Dynamic Pressure Head-Pitot Tube Calculator

✖Fluid velocity is the volume of fluid flowing in the given vessel per unit cross sectional area.ⓘ Fluid Velocity [u_Fluid]			+10% -10%
✖The Acceleration Due To Gravity is acceleration gained by an object because of gravitational force.ⓘ Acceleration Due To Gravity [g]			+10% -10%

✖Dynamic Pressure head is the distance between the static pressure head and the stagnation pressure head.ⓘ Dynamic Pressure Head-Pitot Tube [h_d]

⎘ Copy

👎

Formula

✖

Dynamic Pressure Head-Pitot Tube

Formula

`"h"_{"d"} = ("u"_{"Fluid"}^(2))/(2*"g")`

Example

`"761.8796cm"=(("12.22m/s")^(2))/(2*"9.8m/s²")`

Calculator

LaTeX

Reset

👍

Download Fluid Mechanics Formula PDF PDF Image

Dynamic Pressure Head-Pitot Tube Solution

STEP 0: Pre-Calculation Summary

Formula Used

Dynamic Pressure Head = (Fluid Velocity^(2))/(2*Acceleration Due To Gravity)
h_d = (u_Fluid^(2))/(2*g)
This formula uses 3 Variables

Variables Used

Dynamic Pressure Head - (Measured in Meter) - Dynamic Pressure head is the distance between the static pressure head and the stagnation pressure head.
Fluid Velocity - (Measured in Meter per Second) - Fluid velocity is the volume of fluid flowing in the given vessel per unit cross sectional area.
Acceleration Due To Gravity - (Measured in Meter per Square Second) - The Acceleration Due To Gravity is acceleration gained by an object because of gravitational force.

STEP 1: Convert Input(s) to Base Unit

Fluid Velocity: 12.22 Meter per Second --> 12.22 Meter per Second No Conversion Required
Acceleration Due To Gravity: 9.8 Meter per Square Second --> 9.8 Meter per Square Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_d = (u_Fluid^(2))/(2*g) --> (12.22^(2))/(2*9.8)

Evaluating ... ...

h_d = 7.61879591836735

STEP 3: Convert Result to Output's Unit

7.61879591836735 Meter -->761.879591836735 Centimeter (Check conversion here)

FINAL ANSWER

761.879591836735 ≈ 761.8796 Centimeter <-- Dynamic Pressure Head

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Fluid Mechanics » Pressure Relations » Dynamic Pressure Head-Pitot Tube

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Team Softusvista

Softusvista Office (Pune), India

Team Softusvista has verified this Calculator and 1100+ more calculators!

< 25 Pressure Relations Calculators

Depth of Centroid given Center of Pressure

Go Depth of Centroid = (Center of Pressure*Surface area+sqrt((Center of Pressure*Surface area)^2+4*Surface area*Moment of Inertia))/(2*Surface area)

Center of Pressure on Inclined Plane

Go Center of Pressure = Depth of Centroid+(Moment of Inertia*sin(Angle)*sin(Angle))/(Wet Surface Area*Depth of Centroid)

Differential Pressure-Differential Manometer

Go Pressure Changes = Specific weight 2*Height of Column 2+Specific Weight of Manometer liquid*Height of Manometer Liquid-Specific Weight 1*Height of Column 1

Area of Surface Wetted given Center of Pressure

Go Wet Surface Area = Moment of Inertia/((Center of Pressure-Depth of Centroid)*Depth of Centroid)

Height of Fluid 1 given Differential Pressure between Two Points

Go Height of Column 1 = (Pressure Changes+Specific weight 2*Height of Column 2)/Specific Weight 1

Height of Fluid 2 given Differential Pressure between Two Points

Go Height of Column 2 = (Specific Weight 1*Height of Column 1-Pressure Changes)/Specific weight 2

Moment of Inertia of Centroid given Center of Pressure

Go Moment of Inertia = (Center of Pressure-Depth of Centroid)*Wet Surface Area*Depth of Centroid

Center of Pressure

Go Center of Pressure = Depth of Centroid+Moment of Inertia/(Wet Surface Area*Depth of Centroid)

Differential Pressure between Two Points

Go Pressure Changes = Specific Weight 1*Height of Column 1-Specific weight 2*Height of Column 2

Angle of Inclined Manometer given Pressure at Point

Go Angle = asin(Pressure on Point/Specific Weight 1*Length of Inclined Manometer)

Length of Inclined Manometer

Go Length of Inclined Manometer = Pressure a/(Specific Weight 1*sin(Angle))

Pressure using Inclined Manometer

Go Pressure a = Specific Weight 1*Length of Inclined Manometer*sin(Angle)

Absolute Pressure at Height h

Go Absolute pressure = Atmospheric pressure+Specific weight of liquids*Height Absolute

Height of Liquid given its Absolute Pressure

Go Height Absolute = (Absolute pressure-Atmospheric pressure)/Specific Weight

Pressure Wave Velocity in Fluids

Go Velocity of pressure wave = sqrt(Bulk Modulus/Mass Density)

Velocity of Fluid given Dynamic Pressure

Go Fluid Velocity = sqrt(Dynamic Pressure*2/Liquid Density)

Dynamic Pressure Head-Pitot Tube

Go Dynamic Pressure Head = (Fluid Velocity^(2))/(2*Acceleration Due To Gravity)

Diameter of Soap Bubble

Go Diameter of Droplet = (8*Surface Tensions)/Pressure Changes

Surface Tension of Liquid Drop given Change in Pressure

Go Surface Tensions = Pressure Changes*Diameter of Droplet/4

Diameter of Droplet given Change in Pressure

Go Diameter of Droplet = 4*Surface Tensions/Pressure Changes

Mass Density given Velocity of Pressure Wave

Go Mass Density = Bulk Modulus/(Velocity of pressure wave^2)

Surface Tension of Soap Bubble

Go Surface Tensions = Pressure Changes*Diameter of Droplet/8

Dynamic Pressure of Fluid

Go Dynamic Pressure = (Liquid Density*Fluid Velocity^(2))/2

Bulk Modulus given Velocity of Pressure Wave

Go Bulk Modulus = Velocity of pressure wave^2*Mass Density

Density of Liquid given Dynamic Pressure

Go Liquid Density = 2*Dynamic Pressure/(Fluid Velocity^2)

Dynamic Pressure Head-Pitot Tube Formula

Dynamic Pressure Head = (Fluid Velocity^(2))/(2*Acceleration Due To Gravity)
h_d = (u_Fluid^(2))/(2*g)

What is dynamic pressure?

Dynamic Pressure is defined as the pressure on a surface at which a flowing fluid is brought to rest in excess of the pressure on it when the fluid is not flowing. Dynamic pressure is the kinetic energy per unit volume of a fluid. In simplified cases, the dynamic pressure is equal to the difference between the stagnation pressure and the static pressure

How to Calculate Dynamic Pressure Head-Pitot Tube?

Dynamic Pressure Head-Pitot Tube calculator uses Dynamic Pressure Head = (Fluid Velocity^(2))/(2*Acceleration Due To Gravity) to calculate the Dynamic Pressure Head, Dynamic Pressure head-pitot tube id the distance between the static pressure head and the stagnation pressure head. Dynamic Pressure Head is denoted by h_d symbol.

How to calculate Dynamic Pressure Head-Pitot Tube using this online calculator? To use this online calculator for Dynamic Pressure Head-Pitot Tube, enter Fluid Velocity (u_Fluid) & Acceleration Due To Gravity (g) and hit the calculate button. Here is how the Dynamic Pressure Head-Pitot Tube calculation can be explained with given input values -> 7.6E+6 = (12.22^(2))/(2*9.8).

FAQ

What is Dynamic Pressure Head-Pitot Tube?

Dynamic Pressure head-pitot tube id the distance between the static pressure head and the stagnation pressure head and is represented as h_d = (u_Fluid^(2))/(2*g) or Dynamic Pressure Head = (Fluid Velocity^(2))/(2*Acceleration Due To Gravity). Fluid velocity is the volume of fluid flowing in the given vessel per unit cross sectional area & The Acceleration Due To Gravity is acceleration gained by an object because of gravitational force.

How to calculate Dynamic Pressure Head-Pitot Tube?

Dynamic Pressure head-pitot tube id the distance between the static pressure head and the stagnation pressure head is calculated using Dynamic Pressure Head = (Fluid Velocity^(2))/(2*Acceleration Due To Gravity). To calculate Dynamic Pressure Head-Pitot Tube, you need Fluid Velocity (u_Fluid) & Acceleration Due To Gravity (g). With our tool, you need to enter the respective value for Fluid Velocity & Acceleration Due To Gravity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search