Cubic Meter --> 12 Kilogram per Cubic Meter No Conversion Required
Percent Moisture: 0.037 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ρ_d = (γ_t/(1+(M/100))) --> (12/(1+(0.037/100)))

Evaluating ... ...

ρ_d = 11.9955616421924

STEP 3: Convert Result to Output's Unit

11.9955616421924 Kilogram per Cubic Meter --> No Conversion Required

FINAL ANSWER

11.9955616421924 ≈ 11.99556 Kilogram per Cubic Meter <-- Dry Density

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Compaction of Soil » Soil Compaction Test » Dry Density of Soil in Sand Cone Method

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 24 Soil Compaction Test Calculators

Cross-sectional Area of Soil Conveying Flow given Rate of Flow of Water

Go Cross Sectional Area in Permeability = (Rate of Flow of Water through Soil/(Coefficient of Permeability*Hydraulic Gradient in Soil))

Coefficient of Permeability given Rate of Flow of Water

Go Coefficient of Permeability = (Rate of Flow of Water through Soil/(Hydraulic Gradient in Soil*Cross Sectional Area in Permeability))

Hydraulic Gradient given Rate of Flow of Water

Go Hydraulic Gradient in Soil = (Rate of Flow of Water through Soil/(Coefficient of Permeability*Cross Sectional Area in Permeability))

Rate of Flow of Water through Saturated Soil by Darcy's Law

Go Rate of Flow of Water through Soil = (Coefficient of Permeability*Hydraulic Gradient in Soil*Cross Sectional Area in Permeability)

Settlement of Plate in Load Bearing Test

Go Settlement of Plate = Settlement Foundation*((1+Width of Full Size Bearing Plate)/(2*Width of Full Size Bearing Plate))^2

Width of Full Size Bearing Plate in Load Bearing Test

Go Width of Full Size Bearing Plate = (1/(2*sqrt(Settlement of Plate/Settlement Foundation)-1))

Weight of Moist Soil given Percent Moisture in Sand Cone Method

Go Weight of Moist Soil = ((Percent Moisture*Weight of Dry Soil/100)+Weight of Dry Soil)

Percent Moisture in Sand Cone Method

Go Percent Moisture = (100*(Weight of Moist Soil-Weight of Dry Soil))/Weight of Dry Soil

Force per Unit Area Required for Penetration of Standard Material given CBR

Go Force Per Unit Area Stand. = (Force per Unit Area/California Bearing Ratio)

California Bearing Ratio for Strength of Soil that Underlies Pavement

Go California Bearing Ratio = (Force per Unit Area/Force Per Unit Area Stand.)

Force per Unit Area Required to Penetrate Soil Mass with Circular Piston given CBR

Go Force per Unit Area = California Bearing Ratio*Force Per Unit Area Stand.

Weight of Dry Soil given Percent Moisture in Sand Cone Method

Go Weight of Dry Soil = (100*Weight of Moist Soil)/(Percent Moisture+100)

Field Density of Soil given Dry Density of Soil in Sand Cone Method

Go Bulk Density of Soil = (Dry Density*(1+(Percent Moisture/100)))

Dry Density of Soil in Sand Cone Method

Go Dry Density = (Bulk Density of Soil/(1+(Percent Moisture/100)))

Percent Moisture Content given Dry Density of Soil in Sand Cone Method

Go Percent Moisture = 100*((Bulk Density of Soil/Dry Density)-1)

Weight of Soil given Field Density in Sand Cone Method

Go Weight of Total Soil = (Bulk Density of Soil*Volume of Soil)

Volume of Soil given Field Density in Sand Cone Method

Go Volume of Soil = (Weight of Total Soil/Bulk Density of Soil)

Field Density in Sand Cone Method

Go Bulk Density of Soil = (Weight of Total Soil/Volume of Soil)

Dry Density of Soil given Percent Compaction of Soil in Sand Cone Method

Go Dry Density = (Percent Compaction*Dry Density Maximum)/100

Percent Compaction of Soil in Sand Cone Method

Go Percent Compaction = (100*Dry Density)/Dry Density Maximum

Weight of Sand Filling Hole given Volume of Soil for Sand Filling in Sand Cone Method

Go Weight of Total Soil = (Volume of Soil*Density of Sand)

Density of Sand given Volume of Soil for Sand Filling in Sand Cone Method

Go Density of Sand = (Weight of Total Soil/Volume of Soil)

Volume of Soil for Sand Filling in Sand Cone Method

Go Volume of Soil = (Weight of Total Soil/Density of Sand)

Maximum Dry Density given Percent Compaction of Soil in Sand Cone Method

Go Dry Density Maximum = (Dry Density)/Percent Compaction

Dry Density of Soil in Sand Cone Method Formula

Dry Density = (Bulk Density of Soil/(1+(Percent Moisture/100)))
ρ_d = (γ_t/(1+(M/100)))

What is Dry Density of Soil?

Dry density is calculated by dividing the weight of the wet soil by its water content in percent. The percent compaction for the field density test is calculated by dividing the dry density of the soil by the maximum dry density from the proctor test.

How to Calculate Dry Density of Soil in Sand Cone Method?

Dry Density of Soil in Sand Cone Method calculator uses Dry Density = (Bulk Density of Soil/(1+(Percent Moisture/100))) to calculate the Dry Density, The Dry Density of Soil in Sand Cone Method is defined as the weight of the wet soil by its water content in percent. Dry Density is denoted by ρ_d symbol.

How to calculate Dry Density of Soil in Sand Cone Method using this online calculator? To use this online calculator for Dry Density of Soil in Sand Cone Method, enter Bulk Density of Soil (γ_t) & Percent Moisture (M) and hit the calculate button. Here is how the Dry Density of Soil in Sand Cone Method calculation can be explained with given input values -> 11.9403 = (12/(1+(0.037/100))).

FAQ

What is Dry Density of Soil in Sand Cone Method?

The Dry Density of Soil in Sand Cone Method is defined as the weight of the wet soil by its water content in percent and is represented as ρ_d = (γ_t/(1+(M/100))) or Dry Density = (Bulk Density of Soil/(1+(Percent Moisture/100))). Bulk Density of Soil is the ratio of total mass of soil to total volume & Percent Moisture tell us about the moisture content of soil at field.

How to calculate Dry Density of Soil in Sand Cone Method?

The Dry Density of Soil in Sand Cone Method is defined as the weight of the wet soil by its water content in percent is calculated using Dry Density = (Bulk Density of Soil/(1+(Percent Moisture/100))). To calculate Dry Density of Soil in Sand Cone Method, you need Bulk Density of Soil (γ_t) & Percent Moisture (M). With our tool, you need to enter the respective value for Bulk Density of Soil & Percent Moisture and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Dry Density?

In this formula, Dry Density uses Bulk Density of Soil & Percent Moisture. We can use 1 other way(s) to calculate the same, which is/are as follows -

Dry Density = (Percent Compaction*Dry Density Maximum)/100

Home

FREE PDFs

🔍 Search